Panasonic Aj Hdc27a Operating Instructions Manual

90
Setting menu screens (CAM MAIN MENU 4)
CAM USER MENU SELECT 1, 2 and 3 screens
The settings for registering the items (the same as the ones on the CAM MAIN MENU 1, 2 and 3 screens)
allocated to the SUB menus to the SUB MENU screen are performed on this screen.
Registration ON (¢ ¢
) or OFF (≥
) is set at the head of each item.
Up to 42 camera unit items can be registered.
CAM USER MENU SELECT 1 screen
SUB menuVF
displayRemarks
ROPENG Index for opening the ROP screen.
LOW SETTINGENG Index for opening...

91
BLACK SHADING screen
The black shading adjustments are performed on this
screen.
ItemVariable
rangeRemarks
DETECTION==VF
displayENG For execution of the digital
shading compensation.
CORRECT (DIG) ONOFFENG For setting the digital
shading compensation to
ON or OFF.
The underlining in the variable range column indicates the setting in the preset mode.
Setting menu screens (CAM MAIN MENU 4)
WHITE SHADING screen
The white shading adjustments are performed on this
screen.
ItemVariable
rangeRemarks...

92
The underlining in the variable range column indicates the setting in the preset mode.
Setting menu screens (CAM MAIN MENU 4)
DIAGNOSTIC screen
The usage statuses and software versions are
displayed on this screen.
ItemVariable
rangeRemarks
CAMSOFT (IN)==VF
displayENG For displaying the version
of the software for the
built-in flash memory.
CAMSOFT (OUT)==ENG For displaying the version
of the software for the
external flash memory.
GAMMA GAIN==ENG For displaying the version
of the gamma table.
GAMMA...

93
Setting menu screens (CAM MAIN MENU 4)
EVALUATION screen
The underlining in the variable range column indicates the setting in the preset mode.
OS/N measurement screen
The S/N measurements are performed on this screen.
ItemVariable
rangeRemarks
S/N ON
VF
display
ENGFor setting the S/N
measurement.
DETAIL ON
OFFENG For setting the DETAIL to
ON or OFF.
H-F COMPE. ON
OFFENG For setting the high-
frequency compensation
to ON or OFF.
GAMMA ON
OFFENG For setting the GAMMA to
ON or OFF.
MATRIX ON
OFFENG For...

94
VTR MAIN MENU screen
SUB menuVF
displayRemarks
FUNCTIONENG Index for opening the FUNCTION
screen.
BATTERY/
TAPEENG Index for opening the BATTERY/TAPE
screen.
BATTERY
SETTINGENG Index for opening the BATTERY
SETTING screen.
VTR VF
INDICATORENG Index for opening the VTR VF
INDICATOR screen.
MIC/AUDIOENG Index for opening the MIC/AUDIO
screen.
TC/UBENG Index for opening the TC/UB screen.
TIME/DATEENG Index for opening the TIME/DATE
screen.
VTR USER
MENU SELECTENG Index for opening the VTR USER
MENU...

95
Setting menu screens (VTR MAIN MENU)
FUNCTION screen
The VTR’s functions are set on this screen.
ItemVariable
rangeRemarks
NEWS REC
MODEOFF0.2
:
2.0
VF
display
USER
ENGFor selecting the VTR
START button
acknowledgment time
during recording.
OFF:The pressing of the VTR
START button is
acknowledged
immediately, recording is
stopped, and the unit is set
to the REC PAUSE mode.
0.2—2.0:The pressing of the VTR
START button is not
acknowledged and
recording is continued for
the time set (in increments
of 0.2...

96
BATTERY/TAPE screen
The warning tone which signals the remaining battery charge and remaining tape and which is heard during
shooting can be switched off if they prove to be distracting.
ItemVariable
rangeRemarks
BATTERY
SELECTAJ-BP490
AU-BP402
HP-30A
PRO14
TRIM14
TRIM13
DIGITAL14
DIGITAL13
BP-H90
BP-H100
NP-L40NP-L40 DBP-L60/90
NP-1B
VF
display
USER
ENGFor selecting the type of
battery used.
AJ-BP490:AJ-BP490
battery
AU-BP402:AU-BP402
battery
HP-30A:PACO HP-30A
battery 
PRO14:Anton/Bauer
PRO14...

97
Setting menu screens (VTR MAIN MENU)
1. Either “¢ ¢
” or “≥
” appears in front of each item to indicate whether
the item is set to ON or OFF.
¢ ¢
:ON
≥
:OFF
2. Each time the JOG dial button is pressed, the setting moves in
the following sequence:
7
AUTO:The NEAR END voltage value preset in each battery
is used.
MANUAL:The NEAR END voltage setting for each battery can
be changed.
7
7
Item movement
NEAR END voltage setting
AUTO/MANUAL setting
ON/OFF setting
BATTERY SETTING screen
The type of battery to...

98

The frequency characteristics in the MIC LOWCUT ON mode are
200 Hz to 10 kHz.
Setting menu screens (VTR MAIN MENU)
The underlining in the variable range column indicates the setting in the preset mode.
ItemVariable
rangeRemarksVF
display
SAVE LEDSAVE&TAPESAVEUSER
ENGFor setting the operation
of the SAVE lamp.
SAVE:
This lights when the VTR
SAVE/STBY switch has
been set to SAVE.
It goes off during
recording.
SAVE&TAPE:
This lights when the VTR
SAVE/STBY switch has
been set to SAVE.
It goes off during...

99
Setting menu screens (VTR MAIN MENU)
MIC/AUDIO screen
The MIC/AUDIO settings are performed on this
screen.
ItemVariable
rangeRemarksVF
displayItemVariable
rangeRemarksVF
display
MIC LOWCUT
CH2FRONT
REAR
F&R
OFFUSER
ENGFor setting the high-pass
filter for the CH2 mic input.
FRONT:The high-pass filter
for the front mic
input is set to ON.
REAR:The high-pass filter
for the rear mic
input is set to ON.
F&R:The high-pass
filters for both the
front and rear mic
inputs are set to
ON.
OFF:The high-pass...