Panasonic Av Control Receiver Sa-xr700 Operating Instructions
Have a look at the manual Panasonic Av Control Receiver Sa-xr700 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Quick guide 11 RQT8739 • Unconnected speakers do not output the test signal. • Check connections and perform automatic speaker detection once again when a connected speaker does not output the test signal. (á pages 9 and 10) • When bi-wire speakers are connected (á page 20), press [SPEAKERS A] or [SPEAKERS B] to switch “ ” on. Testing speaker output Confirm audio output using the test signal after speakers are set. 1 To select “SPEAKERS A” Press to switch “ ” on. • If you select SPEAKERS B only, the test signal will not be output. 2 To test speaker output Press • Adjust the volume of front speakers to the normal listening level. • The test signal is output from one speaker at a time for two seconds in the order shown below. or (When you connect one surround back speaker) 3 To stop the test signal Press To make detailed settings To make various settings automaticallyWith the supplied setup microphone, the unit sets speaker distances, polarity, size, lowpass filter, frequency and levels automatically (á page 24). To set speakers the way you like“Adjusting speaker volumes” (á page 31) “Setting speakers and their sizes” (á page 35) “Setting distances” (á page 35) “Setting the lowpass filter” (á page 35) A SPEAKERSA AB SPEAKERS When SPEAKERS A and SPEAKERS B settings are selected A SPEAKERS When only the SPEAKERS A setting is selected TEST AUTO SBR SBL LS SW RSC LR SB LS SW RSC LR Speaker How speakers are displayed L : Front left C :Center R : Front right RS : Surround right LS : Surround left SBR : Surround back right SBL : Surround back left SB : Surround back (When you connect one surround back speaker) SW : Subwoofer TEST AUTO Note AB AB SPEAKERSBI-WIRE Set speakers and test speaker output
12 RQT8739 Watch DVDs or TV Turn the TV on and switch the TV’s input mode (to “HDMI” and others). Playback modes switch between 2-channel stereo and surround each time you press [SURROUND]. The “SURROUND” indicator is off during 2-channel stereo playback. See page 26. 1 To turn the unit on Press The “SURROUND” indicator lights on (factory setting).• The standby indicator “^” goes off when you turn the unit on. 2 To select “SPEAKERS A” Press to switch “ ” on. 3 To select “DVR ”, “BD/DVD” or “TV/STB ” Turn • Select the connected terminal when the names of the terminal and equipment you wish to use for playback do not match.You can also select the input source using the remote control (á page 5). 4 Watch DVDs or TV • The “HDMI” indicator lights on while communicating through HDMI connections. 5 To adjust the volume Turn Volume range: – – dB (minimum), – 79dB to 0dB (maximum) To finish watching Be sure to reduce the volume and press [8, POWER] to turn the unit to standby. When you play back sources using a CD player and other equipment Step 4 SPEAKERSW-MENU/-SETUPENTER INPUT SELECTOR VOLUME BI-AMP SURROUND SURROUND SPEAKERSAUTO DETECTOR -MULTI ROOM TUNE AUX ADVANCED DUAL AMP POWER WIRELESS READY AUTO SPEAKER SETUP SETUP MIC HDMI MULTI ROOM RETURN SURROUND SPEAKERSENTER-MENU/-SETUPAUTO DETECTOR -MULTI ROOMRETURNTUNESETUP MICW AUXS VIDEOVIDEOL-AUDIO-R A SPEAKERS “SURROUND” SURROUND “HDMI ” POWER VOLUME “ ” INPUT SELECTOR 8 POWER A SPEAKERSA A SPEAKERS INPUT SELECTOR Note VOLUME Note
