Panasonic Blu Ray Disc Home Theater Sound System Sc Bt100 Operating Instructions

							11
RQT9129
!POWER button (POWERÍ/I) (>14)
Press to switch the unit from on to standby mode or vice-versa. In 
standby mode, the unit is still consuming a small amount of power.
@Standby/on indicator (Í)
When the unit is connected to the household AC outlet, this 
indicator lights up in standby mode and goes out when the unit is 
turned on.
#Open or close the disc tray (>14)
$SW BOOST (Subwoofer boost) button
Turn Subwoofer boost on/off (>26)
%SW BOOST (Subwoofer boost) indicator
Lights when Subwoofer boost is on (>26)
^7.1CH D.S.P. indicator
Illuminated during 7.1ch source playback.
&Select the source
BD/DVD/CD") SD") FM")AM")IPOD")D-IN")AU X
^"""""""""""""""""""""""""""""""b*Select the radio station manually (>18)
Search/Slow-motion/Skip (>15)
Search: Press and hold (During play)
Slow-motion: Press and hold (During pause)
Skip: Press
(Stop (>15)
AJStart play (>14)
AADisc tray (>14)
ABRemote control signal sensor
ACDisplay
ADAdjust the volume of the main unit (>14)
AEVolume indicator
≥It is possible to set the indicator to turn on/off. (>33, FL Display)
AFSD card slot (>14)
AGConnect iPod (>20)
AHHeadphone terminal (>14)
Rear panel terminals 
(>6–8, 35–36)
CAUTION
Do not place objects in front of the unit. The disc tray may collide with 
objects when it is opened, and this may cause injury.
!Drive indicator
≥The indicator blinks when reading data.
@SLEEP indicator (>16)
#Radio broadcast display
$Wireless link indicator
≥The indicator blinks when the wireless link is inactive for a long time.
%Main display section
^iPod indicator
&Audio signal indicator
Main unit
D.S.P.7.1CHBOOSTSWSELECTOR
 

 







Place your finger on the 4 section 
and open it diagonally downwards.
The unit’s display
96/24DTSST MMONOTUNEDSLPSDiPodDISC
W4S
W2SD D+
NEO:6
PLxHD



  
Lights when disc is ready to play.
Lights when iPod is ready to play.
Lights when SD card is ready to play.
Lights when receiving a radio broadcast (>18)
Lights when set to monaural reception (>18)
Lights when set to stereo broadcast reception (>18)
Flashes during preset channel registration (>9)
Lights when speaker setting (>33, Speaker, 34, 
Speaker settings) is set to 5.1ch and link with wireless 
system is activated
Lights when speaker setting (>33, Speaker, 34, 
Speaker settings) is set to 7.1ch and link with wireless 
system is activatedDISC
iPod
SD
TUNED
MONO
ST
M
W2S
W4S
Illuminated during iPod repeat playback (EXTENDED 
mode only, >21)
Illuminated during iPod shuffle playback (EXTENDED 
mode only, >21)
Lights when DTS decoder is being used.
Lights when DTS-HD decoder is being used.
Lights when DTS-ES decoder is being used.
Lights when DTS 96/24 decoder is being used.
Lights when Dolby Digital decoder is being used.
Lights when Dolby Digital Plus decoder is being 
used.
Lights when Dolby Pro Logic II decoder is being 
used.
Lights when Dolby Pro Logic IIx decoder is being 
used.
Lights when Dolby TrueHD decoder is being 
used.
Lights when DTS NEO:6 matrix decoder is being 
used.
DTS
DTS
DTS
96/24DTS
D
D+
PL
PLx
HD
NEO:6
Getting started
SC-BT100P-ENG.book  11 ページ  ２００８年２月２０日　水曜日　午後６時２２分 
						

