Panasonic Aj Sdc915 Operating Instructions Manual
Have a look at the manual Panasonic Aj Sdc915 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
– 111 – Set ting Menu Screens (MAIN menus) MAIN menu screen 4 of 4 This screen displays the sub menu items on MAIN menu 4 of 4. Note It is not possible to open the MAIN menu screen 4 of 4 using the user menu. To open this screen, establish the engineer mode. MA I N ME NU 4 / 4 USER MENU SE L 1 / 3 USER MENU SE L 2 / 3 USER MENU SE L 3 / 3 AUTO SHAD I NG EVALUAT I ON INITIALIZE DIAGNOST ICEE¢EE EEEESUB menu USER MENU SEL 1/3 USER MENU SEL 2/3 USER MENU SEL 3/3 AUTO SHADING EVALUATION INITIALIZE DIAGNOSTIC VF display USER ENG USER ENG USER ENG USER ENG USER ENG USER ENG USER ENG Remarks Index for opening the “USER MENU SEL 1 of 3” SUB menu. Index for opening the “USER MENU SEL 2 of 3” SUB menu. Index for opening the “USER MENU SEL 3 of 3” SUB menu. Index for opening the “AUTO SHADING” SUB menu. Index for opening the “EVALUATION” SUB menu. Index for opening the “INITIALIZE” menu. Index for opening the “DIAGNOSTIC” SUB menu.
–112–
Menu screen display methods
USER menu:The USER menu appears when the MENU switch is set to SET.
ENG menu:The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
held down together.
MAIN Menu Screen 1 of 4 (SUB menus)
ROP screen
The ROP (remote operation panel) settings are performed on this screen.
¢|
ROP{
MA S T E R
MA S T E R
MA S T E RPED
µ00
. 045
µ000 µ000
µ000
µ000
µ000
µ :
:
:
:
:
:
:
:
000 DT L
GAMMA
RGAIN
GA I N B
RPEDESTAL
PEDESTA L
PEDESTA L G
BItem
MASTER PED
MASTER DTL
MASTER
GAMMA
R GAIN
B GAIN
R PEDESTAL
G PEDESTAL
B REDESTAL
Remarks
For setting the master pedestal level.
This sets the H.DTL/V.DTL level.
This sets the master gamma (in 0.01
increments).
Different settings for LOW, MID and
HIGH can be stored in the memory.
This sets the R channel gain.
This sets the B channel gain.
This sets the R channel pedestal level.
This sets the G channel pedestal level.
This sets the B channel pedestal level.
VF
display
USER
ENG
USER
ENG
USER
ENG
USER
ENG
USER
ENG
USER
ENG
USER
ENG
USER
ENG
100
.
.
.
0
.
.
.
100
(max.)
15
.
.
.
0
.
.
.
15
0.35
.
.
.
0.45
.
.
.
0.75
100
.
.
.
0
.
.
.
100
(max.)
100
.
.
.
0
.
.
.
100
(max.)
100
.
.
.
0
.
.
.
100
(max.)
100
.
.
.
0
.
.
.
100
(max.)
100
.
.
.
0
.
.
.
100
(max.)
–113–
Note
The white balance and black bal-
ance remain unchanged even when
the MATRIX item settings are
changed.
The underlining in the variable range column indicates the setting in the preset mode.
Note
Two tables, A and B, can be stored for MATRIX TABLE.
“00” is the setting for all the MATRIX TABLE B items in the preset mode.
USER menu:The USER menu appears when the MENU switch is set to SET.
ENG menu:The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
held down together.
MAIN Menu Screen 1 of 4 (SUB menus)
MATRIX screen
The camera’s matrix settings are performed on this screen.
¢|{
: MA T R I X
MA T R I X
MA T R I X
MA T R I X
MA T R I X
MA T R I X
MA T R I X
MA T R I XTA ABLE
:
µ11
:
µ09
:
µ05
:
µ15
:
µ11
:
µ11 R∂G
R∂B
G∂R
G∂B
B∂R
B∂G
»
Item
MATRIX TABLE
MATRIX R-G
MATRIX R-B
MATRIX G-R
MATRIX G-B
MATRIX B-R
MATRIX B-G
A
B
31
.