Quick guide 13 RQT8739 Control with HDMI (Ez Sync™ HDAVI Control) • Only this unit turns off when you shut it down. Other connected equipment compatible with Ez Sync HDAVI Control stay on. • Audio output automatically switches to speakers on your TV (VIERA) when you turn the unit off. Audio output from the DVD recorder (DIGA) switches from speakers on the TV (VIERA) to speakers connected to the unit when you turn the unit on. • This unit goes from off to on, and speakers connected to this unit start making audio output when you set the TV (VIERA) to output sounds from the unit. • This unit automatically goes off when you switch your TV (VIERA) off. (This operation is unavailable when you set the input source as “TUNER ” or “CD ” on this unit.) • The input for the unit switches automatically to “DVR ” when a source is played back on the DVD recorder. • When pictures arrive after sounds, select “ON ” in “Adjusting audio timing to video timing” ( á page 38). • To set the unit against Ez Sync HDAVI Control, see page 37. • The remote control supplied with the TV (VIERA) may not work on the equipment connected to the BD/DVD player terminal when you connect Ez Sync HDAVI Control compatible equipment to both of the unit’s two HDMI input terminals. Enjoying sounds from the TV The input source for the unit switches to “TV/STB ” when you select a TV channel or operate the TV in other ways (á page 45). What is Ez Sync HDAVI Control? Ez Sync HDAVI Control is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) or DVD recorder (DIGA) under Ez Sync HDAVI Control. You can use this function by connecting the equipment with the HDMI cable. See the operating instructions for connected equipment for operational details. 1 Connect the unit to a Panasonic TV (VIERA) and DVD recorder (DIGA) under Ez Sync HDAVI Control using the HDMI cable. (It is recommended that you use Panasonic’s HDMI cable. Non- HDMI-compliant cables cannot be utilized.) 2 Make settings in the menu for the TV (VIERA) to activate linked Ez Sync HDAVI Control operations. 3 Perform the following steps to make sure the unit accurately identifies connected equipment. 1) Turn all equipment on. 2) Switch the TV (VIERA) off and then put it back on. 3) Switch the unit’s input to “DVR ” and make sure the TV (VIERA) correctly shows pictures. (Take these steps after changing connections or settings.) . Enjoying the Home Theater through one-touch operations Aim the remote control at the DVD recorder (DIGA) and press The following operations are automatically performed when you just press [ONE TOUCH PLAY]. 1 The DVD recorder goes on and starts playing back the recorded media in the selected drive (e.g. H D D, DV D ) . 2 The TV goes on and the TV input changes. 