							12
RQT9129
Disc and card information
This chart shows the different type of retail/commercial discs you can use, and also includes the industry-standard logos that should appear on 
the discs and/or packaging.
This chart shows the different type of discs recorded with DVD recorders, DVD video cameras, personal computers, etc. that you can use.
  This mark means you must finalize the disc with the DVD recorder, etc. before playback. For details about finalizing, refer to 
the operating instructions for your equipment.
This chart shows the different type of cards recorded with Panasonic High Definition Video Camera or personal computers, etc. that you can use.
§Including miniSD Card and microSD Card
≥When using from 4 GB to 16 GB SD cards, only SD cards that 
display the SDHC logo can be used.
≥This unit is compatible with SD Memory Cards that meet SD Card 
Specifications FAT12 and FAT16 formats, as well as SDHC Memory 
Cards in FAT32 format.
≥In these operating instructions, the cards shown in the table 
(Dabove) are comprehensively called SD cards.≥A miniSD Card and a microSD Card must be used with the 
attached adaptor that comes with the card.
≥Useable memory is slightly less than the card capacity.
≥If the SD card is formatted on a PC, you may not be able to 
use it on this unit. In this case, format the card on this unit 
(>24).
≥We recommend using a Panasonic SD card.
≥Keep the Memory Card out of reach of children to prevent 
swallowing.
≥When a card recorded in the AVCHD format is being played, the 
video may be paused for a few seconds at portions spliced, due to 
deletion or edition.
≥Switch the write-protect switch to the “LOCK” position to protect the 
content from accidental erasure.
Packaged discs
Type of media/
LogoFeatures Indicated asType of media/
LogoFeatures Indicated as
BD-VideoHigh Definition (HD) 
movie and music discs [BD-V]DVD-VideoHigh quality movie and 
music discs [DVD-V]
CD
Compact Discs (CD’s) 
that contain audio and 
music
≥Operation and sound 
quality of CDs that do 
not conform to CD-DA 
specifications (copy 
control CDs, etc.) 
cannot be guaranteed.[CD]
Recorded discs
Type of media/
LogoFormats Indicated asType of media/
LogoFormats Indicated as
BD-RE≥Version 3 of the 
BD-RE Recording 
For m at
≥JPEG format[BD-V]
[JPEG]DVD-R DL ≥DVD-Video Format
≥Version 1.2 of the DVD 
Video Recording 
For m at
≥AVCHD format[DVD-V]
[DVD-VR]
[AVCHD]
BD-R≥Version 2 of the BD-R 
Recording Format[BD-V]
+R/+RW/+R DL≥+VR (+R/+RW Video 
Recording) Format
≥AVCHD format[DVD-V]
[AVCHD]
DVD-RAM≥Version 1.1 of the DVD 
Video Recording 
For m at
≥JPEG format
≥AVCHD format[DVD-VR]
[JPEG]
[AVCHD]
CD-R/RW ≥CD-DA format
≥MP3 format
≥JPEG format[CD]
[MP3]
[JPEG]
DVD-R/RW ≥DVD-Video Format
≥Version 1.1 of the DVD 
Video Recording 
For m at
≥AVCHD format[DVD-V]
[DVD-VR]
[AVCHD]≥It may not be possible to play the above discs in some cases 
due to the type of discs, the condition of the recording, the 
recording method and how the files were created.
≥When a disc recorded in the AVCHD format is being played, the 
video may be paused for a few seconds at portions spliced, due 
to deletion or editing.
SD cards
Finalized
Finalized
Finalized
Finalized
Finalized
Type of mediaFormats Indicated as
SD Memory Card§
(from 8 MB to 2 GB)SDHC Memory Card(from 4 GB to 16 GB)≥JPEG format
≥AVCHD 
for mat[JPEG]
[AVCHD]
ADAPTER
SC-BT100P-ENG.book  12 ページ  ２００８年２月２０日　水曜日　午後６時２２分 
						