.
.
11
.
.
.
31
31
.
.
.
9
.
.
.
31
31
.
.
.
5
.
.
.
31
31
.
.
.
15
.
.
.
31
31
.
.
.
11
.
.
.
31
31
.
.
.
11
.
.
.
31
Remarks
This selects the color adjustment table.
This adjusts the color.
This adjusts the color.
This adjusts the color.
This adjusts the color.
This adjusts the color.
This adjusts the color.
VF
display
ENG
ENG
ENG
ENG
ENG
ENG
ENG
indicates an ON/OFF setting.
–114–
MAIN Menu Screen 1 of 4 (SUB menus)
LOW SETTING screen
The low level gain settings are performed on this screen.
Note
DARK DTL and LEVEL DEPEND
serve opposite purposes: LEVEL
DEPEND is automatically set to 0
when DARK DTL is set to a value
other than 0 and, conversely, DARK
DTL is automatically set to 0 when
LEVEL DEPEND is set to a value
other than 0.
The underlining in the variable range column indicates the setting in the preset mode.
USER menu:The USER menu appears when the MENU switch is set to SET.
ENG menu:The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
held down together.
3 dB
.
.
.
0 dB
.
.
.
30 dB
0
.
.
.
10
.
.
.
31
0
.
.
.
10
.
.
.
31
0
.
.
.
3
.
.
.
15
1
.
.
.
3
.
.
.
5
0
.
.
.
5
0
.
.
.
15
0.35
.
.
.
0.45
.
.
.
0.75
ON
OFF
A
B
OFF
Remarks
This sets the gain to 3, 0, 3, 6, 9, 12,
15, 18, 21, 24 or 30 dB.
This sets the H.DTL (detail) level.
This sets the V.DTL (detail) level.
This sets the DTL coring.
This selects the H.DTL frequency.
1: 2.5 MHz4: 4 MHz
2: 3 MHz5: 4.5 MHz
3: 3.5 MHz
This sets the dark detail.
This boosts the detail of the black
areas.
This sets LEVEL DEPEND.
This eliminates the detail only in the
dark areas when the Y detail is
boosted. The higher the number
selected, the wider the range across
which the detail is eliminated.
This sets the master gamma in
0.01 increments.
This selects ON or OFF for the mode
in which low-illumination blackouts are
compensated for.
This selects the color compensation
matrix table.
VF
display
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
¢|
LOW SET T I NG{
MA S T E R
MA S T E RGA I N:
:
:
:
:
:
:
:
:
:0dB
H.DTL
H.DTL
DT LL EVE L
L EVE L.DTL
DT LL EVE L10
V10
COR I NG 0 3
FREQ . 0 3
DARK 0 0
DEPEND . 0 0
GAMMA 0 . 4 5
B L ACK S TRE TCH OF F
TABLE A MA T R I X
»
»
»
Item
MASTER GAIN
H.DTL LEVEL
V.DTL LEVEL
DTL CORING
H.DTL FREQ.
DARK DTL
LEVEL DEPEND.
MASTER
GAMMA
BLACK
STRETCH
MATRIX TABLE
indicates an ON/OFF setting.
–115–
MAIN Menu Screen 1 of 4 (SUB menus)
MID SETTING screen
The middle level gain settings are performed on this screen.
Note
DARK DTL and LEVEL DEPEND
serve opposite purposes: LEVEL
DEPEND is automatically set to 0
when DARK DTL is set to a value
other than 0 and, conversely, DARK
DTL is automatically set to 0 when
LEVEL DEPEND is set to a value
other than 0.
The underlining in the variable range column indicates the setting in the preset mode.
USER menu:The USER menu appears when the MENU switch is set to SET.
ENG menu:The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
held down together.
¢|
MI D SETT I NG{
5 MA S T E R
MA S T E RGA I N:
:
:
:
:
:
:
:
:
:9dB
H.DTL
H.DTL
DT LL EVE L
L EVE L.DTL
DT LL EVE L10
V10
COR I NG 0 6
FREQ 0 3
DARK 0 0
DEPEND . 0 3
GAMMA 0 ..