3 Surround playback starts after the unit is turned on and the input source for the unit switches to “DVR ”. To adjust the volume: Press You can also adjust the volume on your TV (VIERA)’s remote control. (A message informing the action appears on your TV while you adjust the volume.) • Press [u SKIP] to start playing a DVD disc or a recorded TV program again when playback does not start from the beginning. ïCDð S VIDEOVIDEODIGITAL IN (BD/ DVD PLAYER) (DVD RECODER)(TV/STB)OPTICAL1 OPTICAL2COAXIAL1 COAXIAL2 (BD/DVD PLAYER) INOUT OUT OUT IN IN IN IN IN INVCRDVD RECORDER DVD RECORDERTV MONITOR TV MONITORTV/STBCENTERBD/ DVD PLAYER BD/ DVD PLAYER (DVD RECORDER) IN LOOPEXTGND LOOPGND LOOPGND AM ANT FM ANT LOOP ANT GND TV (VIERA) DVD recorder (DIGA)HDMI (AV IN) HDMI (AV OUT)Rear panel DIGITAL AUDIO OUT (OPTICAL) You need an optical fiber cable for enjoying TV with surround sound. ONETOUCHPLAY DIRECTNAVIGATOR TOPMENUFUNCTIONS 0 CH VOLUME DISC SKIPSLOW/SEARCH STOPPAUSEPLAY DRIVE SELECTCM SKIP ENTER ENTER DIRECT TUNING XM CATXM CH ONETOUCHPLAY VOLUME Note Watch DVDs or TV/Control with HDMI (Ez Sync™ HDAVI Control)
14 RQT8739 Connections Connection cable (All cables are sold separately) • The input video signal can be sent out through an output terminal of the same type only. • See page 19 for connecting the unit to a cable box or satellite receiver. Connecting cables to video and audio terminals (to use the TV, DVD recorder, DVD player, VCR) Video cable Video connection cable Audio cable Optical fiber cable Coaxial cableStereo connection cable White Red(L) (R) ïCDð S VIDEOVIDEO L R CD DVD 6CH SUBWOOFERBD/DVD/ VCR TV/STB Y TV AUD IO DIGITAL IN DIGITAL TRANSCEIVER (BD/ DVD PLAYER) (DVD RECODER)(TV/STB)OPTICAL1 OPTICAL2COAXIAL1 COAXIAL2 XM (BD/DVD PLAYER) INOUT OUT OUT IN IN IN INININOUTSUBWOOFER SURROUNDFRONT ININ IN ININTV/STB VCRDVD RECORDER DVD RECORDER DVD RECORDERTV MONITOR TV MONITORTV/STB CENTERBD/ DVD PLAYER BD/ DVD PLAYER (DVD RECORDER) IN LOOPEXTGND LOOPGND LOOPGND AM ANT FM ANT LOOP ANT GND TV Rear panel Changing the digital input settings For example, you can connect the unit to a DVD player that makes optical output only by performing the steps instructed in “Changing the digital input settings” (á page 37). Insert the cable after making sure shapes match. How to connect the optical fiber cable Do not sharply bend the optical fiber cable.• To enjoy TV with surround sound, make additional connections instructed on page 17. VIDEO IN DIGITAL AUDIO OUT (COAXIAL)VIDEO OUTDIGITAL AUDIO OUT (OPTICAL)VIDEO OUT(R) (L) AUDIO OUTVIDEO OUT DVD player (BD player)DVD recorder VCR Note
15 RQT8739 Connection cable (All cables are sold separately) • The input video signal can be sent out through an output terminal of the same type only. • See page 19 for connecting the unit to a cable box or satellite receiver. Connecting cables to S video and audio terminals (to use the TV, DVD recorder, DVD player) Video cable S VIDEO connection cable Audio cable Optical fiber cable Coaxial cable ïCDð S VIDEOVIDEO L R CD DVD 6CH SUBWOOFERBD/DVD/ VCR TV/STB Y TV AUD IO DIGITAL IN DIGITAL TRANSCEIVER (BD/ DVD PLAYER) (DVD RECODER)(TV/STB)OPTICAL1 OPTICAL2COAXIAL1 COAXIAL2 XM LOOPEXTGND