							13
RQT9129
≥Enjoy Final Standard Profile functions (>24), such as picture-in-picture. The various functions differ depending on the disc.
≥When playing a set of two or more BD-Video discs, the menu screen may continue to display even if the disc has been ejected.
≥Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio and DTS-HD High Resolution Audio are output as Dolby Digital when “BD-Video 
Secondary Audio” (>33) is set to “On”.
The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so play 
may not be possible.
§1ISO9660 level 1 or 2 (except for extended formats), Joliet
This unit is compatible with multi-session.
This unit is not compatible with packet writing.
§2Discs must conform to UDF 2.0.
§3Discs must conform to UDF 2.5.§4Design rule for Camera File system: unified standard established 
by Japan Electronics and Information Technology Industries 
Association (JEITA).
Structure of MP3 and still pictures (JPEG) folders
You can play MP3 and still pictures (JPEG) with this unit by making folders on disc as shown 
(Dright).
≥Folder structure created on a DVD-RAM, BD-RE or an SD card is not displayed.
MP3 files and folders in CD-R/RW
Prefix with 3-digit numbers in the order you want to play them.
Still pictures (JPEG) in CD-R/RW
Files inside a folder are displayed in the order they were updated or taken.
When the highest level folders are “DCIM” folders, they are displayed first on the tree.
≥BD-Video discs recorded at a rate of 50 frame per second
≥BD-RE with the cartridge 
≥DVD-RAM that cannot be removed from their cartridges
≥2.6 GB and 5.2 GB DVD-RAM
≥3.95 GB and 4.7 GB DVD-R for Authoring
≥Version 1.0 of DVD-RW
≥+R 8 cm (3z), DVD-ROM, CD-ROM, CDV, SACD, Photo CD, 
MV-Disc and PD≥DVD-Audio
≥Video CD and SVCD
≥WMA discs
≥DivX discs
≥PA L  d i s c s
≥HD DVD
≥Other discs that are not specifically supported 
Regarding BD-Video
Note about using a DualDisc
Tips for making MP3/JPEG discs
File formatMP3JPEG
Playable media
CD-R/RW§1CD-R/RW§1, DVD-RAM§2, BD-RE§3, SD card
ExtensionFiles must have the extension “.mp3” or “.MP3”. Files must have the extension “.jpg” or “.JPG”.
Picture resolution— between 34k34 and 5120k3840 pixels
(sub sampling is 4:2:2 or 4:2:0)
Bit rates32 kbps to 320 kbps —
Sampling frequency44.1 kHz/48 kHz —
ReferenceID3 tags: version 1, 2.2, 2.3, 2.4
ID3 is a tag embedded in MP3 track to provide information 
about the track.
This unit supports the versions listed above but only titles 
and the names of artists can be displayed.
≥If there is a large amount of still picture data etc. within a 
MP3 file, play may not be possible.≥MOTION JPEG: not supported
≥SD card: JPEG conforming DCF§4 (Design rule for 
Camera File system)
Thawing Time: approx. 2 sec. (7M pixels)
≥English alphabet and Arabic numerals are displayed correctly. Other characters may not be displayed correctly.
≥The display order on this unit may differ from how the order is displayed on a computer.
≥Depending on how you create the media (writing software), files and folders may not play in the order you numbered 
them.
≥This unit is not compatible with packet-write format.
≥Depending on the recording conditions, the media may not play.
≥Operation may take time to complete when there are many files and/or folders and some files may not display or be 
playable.
001
P0000010.jpg
P0000011.jpg
P0000012.jpg
P0000003.jpg
P0000004.jpg
P0000005.jpg
P0000001.jpg
P0000002.jpg
P0000006.jpg
P0000007.jpg
P0000008.jpg
P0000009.jpgRoot
Order of play
002 Folder
003 Folder
004 Folder
e.g.,
Discs that cannot be played
Getting started
SC-BT100P-ENG.book  13 ページ  ２００８年２月２０日　水曜日　午後６時２２分 
						

							14
RQT9129
Basic play (Playing video contents)
PreparationTurn on the TV and select the appropriate video input on the TV.VIDEO1



Skip/Search/Slow-motion
SELECTORStop
Play
`,_VO L U ME
Headphones (not included)
Headphone plug type: ‰3.5 mm (
1/8z) stereo mini plug
≥Reduce the volume before connecting.
≥Audio is automatically switched to 2-channel stereo.
≥To  p r event hearing damage, avoid listening for prolonged periods of time.
Excessive sound pressure from earphones and headphones can cause hearing loss. Label facing up Press [
						