4
B L ACK S TRE TCH OF F
TABLE A MA T R I X
»
»
»
Item
MASTER GAIN
H.DTL LEVEL
V.DTL LEVEL
DTL CORING
H.DTL FREQ.
DARK DTL
LEVEL DEPEND.
MASTER
GAMMA
BLACK
STRETCH
MATRIX TABLE
3 dB
.
.
.
9 dB
.
.
.
30 dB
0
.
.
.
10
.
.
.
31
0
.
.
.
10
.
.
.
31
0
.
.
.
6
.
.
.
15
1
.
.
.
3
.
.
.
5
0
.
.
.
5
0
.
.
.
3
.
.
.
15
0.35
.
.
.
0.45
.
.
.
0.75
ON
OFF
A
B
OFF
Remarks
This sets the gain to 3, 0, 3, 6, 9, 12,
15, 18, 21, 24 or 30 dB.
This sets the H.DTL (detail) level.
This sets the V.DTL (detail) level.
This sets the DTL coring.
This selects the H.DTL frequency.
1: 2.5 MHz4: 4 MHz
2: 3 MHz5: 4.5 MHz
3: 3.5 MHz
This sets the dark detail.
This boosts the detail of the black
areas.
This sets LEVEL DEPEND.
This eliminates the detail only in the
dark areas when the Y detail is
boosted. The higher the number
selected, the wider the range across
which the detail is eliminated.
This sets the master gamma in
0.01 increments.
This selects ON or OFF for the mode
in which low-illumination blackouts are
compensated for.
This selects the color compensation
matrix table.
VF
display
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
indicates an ON/OFF setting.
–116–
MAIN Menu Screen 1 of 4 (SUB menus)
HIGH SETTING screen
The high level gain settings are performed on this screen.
Note
DARK DTL and LEVEL DEPEND
serve opposite purposes: LEVEL
DEPEND is automatically set to 0
when DARK DTL is set to a value
other than 0 and, conversely, DARK
DTL is automatically set to 0 when
LEVEL DEPEND is set to a value
other than 0.
The underlining in the variable range column indicates the setting in the preset mode.
USER menu:The USER menu appears when the MENU switch is set to SET.
ENG menu:The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
held down together.
¢|
HIGH SETT ING{
5 MA S T E R
MA S T E RGA I N:
:
:
:
:
:
:
:
:
:18dB
H.DTL
H.DTL
DT LL EVE L
L EVE L.DTL
DT LL EVE L V
COR I NG 1 0
FREQ 0 310
10
DARK 0 0
DEPEND . 0 8
GAMMA 0 ..
4
B L ACK S TRE TCH OF F
TABLE A MA T R I X
»
» »
Item
MASTER GAIN
H.DTL LEVEL
V.DTL LEVEL
DTL CORING
H.DTL FREQ.
DARK DTL
LEVEL DEPEND.
MASTER
GAMMA
BLACK
STRETCH
MATRIX TABLE
3 dB
.
.
.
18 dB
.
.
.
30 dB
0
.
.
.
10
.
.
.
31
0
.
.
.
10
.
.
.
31
0
.
.
.
10
.
.
.
15
1
.
.
.
3
.
.
.
5
0
.
.
.
5
0
.
.
.
8
.
.
.
15
0.35
.
.
.
0.45
.
.
.
0.75
ON
OFF
A
B
OFF
Remarks
This sets the gain to 3, 0, 3, 6, 9, 12,
15, 18, 21, 24 or 30 dB.
This sets the H.DTL (detail) level.
This sets the V.DTL (detail) level.
This sets the DTL coring.
This selects the H.DTL frequency.
1:2.5 MHz4:4 MHz
2:3 MHz5:4.5 MHz
3:3.5 MHz
This sets the dark detail.
This boosts the detail of the black
areas.
This sets LEVEL DEPEND.
This eliminates the detail only in the
dark areas when the Y detail is
boosted. The higher the number
selected, the wider the range across
which the detail is eliminated.
This sets the master gamma in
0.01 increments.
This selects ON or OFF for the mode
in which low-illumination blackouts are
compensated for.
This selects the color compensation
matrix table.
VF
display
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
indicates an ON/OFF setting.
