Panasonic Av Control Receiver Sa-xr58 Operating Instructions

							
ENGLISH
RQTV0156

21
Using HDAVI Control
TM
Your DIGA switches on. Play starts if there is a disc in the tray. If a disc is not in the tray, DIGA plays the television program last recorded to the hard disk.Your VIERA switches on and input switches.This unit switches on, input switches to “DVR”, and multi-channel play starts.Press [+ VOLUME -] to adjust the volume.You can also adjust the volume with VIERA’s remote control.(An indicator appears on the television showing that you are adjusting this unit’s volume.)If the beginning of the program is cut off, press [u SKIP] to skip back to the beginning.
1.
2.3.
(TV/STB)OPTICAL1
DIGITAL IN
(DVD RECORDER)(DVD PLAYER)(CD)OPTICAL2 COAXIAL1COAXIAL2
OUT (DVD RECORDER) INS VIDEO
OUTTV MONITORINDVD PLAYERINDVD RECORDERINTV/STBOUTTV MONITOR D VD PLAYERIN
LOOPEXTLOOPEXTLOOPEXT
AM ANTFM ANT
LOOP ANTGND
Using HDAVI ControlTM
HDAVI ControlThis convenient feature links control of your receiver and your other Panasonic home theater equipment. VIERA televisions and DIGA DVD recorders connected with an HDMI cable can be controlled in this way. For details, refer to the operating instructions of your other equipment.
1. Connect your other Panasonic home theater equipment (HDAVI Control compatible VIERA television or DIGA DVD recorder) with an HDMI cable (➡ page 5). (Cables that do not meet the HDMI specifications are not compatible with this feature. Use a Panasonic HDMI cable for best results.)2. Read your television’s operating instructions and make the settings necessary to activate the HDAVI Control.3. Switch on all your equipment, then switch your television off then on again and check that images from DIGA appear correctly. (Do this whenever you change connections or settings.)
TV (VIERA)
Preparation
Rear panel
DVD recorder (DIGA)
TV HDMI (AV IN)
DIGITAL AUDIOOUT (OPTICAL)
DVD HDMI (AV OUT)
One-touch Home Theater
Point the remote control at your DIGA DVD recorder and press [ONE 
TOUCH PLAY].
If you switch your VIERA off, this unit also switches off (unless you have changed the input source to “TUNER” or “CD”).VIERA’s speakers start to output the audio instead if you switch this unit off. If you then switch this unit on again, audio output switches back to this unit.If this unit is off and you switch the setting on your VIERA so that audio is output from a connected receiver, this unit switches on and starts to output the audio.
•
•
•
Multi-channel audio for your VIERAConnect your VIERA’s digital output terminal to the DIGITAL IN OPTICAL 1 terminal on this unit (➡ page 9).Refer to your VIERA’s operating instructions and make the settings necessary to switch audio output from VIERA’s speakers to speakers connected to this unit.The input source on this unit switches to “TV” if you select a channel or otherwise operate the television (➡ page 34).
••
•
ONETOUCHPLAY
�DIRECTNAVIGATOR
TOPMENU�FUNCTIONS
0
RECEIVERAVSYSTEMTVRECORDERDVD
DV
DPLAYER
ANALOG 6CHVCRCDTUNER
BAND
CH
VOLUME
DIRECT TUNING
SKIPSLOW/SEARCH
STOPPA USEPLAY
DRIVE SELECTDVD RECORDERMANU AL SKIP
ENTER
SUB MENU RETURN
OFFSUBWOOFERTV
LEVELEFFECTVOL
NEO : 6
SFCMUSIC MOVIEMUTING
TV/AV
DISC
-/--
TEST
DIMMER
AUTO
ONETOUCHPLAY
For your  reference
To turn off HDAVI Control, “HDMI settings”, ➡ page 29.
To take advantage of the multi-channel sounds now available with digital television, use a digital connection if your TV has a digital output terminal.•

