Panasonic Bb Hca1ab Installation Guide

							Remove the Ceiling Mounting Cover.
Installation Guide
Camera Cover
Model No.BB-HCA1A-B (Smoke)
© 2005 Panasonic Communications Co., Ltd. All Rights Reserved.
PQQX14931ZAKK1205RM0
Confirm that the following items
are included.
Contact your dealer if you have a problem with the
included items.
❑Camera Cover ..........
1 pc. ❑Caps........................2 pcs.
❑Installation Guide 
(this manual) ..............
1 pc.✔
1Move the Ceiling Mounting Cover to the left until the   of it
fits to the   of the main unit.2Remove the Ceiling Mounting Cover by pulling it down.
Mark
Ceiling Mounting Cover
Indoor Use Only (For Ceiling Installation)
Ask the authorized dealer for the installation.
Supported Products (Customer-Provided) 
(as of Dec. 2005)
This product is a camera cover for the below cameras.
For the latest information, please visit the Panasonic website at
http://panasonic.co.jp/pcc/products/en/netwkcam/.
Useful Information
·
Dust on the camera cover affects the cameras image quality.
Especially when the camera is zoomed out at the end, it is difficult
to focus on the object due to the dust on the surface of the camera
cover. Remove the dust and wipe the camera cover with a dry cloth.
Note that wiping a dusty camera cover directly may cause scratch-
ing.
·In BB-HCE481A or BB-HCM381A, setting the automatic focus
range to [Normal] prevents the dust from affecting the image quality.
In KX-HCM280A or KX-HCM280, the image quality is improved in
the same way by manually focusing to the far side.
(See the cameras Operating Instructions for the settings.)
·The permeability of the camera cover is 36 %. The minimum illumi-
nance of the object is 9 lx in normal mode (without the cover: 3 lx),
and 0.27 lx in color night view mode (without the cover: 0.09 lx).
·The cameras indicator or Panasonic logo may be reflected into the
image depending on the location, the indicator setting or the zoom
magnification.
·In certain zoom magnification, using the camera cover may
decrease the image quality.
·Before using, remove the protective film. During shipment, the pro-
tective film should remain attached.
This product is for indoor use only.
Do not install this product outdoors.
Outdoor Installation may cause damage to the device.
BB-HCA1A-B (Smoke)
Compatible Cameras
Model No.: 
BB-HCE481A, BB-HCM381A, KX-HCM280A, KX-HCM280
Additional network camera models may become available for
use with this product.
Included Items
)$@(VJEF




1.


						

							Install the Camera Cover.
1Put the camera cover over the main unit
and hook the 2 tabs of the camera cover
to each hole in the plate.2Fasten the camera cover by turning it to
the right.3Attach the 2 caps to lock the cover to the
mounting bracket of the camera.
Hole
Ta b
Confirm that the 2 tabs are fit to 
each hole in the plate by watching 
through the openings.
Note
After the installation, dust, dirt or insects may 
get into the camera cover. Remove them by 
regularly removing the camera cover.
Groove
Wiring Without Making Holes in the Ceiling
Remove the notch from the camera cover and pass the wires
through the hole. Removing the Camera Cover
Insert a flat head screw driver into the groove and remove
the caps, this will unlock the camera cover from the mounting
bracket of the camera.
About 169 mm (6 5/8 inches) ×154 mm (6 1/16 inches) 
×169 mm (6 5/8 inches)
Specifications
Dimension (WHD)Weight
About 180  (0.4 lb.)
)$@(VJEF




1.