LOOPGND LOOPGND AM ANT FM ANT LOOP ANT GND (BD/DVD PLAYER) INOUT OUT OUT IN IN IN IN IN INOUTSUBWOOFER SURROUNDFRONT IN IN IN IN INTV/STB VCRDVD RECORDER DVD RECORDER DVD RECORDERTV MONITOR TV MONITORTV/STB CENTERBD/ DVD PLAYER BD/ DVD PLAYER (DVD RECORDER) IN TV S VIDEO IN Rear panel • To enjoy TV with surround sound, make additional connections instructed on page 17. Changing the digital input settings For example, you can connect the unit to a DVD player that makes optical output only by performing the steps instructed in “Changing the digital input settings” (á page 37). DVD player (BD player)DVD recorder DIGITAL AUDIO OUT (COAXIAL)S VIDEO OUTDIGITAL AUDIO OUT (OPTICAL) S VIDEO OUT Insert the cable after making sure shapes match. How to connect the optical fiber cable Do not sharply bend the optical fiber cable. Note • Turn off all equipment before making any connections. • Peripheral equipment sold separately unless otherwise indicated. • To connect equipment, refer to the appropriate operating instructions. Preparations Connections
16 RQT8739 Connections The component video terminals can produce more accurate colors than the S video terminals (á page 15). Connection cable (All cables are sold separately) • The input video signal can be sent out through an output terminal of the same type only. • See page 19 for connecting the unit to a cable box or satellite receiver. Connecting cables to component and audio terminals (to use the TV and DVD recorder) Video cableAudio cable Video connection cableOptical fiber cable ïCDð S VIDEOVIDEO L R CD DVD 6CH SUBWOOFERBD/DVD/ VCR TV/STB FRONTçA FRONTçB CENTER SURROUNDSURROUND BACK Y TV MONITOR OUTTV / STB IN DVD RECORDER IN PBPRSPEAKERS COMPONENT VIDEO HAUT-PARLEURSYY PBPRPBPR AC IN RL RL R LRBI-WIRE LF HF AUD IO DIGITAL IN DIGITAL TRANSCEIVER (BD/ DVD PLAYER) (DVD RECODER)(TV/STB)OPTICAL1 OPTICAL2COAXIAL1 COAXIAL2 XM LOOPEXTGND LOOPGND LOOPGND AM ANT FM ANT LOOP ANT GND (BD/DVD PLAYER) INOUT OUT OUT IN IN IN IN IN INOUTSUBWOOFER SURROUNDFRONT IN IN IN IN INTV/STB VCRDVD RECORDER DVD RECORDER DVD RECORDERTV MONITOR TV MONITORTV/STB CENTERBD/ DVD PLAYER BD/ DVD PLAYER (DVD RECORDER) IN YPBPR YPBPR TV COMPONENT VIDEO OUTRear panel “Changing the digital input settings” (á page 37)• To enjoy TV with surround sound, make additional connections instructed on page 17. DIGITAL AUDIO OUT (OPTICAL) DVD recorderCOMPONENT VIDEO IN Component video terminals The component video terminals (color-difference video terminals) output red (PR), blue (PB), and luminance (Y) signals separately. The terminals reproduce colors with greater accuracy for this reason. Insert the cable after making sure shapes match. How to connect the optical fiber cable Do not sharply bend the optical fiber cable. Note
