Panasonic Av Control Receiver Sa-xr70 Operating Instructions
Here you can view all the pages of manual Panasonic Av Control Receiver Sa-xr70 Operating Instructions. The Panasonic manuals for Stereo Receiver are available online for free. You can easily download all the documents as PDF.
Page 11
11 Step 3 RQT7523 Settings Change the settings to tailor your equipment to the environment in which you are using it. Before making any changes, read the following descriptions of the settings and refer to the instructions for the speakers and equipment. The settings remain intact until they are changed, even after the power is turned off. There are two ways to customize the receiver, and details of both are provided below. A. Using the On Screen Display (á page 12)B. Using the Multi control (á page 14)...
Page 12
![Page 12
12
Step 3
RQT7523
SettingsStep 3
• Make sure the television’s VIDEO IN terminal and this unit’s VIDEO TV MONITOR OUT terminal areconnected (á pages 4 and 8).
• Turn on the television and select the video input for this unit.
• Note the factory settings and ranges.
1A. Using the On Screen Display (Customizing your receiver)Speakers
L: Front left
C: Center
R: Front right
LS: Surround left
RS: Surround right
SB: Surround back
The factory setting is 6 [L-C-R-LS-
RS-SB].
Subwoofer
The factory setting is YES....](http://img.usermanuals.tech/thumb/58/62273/w300_sa-xr70_en_om_d-11.png "Page 12
12
Step 3
RQT7523
SettingsStep 3
• Make sure the television’s VIDEO IN terminal and this unit’s VIDEO TV MONITOR OUT terminal areconnected (á pages 4 and 8).
• Turn on the television and select the video input for this unit.
• Note the factory settings and ranges.
1A. Using the On Screen Display (Customizing your receiver)Speakers
L: Front left
C: Center
R: Front right
LS: Surround left
RS: Surround right
SB: Surround back
The factory setting is 6 [L-C-R-LS-
RS-SB].
Subwoofer
The factory setting is YES....")
12 Step 3 RQT7523 SettingsStep 3 • Make sure the television’s VIDEO IN terminal and this unit’s VIDEO TV MONITOR OUT terminal areconnected (á pages 4 and 8). • Turn on the television and select the video input for this unit. • Note the factory settings and ranges. 1A. Using the On Screen Display (Customizing your receiver)Speakers L: Front left C: Center R: Front right LS: Surround left RS: Surround right SB: Surround back The factory setting is 6 [L-C-R-LS- RS-SB]. Subwoofer The factory setting is YES....
Page 13
![Page 13
13
Step 3
RQT7523
1. Select the speakers.
6 [L-C-R-LS-RS-SB]: All speakers connected
5 [L---R-LS-RS-SB ]: No center speaker
5 [L-C-R-LS-RS ]: No surround back speaker
4 [L---R-LS-RS ]: No center and surround back speaker
3 [L-C-R ]: No surround speaker
2 [L---R ]: Only front speaker
1. Change the setting.
1. Select the input position. 2. Change the setting. 3. Select “Return”.
1. Select the input position. 2. Change the setting. 3. Select “Return”.
1. Select the speaker. 2. Change the setting. 3. Select...](http://img.usermanuals.tech/thumb/58/62273/w300_sa-xr70_en_om_d-12.png "Page 13
13
Step 3
RQT7523
1. Select the speakers.
6 [L-C-R-LS-RS-SB]: All speakers connected
5 [L---R-LS-RS-SB ]: No center speaker
5 [L-C-R-LS-RS ]: No surround back speaker
4 [L---R-LS-RS ]: No center and surround back speaker
3 [L-C-R ]: No surround speaker
2 [L---R ]: Only front speaker
1. Change the setting.
1. Select the input position. 2. Change the setting. 3. Select “Return”.
1. Select the input position. 2. Change the setting. 3. Select “Return”.
1. Select the speaker. 2. Change the setting. 3. Select...")
13 Step 3 RQT7523 1. Select the speakers. 6 [L-C-R-LS-RS-SB]: All speakers connected 5 [L---R-LS-RS-SB ]: No center speaker 5 [L-C-R-LS-RS ]: No surround back speaker 4 [L---R-LS-RS ]: No center and surround back speaker 3 [L-C-R ]: No surround speaker 2 [L---R ]: Only front speaker 1. Change the setting. 1. Select the input position. 2. Change the setting. 3. Select “Return”. 1. Select the input position. 2. Change the setting. 3. Select “Return”. 1. Select the speaker. 2. Change the setting. 3. Select...
