Panasonic Av Control Receiver Sa-xr45, Sa-xr25 Operating Instructions

11
RQT6840
COMPLETE
Adjusting speaker output
level35
SETUP
Change the setting. Select “FILTER”.
FILTER
100
100, 150, 200
Output the signal.
TESTSA-XR25SA-XR45
-TEST/–SETUP
TEST
L
LC R RSSBLSSW
VOLUMEAdjust the main
volume.
–/L+/R
LEVEL
Adjust the level.
C
0dB
C, RS, SB, LS, SW
C
4dB
-10 dB+10 dB---, MIN, 119, MAX
TESTSA-XR25SA-XR45
-TEST/–SETUP
Stop the test signal.
Repeat.
FILTER
Step 3
Two seconds each.
Select the speaker
channel.
Change these settings to suit the
connections you have made to the...

12
RQT6840
Settings
Step 3INPUT MODE
STEREO/
2CH MIXDOLBY
PRO LOGICNEO:6 SFC SLEEP
TONE/
BALANCELEVEL EFFECT
–/L+/R
ENTER
^^
DISC
RECEIVERAV SYSTEM RECEIVER
CD
VCRTUNER/BANDRECEIVER
CH
VOLUME
SKIP
–  TV VOL  +
TOP MENUMENU
DIRECT  NAVIGATOR
DISPLAY
DIMMERSUBWOOFERMUTING TV/VIDEORETURNPLAY
  LIST
SLOW / SEARCH
DIRECT TUNING
TAPE
1
23
7
0 89
10
4
56
>=
DVD
2CH / 6CH
TV
ENTER
gh uit yq
-TEST/–SETUP
ENTER
RETURN
-TEST/–SETUP
On Screen Display mode
¡Use the on screen display to change the settings to suit...

ENTER
Enter the setup menu.SETUPENTER
Select “Other Setups”.Center
Surround
Surr Back
SubwooferSMALL []
YES []
YES []
Other Setups
13
RQT6840
Step 3
23Speaker DistanceFilter Frequency4Digital Input
ENTER
Select “Speaker Distance”.Select “Filter Frequency”.Select “Digital Input”.
Select the speaker.
Select the input position.
Change the setting.Change the setting.
Repeat.
Change the setting.
Repeat.
SETUP
Filter Frequency
D-Range Compression
Digital Input
Speaker Size
ENTER
Speaker Distance
SPEAKER...

Using NEO:6
14
RQT6840
Switch on.
Select input.
Start play of the
source.
The unit sets the sound mode to suit
the input signal.
Adjust the
volume.
1
2
3
4
INPUT SELECTOR
POWER 8
DOWN UPVOLUME
POWER 8DTS DTS-ES NEO:6FM MODEINPUT SELECTORMEMORYVOLUME
PHONESDOWN UP
PRESETTUNE 2TUNE 1% DIGITAL% DIGITAL EX% PL2^DTS 96/24
POWER 8
INPUT SELECTOR
DOWN UPVOLUME
BANDMULTI-SOURCEDIGITAL RE-MASTERENHANCED
SURROUND
ENHANCED
SURROUND
Basic operations
Step 1 2 34
Step 4
INPUT MODE
STEREO/
2CH MIXDOLBY
PRO LOGICNEO:6...

15
RQT6840
Step 4
For your referenceIn rare cases, the unit may have trouble recognizing the digital signals on
discs. 
¡With the PCM signals on CDs, this may cause the beginning of a track
to be cut off. Engage the PCM FIX mode if this occurs.
¡With DTS, the signals may not be recognized at all. Engage the DTS
FIX mode if this occurs.
While the input source is selected:
1. Press [INPUT MODE] to select “DIGITAL”
2. Press and hold [INPUT MODE] for four seconds.
The current mode is displayed. Press again...

POWER 8DTS DTS-ES NEO:6% DIGITAL% DIGITAL EX% PL2^DTS 96/24
TUNEDMONO SLEEP ST
kHz
MHz
DIGITAL
SURROUNDSFC
M2CH
MIX
ENHANCED
L
CR
LS SB RS
S LFE
16
RQT6840
Control guide
Others
Main unit
Display
[POWER 8]Press to switch the unit from on to standby mode or vice
versa.
In standby mode, the unit is still consuming a small amount of
power.
Standby indicator [^]When the unit is connected to the AC mains supply, this
indicator lights up in standby mode and goes out when the
unit is turned on.
Remote control...

FM MODEINPUT SELECTORMEMORYVOLUME
PHONESDOWN UP
PRESETTUNE 2TUNE 1
BANDMULTI-SOURCEDIGITAL RE-MASTERENHANCED
SURROUND
17
RQT6840
Others
[PHONES]Headphone jack
Plug type: 6.3 mm (1/4) stereo
¡Avoid listening for prolonged periods of time to prevent
hearing damage.
¡The STEREO/2CH MIX mode is engaged when you
connect headphones and you cannot select any of the other
sound modes.
[VOLUME]Volume control.
[MEMORY]For presetting radio stations.
[INPUT SELECTOR]For selecting input.
[TUNE, 2, 1]For tuning the...

18
RQT6840
Control guide
Others
[SUBWOOFER]For selecting subwoofer level.
Adjust the level in 5 steps: 
SW MIN, SW 5, SW 10, SW 15, and 
SW MAX.
Select SW 
– – –to stop output.
[-TEST/–SETUP] ( )To start the speaker test signal or
enter the setup menu.
[TEST] ( )To start the speaker test signal.
[TONE/BALANCE]To adjust the bass, treble and front
speaker balance.
[LEVEL]
Use when adjusting speaker level.
[EFFECT]
Use when adjusting Dolby Pro Logic
2, NEO:6 or SFC effects.
[–/L, +/R]First select SLEEP,...

19
RQT6840
Others
The radio
Preset the stations one at a time.
1. Tune to the station.
2. Press [MEMORY].
3. Press [TUNE 2or 1] to select a channel.
4. Press [MEMORY].
For your reference
FM stations can also be preset in the MONO mode.
1. Tune to “FM 87.9 MHz”.
2. Press and hold [MEMORY].
The FM stations the unit can receive are preset in channels 1 to 30.
3. Tune to “AM 530 kHz”.
4. Press and hold [MEMORY].
The AM stations the unit can receive are preset in channels 21 to 30. (FM stations are replaced...

20
RQT6840
Other settings
ADR COMP- Dynamic range compressionChange this setting to listen to software recorded with Dolby Digital at
low volume (such as late at night) and maintain audio clarity. It
reduces the peak level in loud scenes without affecting the sound
field.
OFF: The software is played with the original dynamic range (factory
setting).
STANDARD: The level recommended by the producer of the software
for household viewing.
MAX: The maximum allowable compression (recommended for night...