Panasonic Bb Hcm110 Owners Manual

Additional Feature table
The following features are added to the camera. Read both the Operating 
Instructions manuals before using the product.
Additional Features Contents Page
Error messages and screen 
colorWhen general or guest users access 
the Single Camera page outside the 
Operation Time, or when over 30 (the 
maximum number) users access the 
page simultaneously, a gray screen 
and error messages will be displayed 
on the page.page 3
Increase in the number of preset 
positionsUp to 20 preset...

Operating Instructions (Additional Features)
2
Trademarks
 This software is based in part on the work of the Independent JPEG Group.
 All other trademarks identified herein are the property of their respective 
owners.
Abbreviations
 Network Camera is called Camera in this Operating Instructions. Increase in the number of preset 
positions on your cell phoneStill images from 20 preset positions 
can be viewed from a compatible cell 
phone over the Internet.page 10 Additional Features Contents Page 

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 3
Error messages and screen color
When general or guest users access the Single Camera page outside the 
Operation Time, or when over 30 (the maximum number) users access the page 
simultaneously, a gray screen and error messages will be displayed on the page.
Error Message Cause and Remedy
Operation time has 
been specified.When general or guest users access the Single Camera 
page outside the Operation Time, a...

Operating Instructions (Additional Features)
4
Increase in the number of preset positions
Up to 20 preset positions can be registered. These positions can be changed.
 Registered buttons are shown in blue.
 Unregistered buttons are shown in white.
1.Click [Program].
 [Program] switches to [Cancel]. 
Click [Cancel] to quit without saving 
changes.
2.Pan and tilt the camera to a desired 
position.
3.Select a preset position (1–20) from 
drop-down list, and enter the preset 
name.
E.g.:
Setting Center...

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 5
Note
 Only an administrator can register preset positions.
 When registering preset positions, the camera also saves brightness and 
white balance settings. The digital zoom value will not be saved.
 The registered preset positions can be selected in the Specified Position 
of Return to Specified Position on the Camera page. (See page 7)
 The registered preset positions can be selected in the Lens Position...

Operating Instructions (Additional Features)
6
Changing or Deleting the Settings
1.
Click [Program].
 [Program] switches to [Cancel]. 
Click [Cancel] to quit without saving 
changes.
2.Pan and tilt the camera to a desired 
position.
 When deleting, this step is not 
necessary.
3.Click the home position, alarm position 
or a preset number (1–20).
Note
All the items can be selected from the 
drop-down list. It is also possible to set 
positions 1–8 by clicking the preset 
buttons.
4.Click [Save] after...

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 7
[Time] on the Camera Page
[Time] of Return to Specified Position on the Camera page is changed.
Setting Description
Return to 
Specified 
Po s i ti o n If the camera is not operated during the specified period, 
the camera turns to the specified position.
 The following settings are available.
– Time - Do not move, 10 s, 20 s, 30 s, 1 min, 5 min, 10 
min, 30 min, 1 h
– Specified Position - Home Position, Preset...

Operating Instructions (Additional Features)
8
The Lens Position When Triggered by alarm signal when 
buffering or transferring images
One of 20 registered preset positions, as well as the home position or alarm 
positions 1–2, can be selected for the Lens Position When Triggered by alarm 
signal. Images from this position will be buffered or transferred.
Note
If you enable the Lens Position When Triggered setting, buffer/transfer starts 
after the camera turns to the home position, alarm positions 1–2...

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 9
The Lens Position When Triggered by motion detection when 
buffering or transferring images
One of 20 registered preset positions, as well as the home position or alarm 
positions 1–2, can be selected for the Lens Position When Triggered by motion 
detection. Images from this position will be buffered or transferred.
Note
If you enable the Lens Position When Triggered setting, buffer/transfer starts 
after the...

Operating Instructions (Additional Features)
10
Increase in the number of preset positions on your cell phone
Still images from 20 preset positions can be viewed from a compatible cell phone 
over the Internet.
You can view registered preset positions by 
clicking links.
Displays up to 50 logs chronologically. The logs 
are displayed only for an administrator.
Goes to the control page.
Displays the number of new logs.
Displays the date and time, the kind of signal and 
sensor.
Goes to the control page....