Panasonic Bb Hcm110 Installation Guide

							Installation
Network Camera
Model No.KX-HCM110A
2005 Panasonic Communications Co., Ltd. All Rights Reserved.
PSQX3768ZB KK0305YT1056
No responsibility will be taken by our company with respect to consequences
resulting from the use, damage or both of the camera.
Trademarks
• Microsoft and Windows are either registered trademarks or trademarks of  Microsoft Corporation in the United States and/or other countries.
 Pentium is a trademark or registered trademark of Intel Corporation or its  subsidiaries in the United States and other countries.
 All other trademarks identified herein are the property of their respective  owners.
 This software is based in part on the work of the Independent JPEG Group. Abbreviations
 UPnP is the abbreviation for Universal Plug and Play.
 Network Camera is called Camera in this Installation.
Installation (This manual) (Included on the Setup CD-ROM)
This manual provides explanations for items included with the camera.
Getting Started (Included on the Setup CD-ROM)
Getting Started provides explanations for the initial configuration and 
the ways of camera mount. The Getting Started helps you to  easily configure the camera.
Operating Instructions (Included on the Setup CD-ROM)
Operating Instructions explains about operations, settings, features and 
the cleaning method when using the camera.
Troubleshooting (Included on the Setup CD-ROM)
Troubleshooting provides explanations for troubleshooting tips.
How to Use This Documentation
The camera includes the following 4 manual types.
FCC and Other Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC  Rules. These limits are 
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,  uses and can radiate radio
frequency energy and, if not installed and used in accordance with the i\
nstructions, may cause harmful interference to radio co mmunications. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm ful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the  interference by one or 
more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interf erence that may cause 
undesired operation.
Environment:
Do not install the camera where the temperature is less than 0 C (+32 F) or greater than +40 C (+104 F). Allow 10 cm (4 inc hes) clearance around 
the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.
Routine care:
Wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder.
When you leave the unit unused for a long period of time, disconnect the AC adaptor cord from the outlet.
If you have any problems:
Consult an authorized Panasonic Factory Service Center.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to  operate this device.
Please read this manual before using and save this manual for future 
reference.
Panasonic Network Camera Website: http://www.panasonic.com/netcam for 
customers in the USA or Puerto Rico
Audio and Video Recording Notice:
PLEASE NOTE that under certain circumstances, audio/video recording may be PROHIBITED by law. This device should be used only i n compliance with 
all applicable federal, state and local statutes.
CR Coin Cell Lithium Battery Information:
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
IMPORTANT SAFETY INSTRUCTIONS
When using this unit, basic safety precautions should always be 
followed to reduce the risk of fire, electric shock, or personal injury.
SAVE THESE  INSTRUCTIONS 1. Read and understand all instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. After taking away the sand or the dust on the lens cover, wipe the lens \
 cover with a dry cloth.
6. Do not block any ventilation openings. Install in accordance with the  manufacturers instructions.
7. Do not install near any heat sources such as radiators, heat registers, \
 stoves, or other devices (including amplifiers) that produce heat.
8. Protect the AC adaptor cord and AC cord from being walked on or  pinched particularly at plugs, convenience receptacles, and the point 
where they exit from the unit.
9. The AC cord is used as the main disconnect device, ensure that the  socket-outlet is located/installed near the equipment and is easily 
accessible.
10. Only use attachments/accessories such as stand specified by the  manufacturer.
11. Do not touch the unit or the AC adaptor cord and AC cord during  lightning storms.
12. Unplug the unit when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is require\
d  when the unit has been damaged in any way, such as when the AC 
adaptor, AC cord or plug is damaged, the unit does not operate 
normally, or after the unit has been dropped.
14. The camera is intended for indoor use only. Prolonged exposure to  direct sunlight or halogen light may damage CMOS sensor.
15. Unplug this unit from power outlets if it emits smoke, an abnormal  smell or makes unusual noise. These conditions can cause fire or 
electric shock. Confirm that smoke has stopped and contact an 
authorized service center. 
						

							Your PC (P ersonal Computer) and netw ork m ust meet the f ollowing 
technical specifications f or the camera to work proper ly.
ItemDescription
Operating
System
Microsoft
Microsoft
•	 For vie wing single camera
Pentium
•	 For vie wing m ultiple cameras
Pentium 4 (1.8 GHz or g reater is recommended.)
CPU
ProtocolTCP/IP protocol (HTTP , TCP , UDP , IP, DNS , ARP, ICMP)
10/100 Mbps netw ork card installed
W eb Br owserInter net Explorer 6.0 or later 
(Not included on the Setup CD-R OM)
Audio input/output f eature (Microphone or speak er)
Interface
Audio
ItemDescription
Operating
System
Microsoft
•	 For vie wing single camera
Pentium III (800 MHz or g reater is recommended.)
•	For vie wing m ultiple cameras
Pentium 4 (1.8 GHz or g reater is recommended.)