–117–
MAIN Menu Screen 1 of 4 (SUB menus)
ADDITIONAL DTL screen
The special detail settings of the camera are performed on this screen.
µ00
µ16 ADDITIONAL
CCOMPE.:
:
:
:
:
:
:
:
:OF F
OF F
O CHROMA 0
KNEE APERTURE ON
N SL I M
CORN E R
GA I N(
µ)
CL I P 0 0
H. L INE MIX 1H
¢|
DT L
DT L
DT L
DT L
DT L
GA I N(
∂)
DT L
DT L
DT L DT L{
»
»
»
»
Item
C DTL COMPE.
CHROMA DTL
KNEE
APERTURE
SLIM DTL
CORNER DTL
DTL GAIN ()
DTL GAIN ()
DTL CLIP
H.DTL LINE MIX
ON
OFF
0–2
ON
OFF
ON
OFF
ON
OFF
31
.
.
.
0
.
.
.
31
31
.
.
.
16
.
.
.
31
0
.
.
.
31
0H
1H
2H
Remarks
This selects ON or OFF for the chroma
DTL.
This sets the chroma DTL.
This detects the chroma edge and
superimposing it onto Y to boost the H
detail.
The higher the number selected, the
greater the level of compensation
provided.
This selects ON or OFF for the knee
aperture.
This boosts the detail above the knee
point.
This selects ON or OFF for mode in
which the detail is made finer.
This selects ON or OFF for mode
which increases the resolution at the
edges of the screen.
This changes the H detail level in the
“” direction.
This changes the H detail level in the
“” (downward) direction.
This changes the clipping of the detail
signals in the “” direction.
This sets the addition of the scanning
lines for generating H detail signals.
VF
display
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
The underlining in the variable range column indicates the setting in the preset mode.
USER menu:The USER menu appears when the MENU switch is set to SET.
ENG menu:The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
held down together. indicates an ON/OFF setting.
–118–
MAIN Menu Screen 1 of 4 (SUB menus)
SKIN TONE DTL screen
The camera’s skin tone detail settings are performed on this screen.
Item
SKIN TONE DTL
SKIN TONE HUE
SKIN TONE
LEVEL
SKIN TONE
WIDTH
SKIN TONE
CORING
SKIN TONE
ZEBRA
Variable
range
ON
OFF
103
.
.
.
143
1
.
.
.
25
.
.
.
50
1
.
.
.
15
.
.
.
30
1
.
.
.
5
.
.
.
15
ON
OFF
Remarks
This selects ON or OFF for the skin
tone detail.
This sets the skin tone hue (for setting
the phase of the skin tone detection
range).
The hue is changed in the phase
direction.
This sets the skin tone level (for setting
the intensity of the colors in the skin
tone detection range).
The level is changed in the amplitude
direction.
This sets the skin tone width
This sets the range of colors to be
treated as the skin tone from among
the colors set by SKIN TONE HUE and
LEVEL.
The higher the number selected, the
wider the skin tone range.
This sets the skin tone coring.
The amount of detail in the skin tone
range is changed.
This selects ON or OFF for ZEBRA in
the skin tone range.
This changes the coring in the range
across which ZEBRA can be seen.
VF
display
ENG
ENG
ENG
ENG
ENG
ENG
The underlining in the variable range column indicates the setting in the preset mode.
USER menu:The USER menu appears when the MENU switch is set to SET.
ENG menu:The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
held down together. indicates an ON/OFF setting.
Note
All the displays except the change
data are cleared while the hue, level,
width and coring data of the skin
tone is being changed.
The underlining in the variable range
column indicates the setting in the
preset mode.