							15
RQT9129
(Continued on the next page)
Other operations during play (These functions may not work depending on the disc.)
Stop
The stopped position is memorized.
Resume play function
Press [1] (PLAY) to restart from this position.
≥The position is cleared if the tray is opened or you press 
[∫] several times to display “STOP” 
on unit’s display.
Pause
≥Press [;] again or [1] (PLAY) to restart play. 
Search/Slow-motion
The speed increases up to 5 steps.
≥Press [1] (PLAY) to revert to normal playback speed.
≥For some discs, the speed may not change.
SearchWhile playing, press [6] or [5].
≥Press and hold [:/6] or [9/5] on the main unit.
≥[BD-V] [AVCHD] [DVD-VR] [DVD-V]:
Audio is heard during first level of forward search.
≥[CD] [MP3]: The speed is fixed to a single step.
Slow-motionWhile paused, press [6] or [5].
≥Press and hold [:/6] or [9/5] on the main unit.
≥[BD-V] [AVCHD]: Forward direction [5] only.
≥[DVD-VR]: If continued for approx. 5 minutes, slow-motion play pauses automatically.
Skip
Skip to the title, chapter or track you want to play.
≥Each press increases the number of skips.
Adjust the volume
Starting from a selected item
Play starts from the selected title or chapter.
[BD-V] [AVCHD]
e.g., 5: [0] B [0] B [5]
15: [0] B [1] B [5]
[DVD-V]
e.g., 5: [0] B [5]
15: [1] B [5]
≥While stopped (the image on the right is displayed on the screen), the title 
is designated. While playing, the chapter is designated.

STOP
PAUSE
SLOW/SEARCH
SKIP
Basic
operations
SC-BT100P-ENG.book  15 ページ  ２００８年２月２０日　水曜日　午後６時２２分 
						

							16
RQT9129
Basic play (Playing video contents)
Other operations during play (These functions may not work depending on the disc.)
Frame-by-frame
While paused, press [2] (2;) or [1] (;1).
Each press shows the next frame.
≥Press and hold to change in succession forward or backward.
≥Press [1](PLAY) to revert to normal playback speed.
≥[BD-V] [AVCHD]: Forward direction [1] (;1) only.
Changing audio during play
[BD-V] [AVCHD] [DVD-V]
You can change the audio channel number each time you press 
the button. This allows you to change the soundtrack language 
(>30, Soundtrack), etc.
[BD-V]
When “BD-Video Secondary Audio” (>33) is set to “On”, Dolby 
TrueHD, Dolby Digital Plus, DTS-HD Master Audio and DTS-HD 
High Resolution Audio are output as Dolby Digital regardless of 
this setting.
[DVD-VR]
AudioLR>AudioL>Audio R
^---------------------------------}
Muting the sound
“MUTING” flashes on the unit’s display.
≥To cancel, press [MUTING] again or adjust the volume.
≥Muting is canceled when you switch the unit to standby.
Status messages
The status messages give you information about what is currently 
being played. Each time you press [STATUS], the information 
displayed will change.
OK
AU DIO
Soundtrack 1 ENG Digital  3/2.1ch 
English is selected. e.g., [DVD-V]
PlayDVD-RAM(VR)
AudioLR“AudioLR” is 
selected
Play BD-Video 
 T1     C1     0:05.14 0:20.52 

T: Title
C: ChapterPL: Playlist
Items change depending on the disc 
played. No display
Current positionType of disc
Play status
Elapsed time in the title e.g., [BD-V]
Depending on the kind of disc or the playback status, 
this display may not appear.Total time
Screen Aspect
When black bars are shown at the top, bottom, left, and right sides 
of the screen, you can enlarge the image to fill the screen.
1Press [SUB MENU].
2Press [3,4] to select “Screen 
Aspect” and press [OK].
3Press [2,1] to select “Side cut” 
or “Zoom”.
Normal: Normal output
Side cut: The black bars on the right and left sides of the 16:9 
image disappear and the image is enlarged. Please note 
that the right and left sides of the image are cut off when 
the black bar is not displayed.
Zoom: The black bars on the top and bottom sides of the 4:3 
image disappear and the image is enlarged. Please note 
that the top and bottom sides of the image are cut off 
when the black bar is not displayed.
≥When “TV Aspect” (>33) is set to “4:3 Pan & Scan” or “4:3 
Letterbox”, the “Zoom” effect is disabled.
To exit the screen
Press [RETURN].
Setting the sleep timer
Press [SLEEP] to select the time (in minutes).
SLEEP 30 ) SLEEP 60 ) SLEEP 90 )SLEEP 120 )OFF
^""""""""""""""""""""""""""""""""b
To confirm the remaining time
Press [SLEEP] again.
Chapter playback [DVD-VR]
1While “Title View” screen is displayed
Press [3,4] to select the title 
and press [SUB MENU].
2Press [3,4] to select “View 
Chapters” and press [OK].
Properties: To display the title properties (recording date, etc.)
To picture: Playing still pictures (>22)
3Press [2,1] to select the chapter and press 
[OK].
To exit the screen
Press [SUB MENU].
Enjoying stereo sources with surround 
sound effect
You can enhance stereo sources with surround sound effect.
To enjoy stereo sources in surround sound with Dolby Pro 
Logic II/Dolby Pro Logic IIx
Press [ÎPLIIx].
To enjoy stereo sources in surround sound with DTS NEO:6
Press [NEO:6].
For more detailed information on this operation, please refer to the 
“Enjoying surround sound” section on page 27.
Pop-up Menu
Screen Aspect
To p  M e n u
OKRETURNSUB
MENUS
e.g., [BD-V]
SLEEP
SLP
Properties
View Chapters
To picture
SC-BT100P-ENG.book  16 ページ  ２００８年２月２０日　水曜日　午後６時２２分 
						

