Panasonic Aj-D950 Aj-Pd950 Operating Instructions Manual

Ð 12 Ð
Controls and their functions (continued)

#8Time code buttons
These are used to set the TC or UB value.
SHIFT:When setting the TC or UB value, first press this button to stop the data running.
Change the digit now flashing on the display.
Each time the button is pressed, the flashing moves to the right by one digit, and
when it reaches the right-most digit, it returns to the left-most digit.
When it is kept depressed, the flashing moves consecutively.
ADJ:This is used to change the numeral of the...

Ð 13 Ð

$7Volume control
This is used to adjust the headphones volume and the monitor output volume.
Whether the headphones output and monitor output volumes are to be linked or kept
separate can be set on the setup menu No. 713 (MONI OUT). (Note that the headphones
output volume is normally linked.)
When the volumes are kept separate, the monitor output is set to the unity value (preset
value).
$8MONITOR SELECT switches
These are used to select the audio signals output to the monitor L/R channels.
Each...

Ð 14 Ð
Controls and their functions (continued)

%0VIDEO IN LEVEL control and switch
These are used to adjust the video input level.
PRESET:When the switch is set to ÒPRESETÓ, the video input level is set to the unity
value (0 dB).
MANUAL:When the switch is set to ÒMANUALÓ, the video input level can be adjusted
using this control.
%1VIDEO OUT LEVEL control and switch
When setup menu No. 00 (ENCODER SEL) is set to ÒLOCALÓ, the video output level can
be adjusted.
When the switch is set to ÒPRESETÓ, the...

Ð 15 Ð

%7REC INHIBIT switch
This is used to inhibit or allow recordings on the video cassette tape.
ON:Recording on the tape is inhibited. At this setting, the REC INHIBIT lamp in the front
panel lights.
OFF:Recording on the tape is allowed provided that the accidental erasure prevention
tab on the video cassette tape enables recording to be conducted.
%8TV SYSTEM selector switch
This selects the type of television system. The setting of this switch takes effect when the
power is turned off and then...

Ð 16 Ð
1 DIGITAL
PARALLELRS-232C ENCODER REMOTEREMOTE OUTREMOTE IN/OUT
ON YANALOG REMOTE
CUE
IN TC
IN
P
  B
P
  ROFF
75W
ON
VIDEO OUTVIDEO
IN
REF VIDEO
IN
OFF75W
PUSH
2
3
SERIAL OUT SERIAL IN
CH 1/2 CH 3/4
CH 1/2 CH 3/4
AUDIO IN
Y1
2
3 P
  B
P
  R CH2 CH1 ~AC IN
SIGNAL
GNDPUSH
CH3 CH4 CH2 CH1 CH3 CH4
AUDIO
OUTAUDIO
IN
MON
L
OUT OUT R
OUTSDTI
IN
ANALOG
AUDIO OUT
e!1 ro
ut!2 !3 !4 @0 r
@1
!5
@2 @3
!6 !7 !8 !9 q
w!0yi
Controls and their functions
Connector area 

Ð 17 Ð

qAC IN connector
This is for connecting the unit to the power outlet using the power cord provided.
wSIGNAL GND terminal
This terminal is connected to the signal ground terminal of the connected unit in order to
reduce noise. It is not connected to ground for safety purposes.
eFuse holder
This contains a fuse.
rFan motor
This is for cooling the unit.
The W lamp lights when trouble has caused the fan motor to stop. If the unit is still
operated in the warning status, the temperature inside the...

Ð 18 Ð
* Applies only to
AJ-PD950.
Controls and their functions (continued)

!6ANALOG COMPONENT VIDEO OUT connector
The analog component video signal is output from this connector.
!7ANALOG COMPOSITE VIDEO OUT connectors
The analog composite video signals are output from these connectors.
The video signal with signals superimposed on it can be output from the VIDEO OUT3
connector.
The superimpose function can be set ON or OFF on the setup menu No. 007 (SUPER).
!8DIGITAL AUDIO IN/OUT connector
This I/O...

Ð 19 Ð
1 DIGITAL
PARALLELRS-232C ENCODER REMOTEREMOTE OUTREMOTE IN/OUT
ON YANALOG REMOTE
CUE
IN TC
IN
P
  B
P
  ROFF
75W
ON
VIDEO OUTVIDEO
INREF VIDEO
IN
OFF75W
PUSH
2
3
SERIAL OUT SERIAL IN
CH 1/2 CH 3/4
CH 1/2 CH 3/4
AUDIO IN
Y1
2
3 P
  B
P
  R CH2 CH1 ~AC IN
SIGNAL
GNDPUSH
CH3 CH4 CH2 CH1 CH3 CH4
AUDIO
IN
AUDIO
OUT
OUT OUTOUTSDTI
IN
ANALOG
AUDIO OUT
MON
L
R
Analog audio input connectorsAnalog video input connectors
Reference input connectors
Digital audio/video
input connector
Digital audio/video...

Ð 20 Ð
Remote control signal (9P)
Recorder
Source machineTo audio monitor
device
To video
monitor device
Digital video/audio signalTo video
monitor
device
Digital audio
Analog video signal (component)
Reference Signal generator
OFF ON
To audio monitor
device
1 DIGITAL
PARALLELRS-232C ENCODER REMOTEREMOTE OUTREMOTE IN/OUT
ON YANALOG REMOTE
CUE
IN TC
IN
P
  B
P
  ROFF
75W
ON
VIDEO OUTVIDEO
INREF VIDEO
IN
OFF75W
PUSH
2
3
SERIAL OUT SERIAL IN
CH 1/2 CH 3/4
CH 1/2 CH 3/4
AUDIO IN
Y1
2
3 P
  B
P
  R CH2 CH1...

Ð 21 Ð
Audio monitor
signals
Recorder
AV monitor
AV monitorAV monitor
AV monitor
Video monitor
signals
Audio monitor
signalsVideo monitor
signals
Audio monitor signals
Video monitor signals
Editing controller
AV switcherReference
signal generator
Remote
To REMOTE IN/OUT
connector
To REMOTE
IN/OUT connector
Remote
Video input signals
Audio input signals
Video monitor signals
Audio monitor
signals
Reference signal Audio output signals Video output signals
RemoteAudio output
signals Video output signals...