SA-XR58.indb   216/27/2006   6:55:11 PM 
						

							
ENGLISH
RQTV0156

22
Surround sound
There are various modes you can use to add surround effects or play stereo through more than just the normal two speakers.
Note
Dolby Pro LogicΙΙx
This feature adds surround effects to stereo sources.It can also expand 5.1-channel Dolby Digital and DTS so that you can hear them through 7.1 channels (when you have connected 2 surround back speakers) or 6.1 channels (when you have connected 1 surround back speaker).Use this mode when playing Dolby Digital Surround EX to make effective use of the surround back channel.
••
•
Press  to select one of the following modes.
   (Movie)
Use this mode when playing movie software, especially if it is recorded in Dolby Surround.If you have connected two surround back speakers, their output will be in stereo.This is the factory setting.
(Music)
This mode is effective on music sources.
(Dolby Digital EX)
Use this mode when playing movie software, especially if it is recorded in Dolby Digital EX format.It is effective on multi-channel sources.If you have connected two surround back speakers, output from them will be monaural.If you have connected one surround back speaker, the “PLΙΙx” indicator goes out and either “DIGITAL EX” or “EX” lights instead.•
(Game)
Enjoy gaming with more impact.This mode is effective on stereo sources.You cannot use this mode unless you have connected both surround speakers and surround back speakers (➡ pages 13 and 14 to 17). Make sure you have also set these speakers as present in “Speaker and size settings” (➡ page 27).
To cancel, press OFF
Adjusting the Dolby Pro LogicΙΙx “MUSIC” mode
You can make the following adjustments in stereo sources.
   (Dimension Control)
You can make up for differences in the output level of the front and surround speakers.
 
Press  to select “DIMEN”, then press  to 
adjust the level.Adjustment range: -3 (emphasis on the surround speakers) to +3 (emphasis on the front speakers)Factory setting: 0
(Center Width Control)
This is an overall adjustment for the front and center speakers to achieve a more natural sound.
 
Press  to select “C-WIDTH”, then press  to 
adjust the level.Adjustment range: 0 (for a distinct center) to 7 (for a broad center)Factory setting: 3
(Panorama)
This mode spreads sound out to envelope you in music. 
Press  to select “PANORAMA”, then press 
to select “ON” or “OFF”.Factory setting: OFF
EFFECT
EFFECT
ONETOUCHPLAY
�DIRECTNAVIGATOR
TOPMENU�FUNCTIONS
0
RECEIVERAVSYSTEM
TVRECORDERDVD
DV
DPLA YER
ANALOG 6CHVCRCDTUNER
BAND
CH
VOLUME
DIRECT TUNING
SKIPSLO W/SEARCH
STOPPAUSEPLAY
DRIVE SELECTDVD RECORDERMANU AL SKIP
ENTER
SUB MENURETURN
OFFSUBW OOFERTV
LEVELEFFECTVOL
NEO : 6
SFCMUSIC MOVIEMUTING
TV/AV
DISC
-/--
TEST
DIMMER
AUTO
ONETOUCHPLAY
�DIRECTNAVIGATOR
TOPMENU�FUNCTIONS
0
RECEIVERAVSYSTEM
TVRECORDERDVD
DV
DPLA YER
ANALOG 6CHVCRCDTUNER
BAND
CH
VOLUME
DIRECT TUNING
SKIPSLO W/SEARCH
STOPPAUSEPLAY
DRIVE SELECTDVD RECORDERMANU AL SKIP
ENTER
SUB MENURETURN
OFFSUBW OOFERTV
LEVELEFFECTVOL
NEO : 6
SFCMUSIC MOVIEMUTING
TV/AV
DISC
-/--
TEST
DIMMER
AUTO
You may be unable to use some of these surround effects with some sources.These settings are saved even if you turn the unit off.
•
•
EFFECT
Surround sound

