Panasonic Aj Sd930be Operating Instructions Manual
Have a look at the manual Panasonic Aj Sd930be Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 71
71 (E)
CONTENTS
The VTR can be operated by commands when the
RS-232C interface is used.
(See command table on pages 74, 75.)
$Conditions for acknowledging
commands from RS-232C interface
OThe front panel CONTROL switch must be at
REMOTE.
OThe setup menu No. 204 “RS232C SEL” must be
ON.
If the above conditions are not met, [ACK] + [STX]
ER001 [EXT] is returned to the external unit.
Whether the [ACK] code is returned depends on the
setting which has been selected for setup menu
item No. 209 “RETURN ACK”....](http://img.usermanuals.tech/thumb/58/67797/w64_aj-sd930be_en_om_d-70.png "Page 71
71 (E)
CONTENTS
The VTR can be operated by commands when the
RS-232C interface is used.
(See command table on pages 74, 75.)
$Conditions for acknowledging
commands from RS-232C interface
OThe front panel CONTROL switch must be at
REMOTE.
OThe setup menu No. 204 “RS232C SEL” must be
ON.
If the above conditions are not met, [ACK] + [STX]
ER001 [EXT] is returned to the external unit.
Whether the [ACK] code is returned depends on the
setting which has been selected for setup menu
item No. 209 “RETURN ACK”....")
![Page 73
73 (E)
CONTENTS
RS-232C interface
3. Return format
[VTR 5controller (PC)]
The following responses are made to the command. If
necessary, more than one response is made.
$When the communication has terminated
normally
1. The receive completion message is returned.
[ACK]
06h
2. The execution completion message is returned.
[STX] [command] [data] [ETX]
02h XX XX XX XX.....
XX 03h
[command] :
This is the message (data) which is returned or
the execution completion message identifier.
[data] :
This is the...](http://img.usermanuals.tech/thumb/58/67797/w64_aj-sd930be_en_om_d-72.png "Page 73
73 (E)
CONTENTS
RS-232C interface
3. Return format
[VTR 5controller (PC)]
The following responses are made to the command. If
necessary, more than one response is made.
$When the communication has terminated
normally
1. The receive completion message is returned.
[ACK]
06h
2. The execution completion message is returned.
[STX] [command] [data] [ETX]
02h XX XX XX XX.....
XX 03h
[command] :
This is the message (data) which is returned or
the execution completion message identifier.
[data] :
This is the...")
![Page 74
74 (E)
CONTENTS
RS-232C interface
5. Command table
$Commands relating to operation control
OAs for the return (completion) message, [ACK] is
first returned when data is received, and the
execution message is subsequently returned. It
is only the execution message which is listed in
this table.
OIn the case of commands not listed in the table,
ER001 (invalid command) is returned after [ACK]
has been returned.
VTR
operationSend command
STOP[STX] OSP [ETX]45[STX] OSP [ETX]
This command is for stopping the...](http://img.usermanuals.tech/thumb/58/67797/w64_aj-sd930be_en_om_d-73.png "Page 74
74 (E)
CONTENTS
RS-232C interface
5. Command table
$Commands relating to operation control
OAs for the return (completion) message, [ACK] is
first returned when data is received, and the
execution message is subsequently returned. It
is only the execution message which is listed in
this table.
OIn the case of commands not listed in the table,
ER001 (invalid command) is returned after [ACK]
has been returned.
VTR
operationSend command
STOP[STX] OSP [ETX]45[STX] OSP [ETX]
This command is for stopping the...")
![Page 75
75 (E)
CONTENTS
RS-232C interface
$Commands relating to inquiries
OAs for the return (completion) message, [ACK] is
first returned when data is received, and the
execution message is subsequently returned. It
is only the execution message which is listed in
this table.
OIn the case of commands not listed in the table,
ER001 (invalid command) is returned after [ACK]
has been returned.