17 RQT8739 Connection cable (All cables are sold separately) Make the following connections in addition to those instructed on pages 14 to 16. • Speakers produce sounds when you make connections for either digital audio (OPTICAL) output or analog audio output. Make connections according to your equipment and preference. • Use the optical fiber cable for connection when your TV has the digital output terminal. Other connections Video cable Video connection cable Audio cable Optical fiber cable Stereo connection cable To enjoy TV with surround sound To connect a DVD recorder with built-in VCR White Red(L) (R) ïCDð S VIDEOVIDEO L R CD DVD 6CH SUBWOOFERBD/DVD/ VCR TV/STB FRONTçA FRONTçB CENTER SURROUNDSURROUND BACK Y TV MONITOR OUT TV / STB INDVD RECORDER IN PBPRSPEAKERS COMPONENT VIDEO HAUT-PARLEURSYYPBPRPBPR AC IN RL RL R LRBI-WIRE LF HF AUDIO DIGITAL IN DIGITAL TRANSCEIVER (BD/ DVD PLAYER) (DVD RECODER)(TV/STB)OPTICAL1 OPTICAL2COAXIAL1 COAXIAL2 XM LOOPEXTGND LOOPGND LOOPGND AM ANT FM ANT LOOP ANT GND (BD/DVD PLAYER) INOUT OUT OUT IN IN IN IN ININOUTSUBWOOFER SURROUNDFRONT IN IN IN IN INTV/STB VCRDVD RECORDER DVD RECORDER DVD RECORDERTV MONITOR TV MONITORTV/STB CENTERBD/ DVD PLAYER BD/ DVD PLAYER (DVD RECORDER) IN TVDIGITAL AUDIO OUT (OPTICAL)AUDIO OUT (R) (L) Rear panel “Changing the digital input settings” (á page 37) ïCDð S VIDEOVIDEO L R CD DVD 6CH SUBWOOFERBD/DVD/ VCR TV/STB FRONTçA FRONTçB CENTER SURROUNDSURROUND BACK Y TV MONITOR OUT TV / STB INDVD RECORDER IN PBPRSPEAKERS COMPONENT VIDEO HAUT-PARLEURSYYPBPRPBPR AC IN RL RL R LRBI-WIRE LF HF AUD I O DIGITAL IN DIGITAL TRANSCEIVER (BD/ DVD PLAYER) (DVD RECODER)(TV/STB)OPTICAL1 OPTICAL2COAXIAL1 COAXIAL2 XM LOOPEXTGND LOOPGND LOOPGND AM ANT FM ANT LOOP ANT GND (BD/DVD PLAYER) INOUT OUT OUT IN IN IN INININOUTSUBWOOFER SURROUNDFRONT IN ININ ININTV/STB VCRDVD RECORDER DVD RECORDER DVD RECORDERTV MONITOR TV MONITORTV/STB CENTERBD/ DVD PLAYER BD/ DVD PLAYER (DVD RECORDER) IN Rear panel“Changing the digital input settings” (á page 37) DVD recorder with built-in VCR DVD OUT terminalsDVD/VCR COMMON OUT terminals DIGITAL AUDIO OUT (OPTICAL)VIDEO OUTVIDEO OUT • See page 26 for playback instructions. (R) (L) AUDIO OUTTV VIDEO IN Insert the cable after making sure shapes match. How to connect the optical fiber cable Do not sharply bend the optical fiber cable. Preparations Connections • Turn off all equipment before making any connections. • Peripheral equipment sold separately unless otherwise indicated. • To connect equipment, refer to the appropriate operating instructions.
18 RQT8739 Connections Connection cable (All cables are sold separately) Make analog connections according to your equipment and preference. See pages 14 to 16 for video connections. Other connections Video cable Video connection cableS VIDEO connection cable Audio cable Optical fiber cable Coaxial cableStereo connection cable To enjoy analog sounds To enjoy high-quality analog sounds using DVD-Audio discs (DVD analog 6-channel connections) White Red(L) (R) ïCDð S VIDEOVIDEO L R CD DVD 6CH SUBWOOFERBD/DVD/ VCR TV/STB FRONTçA FRONTçB CENTER SURROUNDSURROUND BACK Y TV MONITOR OUT TV / STB INDVD RECORDER IN PBPRSPEAKERS COMPONENT VIDEO HAUT-PARLEURSYYPBPRPBPR AC IN RL RL R LRBI-WIRE LF HF AUD IO DIGITAL IN DIGITAL TRANSCEIVER (BD/ DVD PLAYER) (DVD RECODER)(TV/STB)OPTICAL1 OPTICAL2COAXIAL1 COAXIAL2 XM LOOPEXTGND LOOPGND LOOPGND AM ANT FM ANT LOOP ANT GND (BD/DVD PLAYER) INOUT OUT OUT IN IN INININ INOUTSUBWOOFER SURROUNDFRONT IN IN IN IN INTV/STB VCRDVD RECORDER DVD RECORDER DVD RECORDERTV MONITOR TV MONITORTV/STB CENTERBD/ DVD PLAYER BD/ DVD PLAYER (DVD RECORDER) IN (R) (L) AUDIO OUT(R) (L) AUDIO OUT DVD player (BD player)DVD recorderRear panel ïCDð S VIDEOVIDEO L R CD DVD 6CH SUBWOOFERBD/DVD/ VCR TV/STB FRONTçA FRONTçB CENTER SURROUNDSURROUND BACK Y TV MONITOR OUT TV / STB INDVD RECORDER IN PBPRSPEAKERS COMPONENT VIDEO HAUT-PARLEURSYYPBPRPBPR AC IN RL RL R LRBI-WIRE LF HF AUD IO DIGITAL IN DIGITAL TRANSCEIVER (BD/ DVD PLAYER) (DVD RECODER)(TV/STB)OPTICAL1 OPTICAL2COAXIAL1 COAXIAL2 XM LOOPEXTGND LOOPGND LOOPGND AM ANT FM ANT LOOP ANT GND (BD/DVD PLAYER) INOUT OUT OUT IN IN IN IN IN INOUTSUBWOOFER SURROUNDFRONT IN IN IN IN INTV/STB VCRDVD RECORDER DVD RECORDER DVD RECORDERTV MONITOR TV MONITORTV/STB CENTERBD/ DVD PLAYER BD/ DVD PLAYER (DVD RECORDER) IN Rear panel DVD recorder or DVD player (BD player)(R) (L) FRONT CENTER SUBWOOFER • See page 27 for playback instructions. (R) (L) SURROUND
19 RQT8739 Make either digital audio (OPTICAL) output connections or analog audio output connections according to your equipment and preference. Make either digital audio (COAXIAL) output connections or analog audio output connections according to your equipment and preference. These terminals are convenient for equipment you want to connect only temporarily. To connect the unit to a cable box or satellite receiver etc. To connect the unit to a CD player To connect the unit to a video camera or game player etc. ïCDð S VIDEOVIDEO L R CD DVD 6CH SUBWOOFERBD/DVD/ VCR TV/STB FRONTçA FRONTçB CENTER SURROUNDSURROUND BACK Y TV MONITOR OUTTV / STB IN DVD RECORDER IN PBPRSPEAKERS COMPONENT VIDEO HAUT-PARLEURSYY PBPRPBPR AC IN RL RL R LRBI-WIRE LF HF AUD I O DIGITAL IN DIGITAL TRANSCEIVER (BD/ DVD PLAYER) (DVD RECODER)(TV/STB)OPTICAL1 OPTICAL2COAXIAL1 COAXIAL2 XM LOOPEXTGND LOOPGND LOOPGND AM ANT FM ANT LOOP ANT GND (BD/DVD PLAYER) INOUT OUT OUT IN IN IN IN IN INOUTSUBWOOFER SURROUNDFRONT ININ IN INININTV/STB VCRDVD RECORDER DVD RECORDER DVD RECORDERTV MONITOR TV MONITORTV/STB CENTERBD/ DVD PLAYER BD/ DVD PLAYER (DVD RECORDER) IN Y P B PR S VIDEO OUT VIDEO OUT COMPONENT VIDEO OUT AUDIO OUT (L) (R) DIGITAL AUDIO OUT (OPTICAL) • Use cables that belong to the same type as the video cable you used for connecting the unit to your TV. • See pages 14 to 16 for connecting the unit to the TV. Cable box or satellite receiver etc. Rear panel “Changing the digital input settings” (á page 37) S VIDEOVIDEO L R CD DVD 6CH SUBWOOFERBD/DVD/ VCR TV/STB FRONTçA FRONTçB CENTER SURROUNDSURROUND BACK Y TV MONITOR OUT TV / STB INDVD RECORDER IN PBPRSPEAKERS COMPONENT VIDEO HAUT-PARLEURSYYPBPRPBPR AC IN RL RL R LRBI-WIRE LF HF AUD I O DIGITAL IN DIGITAL TRANSCEIVER (BD/ DVD PLAYER) (DVD RECODER)(TV/STB)OPTICAL1 OPTICAL2COAXIAL1 COAXIAL2 XM LOOPEXTGND LOOPGND LOOPGND AM ANT FM ANT LOOP ANT GND (BD/DVD PLAYER) INOUT OUT OUT IN IN ININ IN INOUTSUBWOOFER SURROUNDFRONT IN IN IN IN INTV/STB VCRDVD RECORDER DVD RECORDER DVD RECORDERTV MONITOR TV MONITORTV/STB CENTERBD/ DVD PLAYER BD/ DVD PLAYER (DVD RECORDER) IN ïCDð