SA-XR58.indb   226/27/2006   6:55:14 PM 
						

							
ENGLISH
RQTV0156

23
Dolby Pro LogicΙΙx
This feature adds surround effects to stereo sources.It can also expand 5.1-channel Dolby Digital and DTS so that you can hear them through 7.1 channels (when you have connected 2 surround back speakers) or 6.1 channels (when you have connected 1 surround back speaker).Use this mode when playing Dolby Digital Surround EX to make effective use of the surround back channel.
••
•
Press  to select one of the following modes.
   (Movie)
Use this mode when playing movie software, especially if it is recorded in Dolby Surround.If you have connected two surround back speakers, their output will be in stereo.This is the factory setting.
(Music)
This mode is effective on music sources.
(Dolby Digital EX)
Use this mode when playing movie software, especially if it is recorded in Dolby Digital EX format.It is effective on multi-channel sources.If you have connected two surround back speakers, output from them will be monaural.If you have connected one surround back speaker, the “PLΙΙx” indicator goes out and either “DIGITAL EX” or “EX” lights instead.•
(Game)
Enjoy gaming with more impact.This mode is effective on stereo sources.You cannot use this mode unless you have connected both surround speakers and surround back speakers (➡ pages 13 and 14 to 17). Make sure you have also set these speakers as present in “Speaker and size settings” (➡ page 27).
To cancel, press 
NEO:6
This feature adds surround effects to stereo sources.It can also expand 5.1-channel Dolby Digital and DTS so that you can hear them through 6.1 channels. 
••
Press  to select one of the following modes.
  (Cinema)
Use this mode when playing movies.
(Music)
This mode is effective on music sources.
For 2-channel Dolby Digital and DTS sources with matrix-encoded multi-channel audio, use “CINEMA”. For simple stereo sources, use “MUSIC”.
To cancel, press 
ONETOUCHPLAY
�DIRECTNAVIGATOR
TOPMENU�FUNCTIONS
0
RECEIVERAVSYSTEM
TVRECORDERDVD
DV
DPLA YER
ANALOG 6CHVCRCDTUNER
BAND
CH
VOLUME
DIRECT TUNING
SKIPSLO W/SEARCH
STOPPAUSEPLAY
DRIVE SELECTDVD RECORDERMANU AL SKIP
ENTER
SUB MENURETURN
OFFSUBW OOFERTV
LEVELEFFECTVOL
NEO : 6
SFCMUSIC MOVIEMUTING
TV/AV
DISC
-/--
TEST
DIMMER
AUTO
NEO : 6
OFF
Adjusting the NEO:6 “MUSIC” mode
  (Center Image Control)
This is an overall adjustment for the front and center speakers to achieve a more natural sound. 
Press to select “C-IMAGE”, then press  to 
adjust the level.Adjustment range: 0 (for a distinct center) to 5 (for a broad center)Factory setting: 2
EFFECT
Note
There will be no output from the subwoofer when using NEO:6 on stereo sources and you have set all of your 
speakers to “LARGE” in “Speaker and size settings” (➡ page 27).You may be unable to use some of these surround effects with some sources.These settings are saved even if you turn the unit off.
•
•
•
Surround sound

SA-XR58.indb   236/27/2006   6:55:15 PM 
						

							
ENGLISH
RQTV0156

Surround sound
There are various modes you can use to add surround effects or play stereo through more than just the normal two speakers.
ONETOUCHPLAY
DIRECTNAVIGATOR
TOPMENUFUNCTIONS
0
RECEIVERAV
SYSTEM
TVRECORDERDVD
DV
DPLA YER
ANALOG 6CHVCR
CDTUNER
BAND
CH
VOLUME
DIRECT  TUNING
SKIPSLOW/SEARCH
STOPPAUSEPLAY
DRIVE SELECTDVD RECORDERMANU AL SKIP
ENTER
SUB MENU RETURN
OFFSUBWOOFER
TEST
TV
LEVELEFFECTVOL
NEO : 6
SFCMUSIC MOVIE
DIMMER
MUTING
TV/AV
DISC
-/--
AUTO
SFC (Sound Field Control)
Use SFC modes to add realism and depth to Dolby Digital, DTS, PCM, and analogue stereo sources.
(Music)This mode is effective on music sources.
Press  to select one of the following modes
or
You can also press  to select the modes after you have pressed 
  (Live)
Adds reverberation and depth that makes you feel like you were in a concert hall.
(Pop/rock)
Suitable for pop and rock.
(Vocal)
For adding gloss to vocals.
(Jazz)
Adds the reverberations you would experience in an intimate jazz club.
(Dance)
Adds the echoes and feeling of space you would experience in a dance hall.
(Party)
This mode uses all available speakers so that sound is in stereo regardless of the direction you are facing, and is useful at parties where listeners are spread out.
To cancel, press 
  (Movie)Use this mode when playing movies.
Press  to select one of the following modes
or
You can also press  to select the modes after you have pressed 
(Drama)
For dramas and other material where dialogue is important.
(Action)
For action movies and other material where impact is important.
(Sports)
To make you feel like you were in the stadium.
(Musical)
Makes you feel like you are in a theater.
(Game)
Enjoy gaming with more impact.
To cancel, press 
SFC
MUSIC
SFC
MUSIC
OFF
SFC
MOVIE
SFC
MOVIE
OFF
24
Surround sound

