Panasonic Aj Ya610 Operating Instructions Manual

AJ- P
Video Input Recording Board
Operating Instructions 

2
Package Contents
OVIDEO I/F board
OROM IC
OWarranty card
OList of Service Centers
OFor information on installing this product, contact your deal-
er or a Panasonic Service Center.
ODo not touch the connector terminals directly with your
hands.
OIf the board will not go in easily, it may be oriented back-
wards. Do not try to force it. Instead, check to make sure
the board’s orientation is correct.
CAUTION:
These servicing instructions are for use by qualified
service personnel only.  To reduce the risk...

3
Installation in the Camera-recorder
In order to record video input signals, the VIDEO I/F board and
ROM IC (on the VTR SYSCON board) must first be replaced.
To accomplish this, follow the procedure below.
OMake sure the camera-recorder power is off before
beginning the installation procedure.
1Loosen the four screws indicated and remove the side panel
containing the camera-recorder’s display window.
2Loosen the single screw indicated and then remove the
board holder fitting.
Screw
Board holder fitting...

4
f
d
f
4Remove the VTR SYSCON board Dand replace the ROM
IC (IC6) mounted on it with the ROM IC supplied as part of
this product.
5After replacing the ROM IC, reinstall the VTR SYSCON
board 
Din the camera-recorder.
6Engage the board holder fitting and replace the side panel.
(Secure both in place using the screws.)
3Remove the VIDEO I/F board finstalled in the camera-
recorder and replace it with the VIDEO I/F board 
fsupplied
as part of this product.
VTR SYSCON board
Replace ROM IC.
Replace VIDEO I/F...

By installing this product in the AJ-D610WAP camera recorder
the REC SIGNAL item will appear on the REC
(ASPECT)/RET screen menu.
MAIN Menu Screen 3 of 4 (SUB menus)
REC (ASPECT)/RET screen
ItemVariable
rangeRemarks
REC SIGNAL CAMVIDEO
VF dis-
play
USER
ENGThis selects the video input sig-
nals.
CAM:Signals input from the
camera.
VIDEO:Signals input from the
GENLOCK IN connec-
tor.

Even when VIDEO has been
selected as the REC SIGNAL
item setting, the setting will
revert to CAM when the power is
turned...

PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY
DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA
Executive Office:
3330 Cahuenga Blvd W., Los Angeles, CA 90068   (323) 436-3500
EASTERN ZONE: 
One Panasonic Way 4E-7, Secaucus, NJ 07094   (201) 348-7621
Southeast Region:
1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024   (770) 338-
6835
Central Region:
1707 N Randall Road E1-C-1, Elgin, IL 60123   (847) 468-5200
WESTERN ZONE: 
3330 Cahuenga Blvd W., Los Angeles, CA 90068   (323) 436-3500...