CPU
ProtocolTCP/IP protocol 
(HTTP , TCP , UDP , IP, DNS , ICMPv6, NDP)
10/100 Mbps netw ork card installed
W eb Br owserInter net Explorer 6.0 or later 
(Not included on the Setup CD-R OM)
Audio input/output f eature (Microphone or speak er)
Interface
Audio
For IPv6 Connection
When using this product, tak e appropriate measures to a void the f ollowing 
secur ity breaches .
•	Leaks of pr ivate inf ormation via this product
•	 Illegal use of this product b y a third party
•	Interf erence or suspension of the use of this product b y a third party
Tak e the f ollowing measures to a void secur ity breaches:
•	To pre vent illegal access , keep the update fir mware 
(If y ou do not ha ve the latest v ersion of firmware, this can lead to 
b loc ked access or inf ormation leaks).
•	 You are responsib le for the secur ity settings, such as user name and 
password, to access this product.  This inf ormation should not be made 
availab le to an y third par ties outside the user g roup.
•	Mount the camer a where the camer a will not be stolen.
•	You are responsib le for this products user inf ormation, such as videos , 
still images and internet contents etc. This inf ormation should not be 
made a vailab le to an y third par ties outside the user g roup.
•	When sending this product to be repaired with a compan y not related to 
Panasonic , make bac k-up copies of files , if necessary, and reset this 
product to f actory default.
•	When tr ansferring this product to another par ty, mak e bac k-up copies of 
files, if necessar y, and reset this product to f actory default.
•	When disposing of this product, reset this product to f actory default, 
or erase inf ormation b y means of electr ical deletion or ph ysical 
dismantlement.
Main Unit. .  . .  . . . . . .  . . . . . . .  . 1 pc.A C Adaptor. .  . .  . . . . . .  . . . 1 pc.
Order No .: PQL V202Y
(Cord Length:  About 3 m [9.84 f eet])
AC Cor d  . . . . . . .  . . . . . .  . . . . . . 1 pc.
Order No .: PSJ A1069Z
(Cord Length:  About 1.8 m [5.91 f eet])
Setup CD-ROM   . . . .  . . . . . . 1 pc.
Order No .: PSQX3637ZCD
Fle xib le Stand .  . . . . .  . . . . . .  . .  1 pc.
Order No .: PSKL1020W
Installation
(This man ual) . . . . . .  . . . . . . .  .  1 pc.
Getting Star ted   . . . . .  . . . . . .  . .  1 pc.
Scre ws . . .  . . . . . . .  . . . . . .  . . .3 pcs .
Order No .: PQHE5004Y
The f ollowing items are pro vided with the camer a. 
Additional pieces can be ordered b y calling 1-800-332-5368.
System Requirements for your PC
For IPv4 Connection
What is IPv6?
•	IPv6 is shor t for Inter net Protocol  Version 6.
•	 IPv6 w as created to address the additional IP addresses that will be 
needed as the Inter net continues to expand.
•	IPv6 is e xpected to g radually replace IPv4, with the 2 coe xisting for a 
n umber of y ears during a transition per iod.
•	Though most ISPs (Inter net Service Pro viders) do not y et support IPv6, 
man y local netw orks already use it.  When y our ISP suppor ts IPv6, your 
P anasonic Netw ork Camer a will be ready!
•	For more inf ormation y ou wish to visit http://www .ipv6.org/.
Security Cautions
Included Items
Carefully pack your unit, preferably in the original carton.Attach a letter, detailing the symptom, to the outside of the carton.
Symptom
Send the unit to an authorized servicenter, prepaid and adequately insur\
ed.Do not send your unit to the Panasonic Consumer Electronics Company list\
ed below or toexecutive or regional sales offices. These locations do not repair consu\
mer products.
When you ship the product
Panasonic Servicenters are listed in the servicenter directory.Call 1-800-272-7033 for the location of an authorized servicenter.This Network Camera is designed for use in the United States of America.\
Sale or use of this product in other countries/areas may violate local l\
aws.
For product service
Panasonic Consumer Electr onics Company, Division of P anasonic Corporation of Nor th America
Panasonic Puer to Rico, Inc.
The information in this document is subject to change without notice.
Copyright:This mater ial is copyrighted b y Panasonic Comm unications Co., Ltd., and ma y be reproduced 
f or inter nal use only . All other reproduction, in whole or in par t, is prohibited without the written 
consent of P anasonic Comm unications Co., Ltd.
The use of a unique User Name and secret P asswor d is an 
impor tant tool that will help limit unauthoriz ed individuals from 
accessing the camera.  If you c hoose to disab le this tool, and 
c hoose not to limit access b y use of a User Name and P asswor d, 
this ma y result in access to the camera b y unauthorized individuals.  
(See pa ge 80 of the Operating Instructions on the Setup CD-R OM)
User Name and Passwor d Pr otection
Note
See P anasonic Netw ork Camer a suppor t website at 
http://panasonic.co.jp/pcc/pr oducts/en/netwkcam/ for details about 
netw ork en vironment.