SA-XR58.indb   246/27/2006   6:55:17 PM 
						

							
ENGLISH
RQTV0156

SFC (Sound Field Control)
Use SFC modes to add realism and depth to Dolby Digital, DTS, PCM, and analogue stereo sources.
(Music)This mode is effective on music sources.
Press  to select one of the following modes
or
You can also press  to select the modes after you have pressed 
  (Live)
Adds reverberation and depth that makes you feel like you were in a concert hall.
(Pop/rock)
Suitable for pop and rock.
(Vocal)
For adding gloss to vocals.
(Jazz)
Adds the reverberations you would experience in an intimate jazz club.
(Dance)
Adds the echoes and feeling of space you would experience in a dance hall.
(Party)
This mode uses all available speakers so that sound is in stereo regardless of the direction you are facing, and is useful at parties where listeners are spread out.
To cancel, press 
  (Movie)Use this mode when playing movies.
Press  to select one of the following modes
or
You can also press  to select the modes after you have pressed 
(Drama)
For dramas and other material where dialogue is important.
(Action)
For action movies and other material where impact is important.
(Sports)
To make you feel like you were in the stadium.
(Musical)
Makes you feel like you are in a theater.
(Game)
Enjoy gaming with more impact.
To cancel, press 
In “PARTY” mode, you can only adjust the subwoofer output level (➡ page 17).You can only adjust speakers if you have connected them (➡ pages 13, and 14 to 17) and set them as present (“Speaker and size settings”, ➡ page 27).You may be unable to use some of these surround effects with some sources.These settings are saved even if you turn the unit off.You cannot use SFC modes unless you have connected center or surround speakers.When in “PARTY” mode and you have connected a single surround back speaker (the left surround back speaker), there will be no sound from that speaker unless you have also connected a center speaker. Similarly, there will be no sound from your center speaker unless you have also connected a surround back speaker (the left surround back speaker).There may be some distortion with some input sources and modes. Reduce the effect level (➡ above), or choose another mode.
••
••••
•
Note
Adjusting SFC (Sound Field Control)
Adjusting the output level
Press  to select the speaker you want to adjust, then press  to adjust the level. 
C (center), RS (surround right), SBR (surround back right), SBL (surround back left), (SB when you have connected only one surround back speaker), LS (surround left)Adjustment range: -20 dB to +10 dBFactory setting: 0 dB 
SUBW (Subwoofer)Adjustment range: --- (off), MIN (minimum), 1 to 29, MAX (maximum)Factory setting: 20
Adjusting the effect level
Press , then press  to adjust the level.Adjustment range: EFFECT 1 (minimum) to EFFECT 10 (maximum)Factory setting: EFFECT 5You cannot adjust the effect level in the “PARTY” mode (➡ page 24).
LEVEL
EFFECT
25
Surround sound

SA-XR58.indb   256/27/2006   6:55:18 PM 
						

							
ENGLISH
RQTV0156

26
Receiver settings
Basic operations
1
2
3
4
Enter the setup menu. 
Press and hold  for about 2 seconds.
Select the item you want to change. 
 
Turn  to select the item.
Change the setting. 
 
Turn  to change the setting. 
 
 
Press to confirm.
Repeat  and  for other sub-item settings.
Exit the menu. 
Press  repeatedly until “EXIT” appears. 
 
Press to confirm. 
The previous display reappears.You can also turn [INPUT SELECTOR] to select “EXIT”.••
To return to the previous display/To cancel 
Press  to confirm.
Turn to select a sub-item. 
 
 
 
Press to confirm.
Press 
MENUSETUP
RETURN
INPUT SELECTOR
ENTER
2a
INPUT SELECTOR
INPUT SELECTOR
ENTER
MENUSETUP
RETURN
ENTER
ENTER
MENUSETUP
RETURN
AUTO SPEAKER SETUPADVANCEDDU AL AMPBI-AMP
SPEAKERSA BAUTO DETECTORSURR OUND
AUXSETUP MIC
MENUSETUPRETURN
INPUT SELECTORENTERVOLUMEHDMI
TUNE
S VIDEO INVIDEO INLAUDIO
 INR
MENU
SETUP
RETURN INPUT SELECT
OR
ENTER
Receiver settings
2b
Refer to pages 27, 28, and 29 for each item settings.For “REMOTE 1”, refer to page 37 to change the remote control code.
•
•
32b

SA-XR58.indb   266/27/2006   6:55:19 PM 
						

							
ENGLISH
RQTV0156

Select and confirm.
Select and confirm.
Select and confirm.
Reset
27
Only necessary if you have set speaker size to “SMALL”  (➡ above).
Small speakers are unable to reproduce the bass range adequately, so set the filter to match the range of your speakers 
so that more bass is output from the 
subwoofer.Only change this setting if auto speaker setup has not produced a satisfactory result.
•
•
•
Select and confirm.
Select the cut-off frequency and confirm.
The filter applies to any speakers you have set as “SMALL”.
Change this setting if you have bi-wired your front speakers  (➡ page 13).
Select and confirm.
Select and confirm.Factory setting: NO
Enter the distance of the speakers from the seating position so that the sound from all the speakers (except for the subwoofer) reaches you at the same time.
Select and confirm.
Select the speaker you  
want to set and confirm.
Select the distance  
and confirm.
L, R: Front speakersC: Center speaker
LS, RS: Surround speakersSBL, SBR: Surround back speakers
Adjustment range: 0.5 m to 15.0 m
Factory settings:
L, R (Front), C (Center)3.0 m
LS, RS (Surround), SBL, SBR (Surround back)1.5 m
Select and confirm. 
 
Select the speaker you want to  
set and confirm. 
 
Change the setting and confirm.
Set the speakers and their sizes.Different speakers play different ranges. Change the size setting to achieve a satisfactory bass.Only change this setting if auto speaker setup has not produced a satisfactory result.
•
•
•
When you have set the front speakers (LR) as “LARGE”The subwoofer outputs bass even when you are playing analogue or PCM stereo sources.The sound recorded for the LFE (low frequency effect) channel is played through the subwoofer.
•
•
SUBW:Subwoofer
LR: Front speakers 
C: Center speaker
S: Surround speakers
SB:Surround back speakers
SUBW (Subwoofer)
NO: Unconnected YES : Connected (factory setting) 
LR (Front), C (Center), S (Surround)
NONE: Speakers not connected (center or surround) 
SMALL : Speakers that cannot adequately reproduce the bass range (sufficient for most speakers when using a subwoofer) (factory setting).
LARGE: Speakers that can reproduce a full sound range, down to 20 Hz.
SB (Surround back)
NONE: Not connected
1-SPK: 1 connected
2-SPK : 2 connected (factory setting)
RETURN (Returns to the main menu)
The “SMALL” setting allows you to set the low pass filter to suit the frequency range of your speakers. (➡ below)The following settings are automatic:“SUBW” (subwoofer) is set to “YES” if you set “LR” (front) to “SMALL”. “LR”  is set to “LARGE” if you set “SUBW” to “NO”.“SB” (surround back) have the same size setting as “S” (surround).
•
•
•
2a
3
2a
m
3
m
3
3
Speaker and size 
settings
Distance 
LR BI-WIRE setting 
Low-pass filter
Factory setting: 100
Reset the settings done in auto speaker setup.Choose whether to check speaker polarity during auto speaker setup. (If polarity is reversed, a minus sign (-) appears besides the distance reading, for example, “L 3.0 -”  to show that polarity has been corrected.)
•
•
Auto Setup
3
Select and confirm.
Select and confirm.
Select and confirm.3
Receiver settings
Factory setting:  NO
Factory setting: CHECK YES
The settings are 80 Hz, 100 Hz, 120 Hz, 140 Hz, 160 Hz, 180 Hz, and 200 Hz.
YES: You have bi-wired your front speakersNO: You have not bi-wired your front speakers
2b
2b
2a
2a
2a
2b
Polarity
2a
2b
For your reference
For your reference
YES: Reset all auto speaker setup settingsNO: To cancel
CHECK NO: Do not check polarityCHECK YES: To check polarity
Note
“OVER” appears if a speaker was detected as being more than 15.0 m away during auto speaker setup.