							17
RQT9129
Enjoying TV with this unit’s speakers
You can enjoy TV broadcasts with this unit’s speakers.
Preparation
Confirm the audio connection to the OPTICAL IN or AUX terminal on the main unit (>7).
1Press [N, O SELECT] several times to select “D-IN” (DIGITAL IN) or 
“AUX”.
Main unit: Press [SELECTOR].
≥D-IN (DIGITAL IN): When connecting using OPTICAL IN terminal.
≥AU X: When connecting using AUX terminal.
≥When the system is connected to an HDAVI Control 2 or HDAVI Control 3-compatible TV via 
an HDMI cable, TV broadcast audio is output through the system speakers if the TV input is 
switched to TV tuner mode. See “Setting the TV audio for VIERA Link “HDAVI Control”” on 
page 28 for setting method.
≥Reduce the volume on the TV to its minimum, and then adjust the volume of the main unit.
Enjoying TV sound from all speakers
You can enhance stereo sources with surround sound effect.
To enjoy TV in surround sound with Dolby Pro Logic II/Dolby Pro Logic IIx
Press [ÎPLIIx].
To enjoy TV in surround sound with DTS NEO:6
Press [NEO:6].
For more detailed information on this operation, please refer to the “Enjoying surround sound” 
section on page 27.
Making settings for digital audio input
Select to suit the type of audio from the OPTICAL IN terminal on the main unit.
1Press [N, O SELECT] several times to select “D-IN” (DIGITAL IN).
Main unit: Press [SELECTOR].
2Press [SETUP].
3Press [3,4] to select “DUAL”, “DRC” or “PCM FIX” and press 
[OK].
4While the selected mode is displayed
Press [3,4] to make the setting.
DUAL mode (Only works with Dolby Dual Mono)
MAIN
SAP 
M+S (MAIN+SAP) (stereo audio)
“SAP” = Secondary Audio Program
≥If this is set to “MAIN” or to “SAP”, the PCM FIX modes (>below) will automatically be 
set to “OFF”.   
DRC (Dynamic Range Compression)
ON: Adjust for clarity even when the volume is low by compressing the range of 
the lowest sound level and the highest sound level. Convenient for late 
night viewing. (Only works with Dolby Digital)
OFF
PCM FIX modes
ON: Select when receiving only PCM signals.
OFF: Select when receiving Dolby Digital and PCM signals.
≥If this is set to “ON”, the DUAL mode (>above) will automatically be set to “M+S”.
≥Audio that is input through the OPTICAL IN terminal cannot be output through the HDMI 
terminal.
[N, O SELECT]
[OK]
[3,4]
[SETUP] [SELECTOR]
[NEO:6]
[ÎPLIIx]
Basic
operations
SC-BT100P-ENG.book  17 ページ  ２００８年２月２０日　水曜日　午後６時２２分 
						

