Panasonic BB-HCM311A, BB-HCM331A, BB-HCM371A, BB-HCM381A Owners Manual

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 11
Changing the Name of Viewnetcam.com to DynamicDNS, 
Moving the Position of Buffer/Transfer, and Adding the Menu
Changing to the name of DynamicDNS, and moving Buffer/Transfer ,and adding 
the menu on the Setup window.
Basic
(1)DynamicDNSRegisters with the DynamicDNS service.
(2)CameraSets camera name, white balance, pan/tilt range, return to 
specified position and color night view settings.
Buffer/Transfer...

Operating Instructions (Additional Features)
12
Registering User-specified DynamicDNS
DynamicDNS service is a service that allows you to assign an easy-to-remember 
name to the camera, similar to your favorite web site. DynamicDNS service also 
allows you to easily access the camera, even when your ISP changes the IP 
address. We recommend registering with it for the Internet access to the camera.
1.Click [DynamicDNS] on the Setup page.
2.Check [User-specified DynamicDNS], and click [Next].
 Clicking...

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 13
Note
 It may take several minutes for the registered URL to connect.
 Some DynamicDNS service is not connected.
Confirming the Internet access
Due to the router specifications, the image may not be displayed even if you access 
the camera from your PC on the same LAN as the camera. In this case, access the 
camera in the following procedures.
 Accessing from the PC on another network
 Accessing from your...

Operating Instructions (Additional Features)
14
[Time] on the Camera Page
[Time] of Return to Specified Position on the Camera page is changed.
SettingDescription
Return to 
Specified 
Pos i ti o n If the camera is not operated during the specified period, 
the camera turns to the specified position.
 The following settings are available.
– Time - Do not move, 10 s, 20 s, 30 s, 1 min, 5 min, 10 
min, 30 min, 1 h
– Specified Position - Home Position, Preset No.1–20, 
Alarm No.1, Alarm No.2
Note
 If you...

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 15
The input characters are changed when you set [FTP] for Transfer 
Method
[Space], [], [&], [] are also available as a input characters for Login ID and 
Password.
SettingDescription
Login ID If your ISP requires a login ID, set it (0—63 characters). 
[] is not available.
Password If your ISP requires a password, set it (0—63 
characters). [] is not available. 

Operating Instructions (Additional Features)
16
The Port numbers are available and the input characters are 
changed when you set [E-mail] for Transfer Method
 The Port numbers are available for SMTP Server and POP3 Server.
 [Space], [], [&], [] are also available as a input characters for Login ID, 
Password, Reply E-mail Address and Destination Email Address 1–3.
SettingDescription
Por t  N o. Enter the number (1—65535) for POP3 Server. Usually 
set to 25.
Por t  N o. Enter the number (1—65535) for...

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 17
Procedures of Buffering or Transferring Images
The procedures from this page to page 39 are described about settings of the 
image buffer or transfer. See the procedures below to understand the general 
outline of the settings.
Buffer/Transfer by Timer (See 
the Buffering or Transferring 
Images by Timer section in the 
Operating Instructions.)
Transfer Method 
(Select one from the lists.)
 No Transfer, No...

Operating Instructions (Additional Features)
18
Buffering or Transferring Images by Alarm Signal
You can buffer the camera images, transfer to an FTP server or send E-mails using 
alarm as a trigger.
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
1.Click [Trigger] on the Setup page.
2.Click No. to enable Trigger.
3.Check [Enable Image Buffer/Transfer], select [Alarm 1 or 2] for trigger, select 
[Rising: GND to Open (High).] or [Falling: Open (High) to GND.] and click...

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 19
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer.
 Clicking [

Operating Instructions (Additional Features)
20
5.Set the Lens Position When Triggered setting, and click [Next>].
Note
If you enable the Lens Position When Triggered setting, buffer/transfer starts 
after the camera turns to the alarm position.
 Clicking [].
 Clicking [