SA-XR58.indb   276/27/2006   6:55:22 PM 
						

							
ENGLISH
RQTV0156

28
Receiver settings
➡ page 26 for basic operations
Change these settings to suit the connections you have made to the digital input terminals  (➡ pages 6, 7, 9, and 10).You cannot allocate more than one terminal per input. Therefore, if you change the setting for “DVD” to “OPT 1”, digital input for DVD input will be only through the OPTICAL 1 terminal.
•
•
Select and confirm. 
 
Select the equipment and confirm. 
 
Change the digital input setting and confirm. 
 
Repeat  and  to change other settings.
TV: Television
DVR: DVD recorder
DVD: DVD player
CD: CD player
Factory setting:
TV: OPT1 (OPTICAL 1)
DVR: OPT2 (OPTICAL 2)
DVD: COAX1 (COAXIAL 1)
CD: COAX2 (COAXIAL 2)
This unit automatically detects whether input is digital or analogue, but you can fix the input mode.Select “AUTO” if it isn’t necessary to fix a certain signal.
•
•
Select and confirm. 
 
Select the equipment and confirm. 
 
Select the setting and confirm. 
 
Repeat  and  to change other settings.
PCM FIX modeIn rare cases, the unit may have trouble recognizing the digital signals on discs. Use this mode if the beginnings of tracks are cut off when playing CDs.Do not use this mode if the unit can handle audio from CDs normally.When PCM FIX mode is on, the unit cannot process other signals. Choose another mode if PCM FIX causes noise.
•
•
•
TV: Television
DVR: DVD recorder
DVD: DVD player
CD: CD player
AUTO: The unit automatically detects whether input is 
digital or analogue. (HDMI 
takes priority when input is digital.)
ANALOG: Analogue input fixed
DIG: Digital input fixed
PCMFIX: PCM (from CDs) digital input fixed
Factory setting:
TV, DVR, DVD, CD: AUTO
“DIGITAL INPUT” lights after fixing digital input.“PCM” lights if you select the PCM FIX mode.“PCM FIX” flashes on the display if you input any signal other than PCM after you have set the PCM FIX mode.
•
•
•
This option appears after you have set “LR BI-WIRE setting” to “YES” (➡ page 27).Adjust high frequency (HF) and low frequency (LF) balance.Correct HF and LF delay time.
•
•
•
Balance
Select  and confirm. 
 
Select  and confirm. 
 
Adjust and confirm. 
 
Use the bar as a guide.
LF: low frequencyHF: high frequency
Delay time
Select and confirm. 
 
Select and confirm. 
 
Adjust and confirm.
Adjustment range: 0 to 30 cmAdjust in 1-cm increments.Factory setting: 0 cm
Digital input settings
Input signal
Bi-amp settings
cm
AUTO SPEAKER SETUPADVANCEDDU AL AMPBI-AMP
SPEAKERSA BAUTO DETECTORSURR OUND
AUXSETUP MIC
MENUSETUPRETURN
INPUT SELECTORENTERVOLUMEHDMI
TUNE
S VIDEO INVIDEO INLAUDIO
 INR
MENU
SETUP
RETURN INPUT SELECT
OR
ENTER
3
3
3
2a
22
2a
3
Speaker(cross section of a speaker)Difference
Receiver settings
3
3
For your reference
2a
2b
2a
2b
2b
2b

SA-XR58.indb   286/27/2006   6:55:24 PM 
						

							
ENGLISH
RQTV0156

29
➡ page 26 for basic operations
Set the dynamic range (the difference between the loudest and softest sounds) compression for Dolby Digital. Use this function when you have to turn the volume down, such as late at night. It compresses the dynamic range so that you can still hear dialogue and leave the sound field unaffected.
Select and confirm. 
 