DIGITAL AUDIO OUT (COAXIAL) AUDIO OUT (L) (R) CD player “Changing the digital input settings” (á page 37) Rear panel SPEAKERSW-MENU/-SETUPENTER INPUT SELECTOR VOLUME BI-AMP SURROUND SURROUND SPEAKERSAUTO DETECTOR -MULTI ROOM TUNE AUX ADVANCED DUAL AMP POWER WIRELESS READY AUTO SPEAKER SETUP SETUP MIC HDMI MULTI ROOM RETURN SURROUND SPEAKERSENTER-MENU/-SETUPAUTO DETECTOR -MULTI ROOMRETURNTUNESETUP MICW AUXS VIDEOVIDEOL-AUDIO-R Video camera etc.S VIDEO OUT VIDEO OUT • Use a cable that belongs to the same type as the video cable you used for connecting the unit to your TV. • See pages 14 to 16 for connecting the unit to the TV. AU DIO OUT (L) (R) Preparations Connections • Turn off all equipment before making any connections. • Peripheral equipment sold separately unless otherwise indicated. • To connect equipment, refer to the appropriate operating instructions.
20 RQT8739 Connections See pages 8 and 9 for placing and connecting your speakers according to their number. Bi-wire speakers have separate connection terminals for high frequency and low frequency signals. • Bi-wiring prevents high frequency and low frequency signals from interfering with each other. It offers playback in high audio quality. • HF and LF stand for high frequency and low frequency, respectively. • Make sure to select “YES ” in “Making bi-wire setting” (below) when you connect the unit to bi-wire speakers. The speakers do not produce adequate sounds unless you make this setting. • Make sure to connect speakers’ HF terminals with the unit’s FRONT B terminals, and speakers’ LF terminals with the unit’s FRONT A terminals. • Different amps for high frequency and low frequency signals produce BI-AMP stereo sounds that are clearer and higher in audio quality when you play on 2 channels sources containing analog audio and 2-channel PCM signals (á page 27). See “Making BI-AMP settings” (á page 36) for detailed settings. Connecting speakers To connect bi-wire speakers Making bi-wire setting 1 Press and hold [-MENU/–SETUP, RETURN] for about 2 seconds to enter the SETUP. 2 Select and confirm the choice. 3 Select and confirm the choice. YES : When bi-wire speakers are connected NO : When bi-wire speakers are not connected Factory setting: NO 4 Select and finish the setting. VIDEO 6CH SUBWOOFERVCR TV/STB FRONT FRONT CENTER SURROUNDSURROUND BACK Y TV MONITOR OUT TV / STB INDVD RECORDER IN PBPRSPEAKERS COMPONENT VIDEO HAUT-PARLEURSYYPBPRPBPR AC IN RL RLRLRBI-WIRE LFHF AUDIOIN IN INOUTFRONT IN IN IN INTV/STB VCRDVD RECORDER DVD RECORDER BD/ DVD PLAYER DER) INHFHF LF LFSpeaker cable Speaker impedance BI-WIRE: 6 to 8 Ω Rear panel Front speaker (L) Rear view Front speaker (R) Rear view Note SPEAKERS-MENU/-SETUPENTER INPUT SELECTOR BI-AMP SURROUND SURROUND SPEAKERSAUTO DETECTOR -MULTI ROOM TUNE ADVANCED DUAL AMP POWER WIRELESS READY MULTI ROOM RETURN SURROUND SPEAKERSENTER-MENU/-SETUPAUTO DETECTOR -MULTI ROOMRETURNTUNE INPUT SELECTOR INPUT SELECTOR ENTER-MENU/-SETUP RETURN -MENU/-SETUPENTER RETURN Turn to select.Press to confirm your choice. To return to the previous display/ To c a n c e l Basic operation Note