							18
RQT9129
Enjoying the FM/AM radio
Manual tuning
1Press [FM/AM] to select “FM” or “AM”.
Main unit: Press [SELECTOR].
2Press [6, 5] to select the frequency.
Main unit: Press [X] or [W].
≥When a radio broadcast is being received, “TUNED” lights in the 
display.
≥When a stereo broadcast is being received, “ST” lights in the 
display.
≥To start automatic tuning, press and hold [6, 5] until the frequency 
starts scrolling. Tuning stops when a station is found.
Presetting stations manually
Up to 30 stations can be set in each band, FM and AM.
1Press [FM/AM] to select “FM” or “AM”.
2Press [6, 5] to select the frequency.
3Press [OK].
“P” and “M” begin to flash.
4Press the numbered buttons to enter 
preset channel number.
≥To select a 1-digit number
e.g., “1”: [1]>[OK].
≥To select a 2-digit number
e.g., “12”: [1]>[2].
≥A station previously stored is overwritten when another station is stored in the same 
channel preset.
≥Repeat steps 2 to 4 to set other stations.
Selecting the preset channels
1Press [FM/AM] to select “FM” or “AM”.
2Press the numbered buttons to select the channel.
≥To select a 1-digit number
e.g., “1”: [1]>[OK].
≥To select a 2-digit number
e.g., “12”: [1]>[2].
Alternatively, press [:, 9] or [2,1] to select the 
channel.
If noise is excessiveWhen “FM” is selected
Press [FM MODE] to display “MONO”.
≥Press the button again to cancel the mode.
≥The mode is also canceled when you change the frequency.
≥This setting can be preset for each broadcasting station. When 
“MONO” appears follow procedures 3 and 4 in “Presetting stations manually” 
(>above).
When “AM” is selected
Press [AM BP] to select “AM BP1” or “AM BP2” that receives good reception.
Each time you press the button:
AM BP1(.AM BP2 (BP=Beat Proof)
FM frequency step Main unit only
The step is factory-set to 0.2-MHz (200-kHz), but you can change it to receive 
broadcasts allocated in 0.1-MHz (100-kHz) steps.
1Press [SELECTOR] to select “FM”.
2Press and hold [SELECTOR].
After a few seconds the display changes to show the current minimum frequency. 
Continue to hold the button down. The minimum frequency changes and the step is 
changed.
To return to the original step, repeat steps 1 and 2.
After changing the setting, previously preset frequencies will be cleared. Preset them 
again.
[OK]
[2,1]
[FM MODE]
[AM BP] [6, 5]
[:, 9] Numbered 
buttons[FM/AM] [SELECTOR] [X], [W]
TUNED
STTUNED
M
e.g., “12”
e.g., “12”
NOTEMONOTUNED
TUNED
e.g., “AM BP1” is selected.
SC-BT100P-ENG.book  18 ページ  ２００８年２月２０日　水曜日　午後６時２２分 
						

							19
RQT9129
Playing music [CD] [MP3]
You can play generally available music CD or MP3 files recorded onto a CD-R/RW.
1Insert a disc (>14).
≥If a disc containing data in different file formats is inserted, the file selection 
menu may be displayed. Press [3,4] to select “MP3 Music” and press [OK].
≥If the menu is not displayed, press [BD/SD] to select “BD/DVD/CD”.
Main unit: Press [SELECTOR].
2Press [3,4] to select the track and press [OK].
Play starts on the selected track.
Enjoying music in surround sound
You can enhance stereo sources with surround sound effect.
To enjoy music in surround sound with Dolby Pro Logic II/Dolby Pro Logic IIx
Press [ÎPLIIx].
To enjoy music in surround sound with DTS NEO:6
Press [NEO:6].
For more detailed information on this operation, please refer to the “Enjoying surround sound” 
section on page 27.
Playing a track in another folder ([MP3] only)
1While the “Music list” is displayed
Press [SUB MENU], press [3,4] to select “Select Folder” and press [OK].
2Press [3,4] to select a folder and press [OK].
The “Music list” for the folder appears.
≥You cannot select folders that contain no compatible tracks.
≥To return to the previous screen
Press [RETURN].
≥Discs containing data in different file formats. 
To switch from the JPEG menu to MP3 menu, perform steps 
below.
1Press [FUNCTIONS].
2Press [3,4] to select “Menu” and press [OK].
3Press [3,4] to select “MP3 Music” and press [OK].
≥You can use search and skip functions (>15).
≥When the “Screen Saver Function” is set to “On” (>33), the 
screen switches to Screen Saver mode if there is no 
operation for 10 minutes after starting playback. (Playback 
continues.)
[OK]
[3,4,2,1]
[FUNCTIONS]
[RETURN]
[SUB MENU] [SELECTOR]
[BD/SD]
[NEO:6]
[ÎPLIIx]
TIPSCD 
MP3 Music 
Select an action or press [RETURN]. 
Pictures 
OK 
RETURN  SUB 
MENU 
 0.09   4.30 