Select a level and confirm.
This function depends on the disc so it may not work at times.
OFF: Off
STANDARD: The level recommended by the producer of the software for household viewing.
MAX: The maximum allowable compression (recommended for night viewing)
       Analogue input can cause distortion and the “OVERFLOW” warning to appear on the display. Turn the attenuator on if this occurs.
Select and confirm. 
 
Select and confirm.
OFF: Off
ON:On
Factory setting: OFF
Delay audio if there appears to be a difference in timing between audio and pictures.
Select and confirm.
Select and confirm.
OFF: No delay
ON:Audio delayed
Factory setting: OFF
Do the necessary settings again after this.
Select and confirm. 
 
Select and confirm.
Select “NO” to cancel.
Input switches to TUNER after you select “YES”. (Preset channels remain intact.)
YES: Reset all settings to those made in the factory
NO:Cancel
Specify the DVD equipment you have connected to the HDMI terminal.To reduce standby power consumption.Choice for turning off the HDAVI Control (➡ page 21). 
•
•
•
Select and confirm. 
 
Select and confirm. 
 
Select the equipment  
and confirm.
DVR: You have connected a DVD recorder (factory setting)
DVD: You have connected a DVD player
Standby selection
Select and confirm. 
 
Select and confirm. 
 
Select and confirm.
OFF: Standby power consumption reduced (approximately 0.35 W).Signals from DVD equipment cannot pass through HDMI connection to the television when the unit is in standby (➡ page 5).HDAVI Control (➡ page 21) does not work when the unit is in standby.
•
•
ON:Normal standby power consumption (factory setting)
Select and confirm. 
 
Select and confirm.
OFF: The Advance Dual Amp is off
AUTO:The Advanced Dual Amp works when possible
Factory setting: AUTO
Select “OFF” to cancel.
HDMI settings
Turning the 
ADVANCED DUAL 
AMP off
Clear audio at low 
volume
Attenuating analogue 
input
Delaying audio
Resetting factory 
settings
33
3
2
3
2
3
2
3
2
3
2
Note
Note
Receiver settings
Factory setting: OFF
Selecting InputHDAVI Control
Select and 
confirm.
Select and 
confirm.
Select and 
confirm.
3
3
OFF:HDAVI Control is OFF
ON:HDAVI Control is ON (factory setting)
2a
2b
2a
2b
2a
2b
Factory setting: YES

SA-XR58.indb   296/27/2006   6:55:26 PM 
						

							
ENGLISH
RQTV0156

30
AUTO SPEAKER SETUPADVANCEDDU AL AMPBI-AMP
SPEAKERSA BAUTO DETECTORSURR OUND
AUXSETUP MIC
MENUSETUPRETURN
INPUT SELECTORENTERVOLUMEHDMI
TUNE
S VIDEO INVIDEO INLAUDIO
 INR
MENU
SETUP
RETURN INPUT SELECT
OR
ENTER
Sound effects/Other functions
Basic operations
1
2
3
4
Enter the menu. 
Press 
Select the item you want to change. 
 
Turn  to select the item.
Change the setting. 
 
Turn  to change the setting. 
 
 
Press to confirm.
Exit the menu. 
Press  repeatedly until “EXIT” appears. 
 
Press to confirm. 
The previous display reappears.You can also turn [INPUT SELECTOR] to select “EXIT”.••
To return to the previous display/To cancel 
Press  to confirm.
Press 
MENUSETUP
RETURN
INPUT SELECTOR
ENTER
INPUT SELECTOR
ENTER
MENUSETUP
RETURN
ENTER
MENUSETUP
RETURN
ONETOUCHPLAY
�DIRECTNAVIGATOR
TOPMENU�FUNCTIONS
0
RECEIVERAVSYSTEMTVRECORDERDVD
DV
DPLAYER
ANALOG 6CHVCRCDTUNER
BAND
CH
VOLUME
DIRECT TUNING
SKIPSLO W/SEARCH
STOPPAUSEPLAY
DRIVE SELECTDVD RECORDERMANU AL SKIP
ENTER
SUB MENU RETURN
OFFSUBWOOFERTV
LEVELEFFECTVOL
NEO : 6
SFCMUSICMOVIEMUTING
TV/AV
DISC
-/--
TEST
DIMMER
AUTO
Sound effects/Other functions

SA-XR58.indb   306/27/2006   6:55:28 PM