Panasonic Av Control Receiver Sa-xr50 Operating Instructions
Here you can view all the pages of manual Panasonic Av Control Receiver Sa-xr50 Operating Instructions. The Panasonic manuals for Stereo Receiver are available online for free. You can easily download all the documents as PDF.
Page 11
![Page 11
11
Step 3
RQT7487
Adjusting speaker output level
Adjust the level of the other speakers based on the output of the front
speakers. (Output is only from the speakers selected in the SPEAKERS
settings. Adjust the volume of the front speakers with [VOLUME].)
2. Select. 3. Select the speakers.
C (center), RS (right surround), SB (surround back) and LS (left
surround) can be adjusted between –10 dB and +10 dB, with 0 being the
level of the front speakers.
Adjust center, surround and surround back output to...](http://img.usermanuals.tech/thumb/58/62368/w300_sa-xr50_en_om_d-10.png "Page 11
11
Step 3
RQT7487
Adjusting speaker output level
Adjust the level of the other speakers based on the output of the front
speakers. (Output is only from the speakers selected in the SPEAKERS
settings. Adjust the volume of the front speakers with [VOLUME].)
2. Select. 3. Select the speakers.
C (center), RS (right surround), SB (surround back) and LS (left
surround) can be adjusted between –10 dB and +10 dB, with 0 being the
level of the front speakers.
Adjust center, surround and surround back output to...")
11 Step 3 RQT7487 Adjusting speaker output level Adjust the level of the other speakers based on the output of the front speakers. (Output is only from the speakers selected in the SPEAKERS settings. Adjust the volume of the front speakers with [VOLUME].) 2. Select. 3. Select the speakers. C (center), RS (right surround), SB (surround back) and LS (left surround) can be adjusted between –10 dB and +10 dB, with 0 being the level of the front speakers. Adjust center, surround and surround back output to...
Page 12
12 Step 4 RQT7487 Basic operations Switch on.Sound modes Adding surround effects Using Dolby Pro Logic Ⅱ Dolby Pro LogicⅡprocessor works not only on sources recorded with Dolby Surround, but also on any stereo source. The following modes are available when using Dolby Pro Logic Ⅱ. Turn SPEAKERS A on. MOVIE Use this mode when playing movies, especially videotapes, recorded in Dolby Surround.MUSIC Adds surround effects to stereo sources.PANORAMASound is spread out more so you feel like you are surrounded...
Page 13
13 Step 4 RQT7487 You can adjust the effect of MUSIC and PANORAMA with the center width and dimension controls. Center Width Control – C-WDTH This adjustment helps you realize a more natural sound image when listening to music. Move sound out into the front speakers to improve the overall front image, or add sound to the center speaker to fix the center image. You can choose a level between 0 (the center speaker is dominant) and 7 (center sound is spread out). The default level is 3. Select “C-WDTH”....
Page 14
![Page 14
14
Operations
RQT7487
Control guide
• When you turn the dimmer to “ON”, the following indicators change to dim.
Main unit
Standby indicator [^] When the unit is connected to the
AC mains supply, this indicator
lights up in standby mode and
goes out when the unit is turned
on.
[POWER 8] Press to switch the unit from on to
standby mode or vice versa. In
standby mode, the unit is still
consuming a small amount of
power.
[SPEAKERS, A, B] For selecting speakers A
or B.
Turning the speakers off
automatically...](http://img.usermanuals.tech/thumb/58/62368/w300_sa-xr50_en_om_d-13.png "Page 14
14
Operations
RQT7487
Control guide
• When you turn the dimmer to “ON”, the following indicators change to dim.
Main unit
Standby indicator [^] When the unit is connected to the
AC mains supply, this indicator
lights up in standby mode and
goes out when the unit is turned
on.
[POWER 8] Press to switch the unit from on to
standby mode or vice versa. In
standby mode, the unit is still
consuming a small amount of
power.
[SPEAKERS, A, B] For selecting speakers A
or B.
Turning the speakers off
automatically...")
14 Operations RQT7487 Control guide • When you turn the dimmer to “ON”, the following indicators change to dim. Main unit Standby indicator [^] When the unit is connected to the AC mains supply, this indicator lights up in standby mode and goes out when the unit is turned on. [POWER 8] Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. [SPEAKERS, A, B] For selecting speakers A or B. Turning the speakers off automatically...
Page 15
15 Operations RQT7487 Buttons not explained on this page are used only to operate other equipment. Refer to the separate booklet, “Remote Control Operation Guide”, for remote control operation details. For your reference• When playing video sources connected to DVR/VCR1 The picture remains on the screen even if you select TAPE, CD or TUNER. • When SPEAKERS B is on The STEREO/2CH MIX mode is engaged automatically.• When DVD ANALOG 6CH input is on Speaker settings are ineffective. Change the settings on...