Page 14
14 Step 3 RQT7523 Step 3Settings • For details on the Multi control menus and factory settings, refer to page 28. • Note the factory settings and ranges. 1B. Using the Multi control (Customizing your receiver) SPEAKERS SUBW: Subwoofer L: Front left C: Center R: Front right S: Surround SB: Surround back The factory settings are: SUBW YES LCR S SB D-INPUT (Digital input) The factory settings are: TV: OPT 1 DV R : O P T 2 DVD: COAX 1 CD: COAX 2 HDMI SEL (HDMI sel ect) The factory setting is DVD. IN MODE...
Page 15
15 Step 3 RQT7523 1. Select. 2. Change the setting. 1. Select the input position. 2. Change the setting. 1. Select “DVD” or “DVR”. 1. Select the input position. 2. Change the setting. 1. Select the speaker. 2. Change the setting. 1. Select the speaker. 2. Change the setting. 1. Change the setting. 1. Select “DISPLAY” or “VIDEO”. 2. Change the setting. INPUT SELECTOR SUBW YESYESNO INPUT SELECTOR LCR S SB INPUT SELECTOR TV TV, DVR, DVD, CD INPUT SELECTOR OPT 1 OPT 1, OPT 2, COAX 1, COAX 2 INPUT...
Page 16
16 Step 4 RQT7523 Sound modes Adding surround effects Using Dolby Pro Logic Ⅱx/Dolby Pro Logic Ⅱ Dolby Pro LogicⅡx wil l work on 2- channel, Dolby Digital 5.1 channel and Dolby Digital Surround EX sources.If 6.1CH DECODING is set to off, play is in Dolby Pro Logic Ⅱ when playing Dolby Pro Logic Ⅱx on a 2-channel source.The following modes are available when using Dolby Pro Logic Ⅱx or Dolby Pro LogicⅡ. MOVIE Use this mode when playing movies. When the input signal is Dolby Digital 5.1 channel or Dolby...
Page 17
17 Step 4 RQT7523 You can adjust the effect of MUSIC with the dimension, center width controls and PANORAMA. (Only when the input signal is 2-channel.) Dimension Control – DIMEN You can make up for differences in the output level of the front and surround speakers. You can choose a level between –3 and +3 - Increase the level to move sound to the front speakers, decrease to move it to the surround speakers. The default is level 0. Select “DIMEN”. Adjust the effect.Center Width Control – C-WDTH This...
Page 18
![Page 18
18
Operations
RQT7523
Control guide
• When you turn the dimmer to “ON” or turn HQ sound mode on, the following indicators will dim.
Main unit
Standby indicator [^] When the unit is connected to the
AC mains supply, this indicator
lights up in standby mode and
goes out when the unit is turned
on.
[POWER 8] Press to switch the unit from on to
standby mode or vice versa. In
standby mode, the unit is still
consuming a small amount of
power.
[SPEAKERS, A, B,
BI-WIRE]
For selecting speakers A or B.
To use...](http://img.usermanuals.tech/thumb/58/62273/w300_sa-xr70_en_om_d-17.png "Page 18
18
Operations
RQT7523
Control guide
• When you turn the dimmer to “ON” or turn HQ sound mode on, the following indicators will dim.
Main unit
Standby indicator [^] When the unit is connected to the
AC mains supply, this indicator
lights up in standby mode and
goes out when the unit is turned
on.
[POWER 8] Press to switch the unit from on to
standby mode or vice versa. In
standby mode, the unit is still
consuming a small amount of
power.
[SPEAKERS, A, B,
BI-WIRE]
For selecting speakers A or B.