DIRECT NAVIGATOR Music list 
CD 
No 
Tr a c k  Name Play Time Tr a c k 1  
Tr a c k 1  4min30sec  
3min41sec  
4min30sec  
3min11sec  
5min  2sec   Tr a c k 2  
5 Tracks / Total Play Time 20min54sec 
Tr a c k 3  
Tr a c k 4  
Tr a c k 5  
Play 
RETURN “ ” indicates the track currently playing.
e.g., [CD]
DIRECT NAVIGATOR Select Folder 
CD(MP3) 
    001 My favorite 
        002 Brazilian pops 
        003 Chinese pops 
        004 Czech pops 
        005 Hungarian pops 
        006 Liner notes 
        007 Japanese pops 
        
008 Mexican pops         009 Philippine pops 
        010 Swedish pops 
            011 Momoko 
    012 Standard number 
        013 Piano solo 
        014Vocal 
MP3 music 
    F  7/25 
OK 
RETURN 
Selected folder No. /Total folders
If the folder has no track, “– –” is 
displayed as folder number.
TIPS
OKRETURN
Other Functions
Menu
Input Select
Home theaterFUNCTIONS
CD(MP3/JPEG)
Basic
operations
SC-BT100P-ENG.book  19 ページ  ２００８年２月２０日　水曜日　午後６時２２分 
						

							20
RQT9129
Playing an iPod on this unit
iPod videos/photos can be displayed on TV, and iPod music can be enjoyed through the system speakers, by connecting your iPod to the Dock for 
iPod on the main unit.
Preparation≥To view videos/photos from the iPod.
– Ensure the video connection to the VIDEO OUT terminal on this unit (>7).
– Operate the iPod menu to make the appropriate video/photo output settings for your TV. (Refer to the operating instructions of your iPod.)
≥To display the picture, turn on the TV and select the appropriate video input mode.
≥Before connecting/disconnecting the iPod, turn the main unit off or reduce the volume of the main unit to its minimum.
Compatible iPod
Connection
1Open the Dock for iPod.
2Connect the iPod (not included) firmly.
Recharging starts when the iPod is inserted.
About dock adapter≥Attach the dock adapter which should be supplied 
with your iPod to the dock for the stable use of the 
iPod. If you need an adapter, consult your iPod 
dealer.
About recharging the battery≥iPod will start recharging regardless of whether this 
unit is on or off.
≥“IPOD ¢” will be shown on the main unit’s display 
during iPod charging in main unit standby mode.
≥Check iPod to see if the battery is fully recharged.
≥If you are not using iPod for an extended period of 
time after recharging has completed, disconnect it 
from main unit, as the battery will be depleted 
naturally. (Once fully recharged, additional 
recharging will not occur.) 
Place your finger on the 4 section 
and open it diagonally downwards.
Main unitDock for iPod
NOTE
iPod
Dock adapter
(not included)
Main unit e.g.,
≥Hold the dock when connecting/
disconnecting the iPod.
NameMemory size≥Compatibility depends on the software version of 
your iPod.
≥Aud io/video cannot be recorded or transmitted to 
iPods via this system.
≥Panasonic makes no warranty over iPod data 
management.
≥For more information, refer to the operating 
instructions for iPod.
≥The contents of the operating instructions and 
those displayed on iPod may differ partially, but this 
will not fundamentally affect use of music 
playback. iPod touch 8 GB, 16 GB
iPod nano 3rd generation (video) 4 GB, 8 GB
iPod classic 80 GB, 160 GB
iPod nano 2nd generation (aluminum) 2 GB, 4 GB, 8 GB
iPod 5th generation (video) 60 GB, 80 GB
iPod 5th generation (video) 30 GB
iPod nano 1st generation 1 GB, 2 GB, 4 GB
iPod 4th generation (color display) 40 GB, 60 GB
iPod 4th generation (color display) 20 GB, 30 GB
iPod 4th generation 40 GB
iPod 4th generation 20 GB
iPod mini 4 GB, 6 GB
NOTE
SC-BT100P-ENG.book  20 ページ  ２００８年２月２０日　水曜日　午後６時２２分