SK I N TONE
SK I N TONE
SK I N TONE
SK I N TONE
SK I N TONE
SK I N TONE
SK I N TONE:
:
:
:
:OF F
15
05
:
OF F103
25¢|
DT L
DT L
HUE
LEV
WID
COR
ZEBREL
TH
IGN
A{
»
»
–119– MAIN Menu Screen 1 of 4 (SUB menus) KNEE/LEVEL screen The knee level settings of the camera are performed on this screen. Item M.PED SET UP 50 SET UP 25 MANUAL KNEE KNEE POINT KNEE SLOPE WHITE CLIP WHITE CLIP LVL AUTO KNEE POINT AUTO KNEE LVL 100 . . . 000 . . . 100 0% 7.5%A 0% 7.5% 7.5%A ON OFF 75 . . . 85 . . . 90 0 . . . 16 . . . 25 ON OFF 90% . . . 107% . . . 110% 75 . . . 85 . . . 90 100 . . . 105 . . . 110 Remarks This sets the master pedestal level. This selects the setup level. 0%:0% setup for both the camera output and tape. 7.5%:7.5% setup for both the camera output and tape. 7.5%A:7.5% setup for the camera output; 0% setup for the tape. When the setup level is changed to 7.5%A, the chroma level and burst level on the CAM ENC circuit board must be re- adjusted. This sets the mode to be established when the AUTO KNEE switch is set to OFF. This sets the manual knee point position. This sets the manual knee slope. This selects ON or OFF for the white clip. This sets the white clip level. This sets the automatic knee point position. This sets the maximum level of the automatic knee. VF display ENG ENG ENG ENG ENG ENG ENG ENG ENG The underlining in the variable range column indicates the setting in the preset mode. USER menu:The USER menu appears when the MENU switch is set to SET. ENG menu:The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are held down together. 00 M. PED: 0 SETUP: KNEE / L EVE L ∫ ∫: : : : : : :% MA NU A L ON PO I N T PO I N T85 50 SLOPE 1 6 WH I TE CL I PWH I TE CL I PON LVL LVL107% 7.5 A % 7.5 A SETUP: 25 AUTO AUTO085 105 KNEE KNEE KNEE KNEE KNEE ∫ ∫ r >ON indicates an ON/OFF setting.
–120–
Item
R FLARE
G FLARE
B FLARE
R GAMMA
B GAMMA
0
.
.
.
100
0
.
.
.
100
0
.
.
.
100
15
.
.
.
0
.
.
.
15
15
.
.
.
0
.
.
.
15
VF
display
ENG
ENG
ENG
ENG
ENG
MAIN Menu Screen 1 of 4 (SUB menus)
FLARE/GAMMA screen
The flare and gamma settings of the camera are performed on this screen.
µ00 µ00
FLARE
FLARE
FLARE
FLARE/GAMMA
GAMMA
GAMMA{
R:
000
G:
000
B:
000
R:
B:¢|
CAMERA SETTING screen
The basic settings of the camera are performed on this screen. Before each screen item is an asterisk (“”) or dot (“.”) which
respectively indicates whether the setting is ON or OFF.
:ON
.
: OFF
Item
DETAIL
2D LPF
SUPER COLOR
GAMMA
TEST SAW
FLARE
H-F COMPE.
NEGATIVE DTL
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Remarks
This selects ON or OFF for the H and
V detail. (The ON or OFF setting
applies to both the H and V detail.)
This selects ON or OFF for the
2-dimensional low-pass filter, which
reduces cross-color.
This selects ON or OFF for the mode
in which the dynamic range of the
color is to be expanded.
The item is used to boost the color
above the knee point.
This selects ON or OFF for the gamma
correction.
This selects ON or OFF for the test
signal.
This selects ON or OFF for the flare
compensation.
This selects ON or OFF for the mode
in which the high-frequency detail is
enhanced.
This selects ON or OFF for the DTL
signal from the setup level (7.5%) to
the blanking level.
VF
display
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
CAMERA / SE T T I NG{
EDE T A I L.2D LPFESUPER COLOR
ENEGA T I VE DT L
EGAMMA.TEST SAWEFLAREEH∂FCOMPE
¢|
The underlining in the variable range
column indicates the setting in the
preset mode.
USER menu:The USER menu ap-
pears when the
MENU switch is set
to SET.
ENG menu:The ENG menu ap-
pears when the
MENU switch is set
to SET while the
SHIFT/ITEM button
and UP button are
held down together.
Remarks
This sets the R channel flare.
The preset value differs depending on
the camera.
This sets the G channel flare.
The preset value differs depending on
the camera.
This sets the B channel flare.
The preset value differs depending on
the camera.
This sets the correction value for the R
channel gamma in respect of the
master gamma level.
This sets the correction value for the B
channel gamma in respect of the
master gamma level.