To use...")
18 Operations RQT7523 Control guide • When you turn the dimmer to “ON” or turn HQ sound mode on, the following indicators will dim. Main unit Standby indicator [^] When the unit is connected to the AC mains supply, this indicator lights up in standby mode and goes out when the unit is turned on. [POWER 8] Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. [SPEAKERS, A, B, BI-WIRE] For selecting speakers A or B. To use...
Page 19
![Page 19
19
Operations
RQT7523
For your reference• When playing video sources connected to DVR/VCR1
The picture remains on the screen even if you select TAPE, CD or
TUNER.
• When SPEAKERS B is on
If SPEAKERS B is selected, play will be 2-channel only. For multi-
channel play, press [B] to turn off “B”. Then press [A] so that “A” only
comes on.
• When input is DIGITAL
The tape monitor cannot be used.
• When muting is on
Muting is canceled when the unit is turned off.• When DVD ANALOG 6CH input is on
Speaker...](http://img.usermanuals.tech/thumb/58/62273/w300_sa-xr70_en_om_d-18.png "Page 19
19
Operations
RQT7523
For your reference• When playing video sources connected to DVR/VCR1
The picture remains on the screen even if you select TAPE, CD or
TUNER.
• When SPEAKERS B is on
If SPEAKERS B is selected, play will be 2-channel only. For multi-
channel play, press [B] to turn off “B”. Then press [A] so that “A” only
comes on.
• When input is DIGITAL
The tape monitor cannot be used.
• When muting is on
Muting is canceled when the unit is turned off.• When DVD ANALOG 6CH input is on
Speaker...")
19 Operations RQT7523 For your reference• When playing video sources connected to DVR/VCR1 The picture remains on the screen even if you select TAPE, CD or TUNER. • When SPEAKERS B is on If SPEAKERS B is selected, play will be 2-channel only. For multi- channel play, press [B] to turn off “B”. Then press [A] so that “A” only comes on. • When input is DIGITAL The tape monitor cannot be used. • When muting is on Muting is canceled when the unit is turned off.• When DVD ANALOG 6CH input is on Speaker...
Page 20
![Page 20
20
Operations
RQT7523
The radio
Manual tuning
Select “TUNER FM” or “TUNER AM”.Direct tuning
e.g. 107.9 MHz, Press [1] → [0] → [7] → [9]
Tuning intervals: FM - 0.1 MHz, AM - 10 kHz
• If you do not press a button while the cursor is flashing, the display
returns to the frequency being received.
• If the frequency has not been input correctly, “ERROR” will be
displayed.
Select MANUAL tuning mode.(á below, “Select MANUAL or PRESET tuning mode”)
Tune to the station.
Tuning intervals: FM - 0.2 MHz, AM - 10...](http://img.usermanuals.tech/thumb/58/62273/w300_sa-xr70_en_om_d-19.png "Page 20
20
Operations
RQT7523
The radio
Manual tuning
Select “TUNER FM” or “TUNER AM”.Direct tuning
e.g. 107.9 MHz, Press [1] → [0] → [7] → [9]
Tuning intervals: FM - 0.1 MHz, AM - 10 kHz
• If you do not press a button while the cursor is flashing, the display
returns to the frequency being received.
• If the frequency has not been input correctly, “ERROR” will be
displayed.
Select MANUAL tuning mode.(á below, “Select MANUAL or PRESET tuning mode”)
Tune to the station.
Tuning intervals: FM - 0.2 MHz, AM - 10...")
20 Operations RQT7523 The radio Manual tuning Select “TUNER FM” or “TUNER AM”.Direct tuning e.g. 107.9 MHz, Press [1] → [0] → [7] → [9] Tuning intervals: FM - 0.1 MHz, AM - 10 kHz • If you do not press a button while the cursor is flashing, the display returns to the frequency being received. • If the frequency has not been input correctly, “ERROR” will be displayed. Select MANUAL tuning mode.(á below, “Select MANUAL or PRESET tuning mode”) Tune to the station. Tuning intervals: FM - 0.2 MHz, AM - 10...