Panasonic Arbitrator CP Ver.1.9 Quick Reference Guide

							Arbitrator-CP ver.1.9 
Quick Reference Guide 
						

							(A) Register the Officers information (At the beginning of shift)
(1) “Auto”:  Plug USB memory (saved the officer information) to VPU.
(2) “Manual”:   Plug USB memory to VPU and press  “Load” button.  
If 2 officers need to be loaded, pl ug 2 different USB memories to VPU.
(3) “List”:   Press  “Select” button in “Officer” b y Control Panel menu.
(B) Delete the Officer information (At the end of shift)
“Manual”, “List”:  Press “Delete” button in “Officer” by Control Panel menu.
[Manual]
[List]
[Top Menu]
-while REC stopped-
Register OfficersDelete
Officers
Officer Information
Register at the beginning of shift & delete at the end of shift 
						

							When appeared                  in 
Control Panel OSD, execute 
“Restore”
[Camera] 
For users who do not use LPR (License Plate Recognition mode)
(“Init LPR Mode” in Admin set up is “Disable” as a factory default.)
*For LPR users, please go to ”Camera Menu for LPR” for details 
Control Panel Menu for Officer
Adjust manual focus
Adjust image brightness
1.  “IN CAR” for In car Mic (Mic in) 
2.  “WMIC” for 2nd Wireless Mic  (Audio 2 in)
3.  “LINKCAM” to change the Audio 1 or 2 
by linking with the camera changes,
*Audio 1 for Wireless Mic 1 (Audio 1 in)
[Audio]
[Archive]  
Playback the recorded video
[Setup/Info]
[Restore] [Top Menu]
On Screen Type for Control Panel 
“Auto”, “SIMPLE”, “DETAILS” or “OFF”
Camera LED (Camera Tally Light), 
for “ON” or “OFF”
Check Audio
Re-Auto Focusing 
						

							[Camera]1) [LPR Mode] is set to “LPR”
Camera Menu for LPR (License Plate Recognition)
[Top Menu] 
while recording is 
being stopped in the live screen
In order to use LPR (License Plate Recognition) mode, the Administrator needs to set up 
“Init LPR Mode” as “Enable” in Admin/Camera menu.*If setting up “Init LPR Mode” as “ Disable”, there will be no  “LPR Mode”, “LPR/Patrol Shutter Speed”, “LPR/Patrol Zoom” on screen as shown 
below.  (Just “Auto Focus”, “Manual Focus” or “AE” can be selectable and changed  in “Camera” menu.)
2) [LPR Mode] is set to “PATROL”
[Top Menu] 
while the live screen 
is  being recorded
Select “Auto”, 
“1/500”, or “1/1000”
“LPR” for LPR ON
“Patrol” for LPR OFFSelect “Auto”, “1/100”
“1/500”, or “1/1000”
Set x1.0 to x22.0
[Camera]1) [LPR Mode] is set to “LPR”
2) [LPR Mode] is set to “PATROL”
LPR ON
LPR OFF 
						

							REC LED 
Lights up in RED while recording
Backlight compensation
to make it brighter 
T(TELE) for Zoom In
W(WIDE) for Zoom Out
*Keep pressing this button for more than 2 seconds  will stop recording.
Rear panel LED Control
Auto Zoom 
Camera  Control  Connector for VPU
SUN Shade
Control Reference Guide
Front Camera (AG-CK10P)
REC Start and STOP 
						

							REC 
button
REC 
LED
STOP
button READY lamp
Lights up when 
recording is readyBUSY lampLights up or flashes 
while a P2 card is accessed.
Key LockLocks and unlocks 
the P2 Card slot cover
P2 card 
slot cover
P2 card  slot 1, 2
Control Reference GuideP2 Recorder - VPU (AG-CPD15P) 
						

							LCD 
Screen
Auto 
Zoom
Book 
Mark
Backlight
CompensationT: Zoom In 
W: Zoom Out
REC/STOP 
LampREC 
ButtonSTOP
Button
Audio 2 Mute 
Button/LampMute Audio 2 and lamp lights 
on by pushing this button.  
No recording while muting 
(lights on)
IR Mode(Auto/ON/OFF)
Volume
Control Brightness
Control Control Panel
ON/OFF Live/Archive
Switching Button Skip 
(Back/Forward)
Return
To go back to previous 
menu or settingCursor Button 1) Lock LampLock except “REC”, “Menu”, 
“Control Panel ON/OFF”, 
“Return” Button while lights on2) Ready Lamp
3) Busy Lamp
Camera 
Select(Camera1/2))
Menu
Control Reference Guide
Control Panel (AG-RCP30P) 
						

							TALK ON : Green LED
BATT :  Red-Charging,  Green-Fully charged
TALK Button:
Press for REC
MUTE Button
MODE Selection Button
Lavalier Mic 
Input
Built-in Mic
Control Reference Guide
Digital Wireless Microphone TX and RX (CCR24PNA)
Transmitter (TX) 
with Receiver (RX)
Transmitter (Top View) 
Please refer to CCR24PNA User Guide for more operation information
Transmitter (Bottom View) 
ON/OFF
Switch 
						

							Control Reference Guide
(CCR24PNA Vibration / LED Indication)
1. Default mode when power on.
2.  After synchronized, the mode goes back to the last.
3.  Please refer to CCR24PNA User Guid e for more operation information
Mode 
Selection when Tx is 
ready when Tx is 
under 
recording  mode when Tx is 
under 
Low Battery  status when Tx is 
under 
Out Of Range  status when Mute is initiatedVibration 
and 
LED No Vibration
Vibration 
(one time only) Vibration 
(1 time per second) Vibration 
(2 times per 3 seconds) Vibration 
(1 time per 5 seconds)
GREEN On GREEN Blink RED Blink RED On
Tx is not recording: 
GREEN On  & RED Fast Blink 
--------------------------------------------  Tx is under recording: 
GREEN Blink  & RED Fast Blink
Vibration Only No VibrationVibration 
(one time only) Vibration 
(1 time per second) Vibration 
(2 times per 3 seconds) Vibration 
(1 time per 5 seconds)
None No Vibration 
No LED