VTR
operationSend command
CTL/TC DATA
REQUEST[STX] QCD [ETX]45[STX] CD data [ETX]
This command is for inquiring about the...](http://img.usermanuals.tech/thumb/58/67797/w64_aj-sd930be_en_om_d-74.png "Page 75
75 (E)
CONTENTS
RS-232C interface
$Commands relating to inquiries
OAs for the return (completion) message, [ACK] is
first returned when data is received, and the
execution message is subsequently returned. It
is only the execution message which is listed in
this table.
OIn the case of commands not listed in the table,
ER001 (invalid command) is returned after [ACK]
has been returned.
VTR
operationSend command
CTL/TC DATA
REQUEST[STX] QCD [ETX]45[STX] CD data [ETX]
This command is for inquiring about the...")
![Page 79
79 (E)
CONTENTS
[GENERAL]
indicates safety information. Power supply:AC 100 – 240 V, 50 – 60 Hz
Power consumption:120 W (with all options)
Operating ambient temperature:
5°C to 40°C
Operating ambient humidity:
10% to 80% (no condensation)
Weight:
14.9 kg (AJ-SD930B)
15.0 kg (AJ-SD955B)
Dimensions (WaHaD):
424a175.2a430 mm
(Not including the support legs, connectors, and JOG dial)
Recording format:
DVCPRO50/DVCPRO format selectable
Recording video signal:
AJ-SD930B : 625i system
AJ-SD955B : 525i/625i...](http://img.usermanuals.tech/thumb/58/67797/w64_aj-sd930be_en_om_d-78.png "Page 79
79 (E)
CONTENTS
[GENERAL]
indicates safety information. Power supply:AC 100 – 240 V, 50 – 60 Hz
Power consumption:120 W (with all options)
Operating ambient temperature:
5°C to 40°C
Operating ambient humidity:
10% to 80% (no condensation)
Weight:
14.9 kg (AJ-SD930B)
15.0 kg (AJ-SD955B)
Dimensions (WaHaD):
424a175.2a430 mm
(Not including the support legs, connectors, and JOG dial)
Recording format:
DVCPRO50/DVCPRO format selectable
Recording video signal:
AJ-SD930B : 625i system
AJ-SD955B : 525i/625i...")
![Page 80
80 (E)
CONTENTS
Specifications
[VIDEO]
$Video output connector
Analogue component output:
BNCa3 (Y, PB, PR)
Y: 1.0 V [p-p], PB/PR: 0.7 V [p-p],
75Ω(100% colour bar)
Analogue composite output:
BNCa3, video 1, video 2 (video/WFM selectable), video 3
(superimpose on/off)
SDI output:
BNCa3, complies with ITU-R BT.656-4 standard
SDI 1, SDI 2, SDI 3 (superimpose on/off)
SDTI output (option):
BNCa2, complies with SMPTE 305M/321M standard
$Video signal adjustment
Video output gain:
±3 dB
Video output chroma...](http://img.usermanuals.tech/thumb/58/67797/w64_aj-sd930be_en_om_d-79.png "Page 80
80 (E)
CONTENTS
Specifications
[VIDEO]
$Video output connector
Analogue component output:
BNCa3 (Y, PB, PR)
Y: 1.0 V [p-p], PB/PR: 0.7 V [p-p],
75Ω(100% colour bar)
Analogue composite output:
BNCa3, video 1, video 2 (video/WFM selectable), video 3
(superimpose on/off)
SDI output:
BNCa3, complies with ITU-R BT.656-4 standard
SDI 1, SDI 2, SDI 3 (superimpose on/off)
SDTI output (option):
BNCa2, complies with SMPTE 305M/321M standard
$Video signal adjustment
Video output gain:
±3 dB
Video output chroma...")
CONTENTS S0903W Panasonic Broadcast Europe Panasonic Broadcast Europe Ltd West Forest Gate, Wellington Road, Wokingham, Berkshire RG40 2AQ U.K. Tel: 0118 902 9200 Panasonic Broadcast Europe GmbH Hagenauer Str. 43, 65203 Wiesbaden-Biebrich Deutschland Tel: 49-611-1816-0 E