Panasonic Aj D92 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Aj D92 Operating Instructions Manual. The Panasonic manuals for Cassette Player are available online for free. You can easily download all the documents as PDF.
Page 41
41 Setup (Initial Settings) Set the MENU switch to the ON position. The unit is now set to the menu setting mode, and the menu screen appears on the video monitor.1 Press the RESET button. The unit is set to the default setting mode, and the default setting screen appears on the video monitor.2 Press the MENU-UP button or MENU-DOWN button to move the cursor to the LOAD position, and press the SET button. The unit is set to the LOAD mode, and the load screen appears on the video monitor.3 SELECT MODE 0...
Page 42
42 How to load the user settings Set the MENU switch to the SET position. The unit is now set to the menu setting mode, and the menu screen appears on the video monitor.1 Press the RESET button. The unit is set to the default setting mode, and the default setting screen appears on the video monitor.2 Press the MENU-UP button or MENU-DOWN button to move the cursor to the LOAD position, and press the SET button. The unit is set to the LOAD mode, and the load screen appears on the video monitor.3 SELECT...
Page 43
43 Setup (Initial Settings) How to protect the menus Set the MENU switch to the SET position. The unit is now set to the menu setting mode, and the menu screen appears on the video monitor.1 Opening the setup menus can be prevented even when the MENU switch on the front panel is set to the SET position by setting the unit to the menu protect mode. Press the RESET button. The unit is set to the default setting mode, and the default setting screen appears on the video monitor. 2 3 SELECT MODE 0 ESCAPE 1...
Page 44
44 How to display the DIAG menu Set the MENU switch to the ON position while holding down the EJECT button. The unit is set to the diagnosis display mode, and “HOURS METER” appears on the video monitor.1 Any item with “r” can be reset when servicing is performed.DIAG–MENU HOURS METER Ser H00 OPERATION 00000H H01 DRUM RUN 00000H H02 TAPE RUN 00000H H03 THREADING 00000T H11 DRUM RUN r 00000H H12 TAPE RUN r 00000H H13 THREADING r 00000T END While the hours meters screen is displayed, press the MENU-UP...
Page 45
45 If the PAGE button and DATA+ button or DATA– button are pressed when the CHARA H-POS or CHARA V-POS item has been set, the counter display appears temporarily while these buttons are held down to enable the setting to be checked. Even while the PAGE button is pressed, the settings can be performed using the DATA+ button or DATA– button while the actual status is checked. 000 KEY-INH SEL 0000 0001 0002DIS ST&EJENAFor setting the switches which can still be operated on the front panel when the KEY...
Page 46
46 100 SEARCH SPEED 0000 0001X4.1X8.4For setting the speed at which the tape is to be decelerated when the search switch on the front panel has been pressed. 0: 4.1a normal tape speed 1: 8.4a normal tape speed 101 SHTL MAX 0000 0001 0002 X8.4 X16 X32 For setting the maximum speed in the shuttle mode when the external controller connected to the 9-pin remote connector is used. 0: 8.4a normal tape speed 1: 16a normal tape speed 2: 32a normal tape speed 105 STOP MODE 0000 0001RECPBFor setting the mode of...
Page 47
47 Setup Menus 131 LIGHT SET UP 0000 0001OFFONFor setting whether LCD backlight illumination status is to be stored in the memory when the power is switched off. 0: Status is not stored. When the power is turned back on, the backlight illumination will always be off. 1: Status is stored. 132 26PIN REC 0000 0001 ALL REC-P OPERATION menu Item Setting No.Superimposed displayNo.Superimposed displayDescription of setting The underlining indicates the factory setting. 130 NO-VIDEO REC 0000 0001OFFONFor...
Page 48
48 400 STILL TIMER 0000 0001 0002 0003 0004 0005 0006 0007 00080.5S 5S 10S 20S 30S 40S 50S 1min 2minFor setting the time taken until the tape protection mode is established when the unit has been left standing in the stop or still mode. (Unit: S = seconds, min = minutes) 401 SRC PROTECT 0000 0001STEPHALFFor setting the tape protection mode operation when the unit has been left standing in the still mode. 0: STEP FWD 1: STANDBY OFF (HALF LOADING) If STEP FWD has been selected, the unit is automatically...
Page 49
49 509 TCG CF FLAG 0000 0001OFFONFor setting whether to add the CF flag of the TCG to the CF bit (color frame bit) of the TCG. 0: CF flag is not added. (LTC CF bit: 0) 1: CF flag is added. (LTC CF bit: 1) 510 DF MODE 0000 0001DFNDFFor setting the TCG drop frame mode. 0: The unit is used in the drop frame mode. 1: The unit is used in the non-drop frame mode. 530 UB MODE 0000 0001 0002 0003USERTIME DATE EXTFor setting the mode in which the user’s bit is used. 0: The user’s bit is used for the user...
Page 50
50 601 V-MUTE SEL 0000 0001 N-MUTE LOW RF For setting whether to mute the video signals when LOW RF or NO RF has occurred during playback. 0: The video signals are not muted (the picture is frozen). 1: The video signal picture is muted (the screen turns gray). VIDEO menu Item Setting No.Superimposed displayNo.Superimposed displayDescription of setting The underlining indicates the factory setting. Setup Menus 608 SET UP 25. .For setting the setup processing for the composite IN/OUT and component IN...