Page 16
![Page 16
16
Operations
RQT7487
The radio
Manual tuning
Select “TUNER FM” or “TUNER AM”.Direct tuning
e.g. 107.9 MHz, Press [1] → [0] → [7] → [9]
Tuning intervals: FM - 0.1 MHz, AM - 10 kHz
• If you do not press a button while the cursor is flashing, the display
returns to the frequency being received.
• If the frequency has not been input correctly, “ERROR” will be
displayed.
Select MANUAL tuning mode.(á below, “Select MANUAL or PRESET tuning mode”)
Tune to the station.
Tuning intervals: FM - 0.2 MHz, AM - 10...](http://img.usermanuals.tech/thumb/58/62368/w300_sa-xr50_en_om_d-15.png "Page 16
16
Operations
RQT7487
The radio
Manual tuning
Select “TUNER FM” or “TUNER AM”.Direct tuning
e.g. 107.9 MHz, Press [1] → [0] → [7] → [9]
Tuning intervals: FM - 0.1 MHz, AM - 10 kHz
• If you do not press a button while the cursor is flashing, the display
returns to the frequency being received.
• If the frequency has not been input correctly, “ERROR” will be
displayed.
Select MANUAL tuning mode.(á below, “Select MANUAL or PRESET tuning mode”)
Tune to the station.
Tuning intervals: FM - 0.2 MHz, AM - 10...")
16 Operations RQT7487 The radio Manual tuning Select “TUNER FM” or “TUNER AM”.Direct tuning e.g. 107.9 MHz, Press [1] → [0] → [7] → [9] Tuning intervals: FM - 0.1 MHz, AM - 10 kHz • If you do not press a button while the cursor is flashing, the display returns to the frequency being received. • If the frequency has not been input correctly, “ERROR” will be displayed. Select MANUAL tuning mode.(á below, “Select MANUAL or PRESET tuning mode”) Tune to the station. Tuning intervals: FM - 0.2 MHz, AM - 10...
Page 17
![Page 17
17
Operations
RQT7487
Preset tuning
Presetting stations.(á below, “Automatic presetting” or “Manual presetting”)Selecting preset channels
When using the numbered buttonsTo select a two digit number e.g. 21:
[≧10, ENTER] → [2] → [1]
Select PRESET tuning mode.(á page 16, “Select MANUAL or PRESET tuning mode”)
Select the preset channels.
Hold down the button to change channels faster.
Multi control tuner settings
Enter Multi
control mode.
Main menu is displayed.
(Multi control mode menus
and factory...](http://img.usermanuals.tech/thumb/58/62368/w300_sa-xr50_en_om_d-16.png "Page 17
17
Operations
RQT7487
Preset tuning
Presetting stations.(á below, “Automatic presetting” or “Manual presetting”)Selecting preset channels
When using the numbered buttonsTo select a two digit number e.g. 21:
[≧10, ENTER] → [2] → [1]
Select PRESET tuning mode.(á page 16, “Select MANUAL or PRESET tuning mode”)
Select the preset channels.
Hold down the button to change channels faster.
Multi control tuner settings
Enter Multi
control mode.
Main menu is displayed.
(Multi control mode menus
and factory...")
17 Operations RQT7487 Preset tuning Presetting stations.(á below, “Automatic presetting” or “Manual presetting”)Selecting preset channels When using the numbered buttonsTo select a two digit number e.g. 21: [≧10, ENTER] → [2] → [1] Select PRESET tuning mode.(á page 16, “Select MANUAL or PRESET tuning mode”) Select the preset channels. Hold down the button to change channels faster. Multi control tuner settings Enter Multi control mode. Main menu is displayed. (Multi control mode menus and factory...
Page 18
18 Operations RQT7487 Audio settings Bass synthesizer Provides depth of bass for audio play with impact. • When input signal is Dolby digital stereo or DTS stereo, this mode cannot be used. Multi-source re-master This original feature boosts the frequencies of the higher harmonics that are lost during recording due to compression. When Re-master is on, the current level appears. EFFECT 1: For fast tracks (pop and rock) EFFECT 2: For tracks with a variety of tempos (jazz) EFFECT 3: For slow tracks...
Page 19
19 Operations RQT7487 Multi control audio settings Enter Multi control mode.To n e1. Select. 2. Select. 3. Adjust the level. You can adjust the level of the bass and treble. • The STEREO mode must be on and input must be either analog or PCM signals. You cannot adjust the tone if DVD ANALOG 6CH is selected. Main menu is displayed. (Multi control mode menus and factory settings á back cover) Balance1. Select. 2. Adjust the balance. You can adjust the balance of the front speakers. Change the...
Page 20
20 Operations RQT7487 Other functions Making a recording Other Multi control function settings Enter Multi control mode.Dimmer1. Select. 2. Select. • To cancel, select “OFF” 3. Select. . • The brightness changes to show the level. Dim the display for better viewing in a darkened room. Choose a level between 1 (bright) and 3 (dim). Main menu is displayed. (Multi control mode menus and factory settings á back cover) Change the settings. Sleep timer1. Select. 2. Select. • To cancel, select “OFF”• To...