Panasonic Aj D810a Operating Instructions Manual
Here you can view all the pages of manual Panasonic Aj D810a Operating Instructions Manual. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 131
– 131 – Item READ SELECT WRITE SELECT CARD CONFIG READ USER DATA Variable range —— 1 (fixed) —— 1 (fixed) —— —— Remarks This loads (reads) the data from the setup card. This item is always set to “1”. [It cannot be used when the Picture Link adaptor board (AJ-YAP900, optional accessory) has not been installed.] This saves (writes) the camera’s data onto the setup card. This item is always set to “1”. [It cannot be used when the Picture Link adaptor board (AJ-YAP900, optional accessory) has not been...
Page 132
– 132 – Item ID READ/WRITE MENU-1/4 LEVEL R/W MENU-1/4 SW (È) R/W MENU-2/4 ALL R/W MENU-3/4 ALL R/W Variable range ON OFF ON OFF ON OFF ON OFF ON OFF Remarks This selects ON or OFF for recording and loading the camera ID during setup card read/write operations. (See F) ON:Recording/loading is enabled. OFF:Recording/loading is disabled. This selects ON or OFF for recording and loading the adjustments made with the LEVEL item on MAIN menu screen 1 of 4 during setup card read/ write operations....
Page 133
– 133 – MAIN Menu Screen 3 of 4 (SUB menus) REC (ASPECT)/PB/RET screen The recording, playback and return functions are set on this screen. Item REC SIGNAL RET SW Variable range CAM VIDEO REC CHECK CAM RET MARKF Remarks This selects the video input signals. CAM:Signals input from the camera. VIDEO:Signals input from the GENLOCK IN connector. FEven when VIDEO has been selected as the REC.SIGNAL item setting, the setting will revert to CAM when the power is turned off and then turned back on. This selects...
Page 134
– 134 – Item FRONT POWER FRONT MIC REAR MIC CH1 REAR MIC CH2 LINE CH1/CH2 REAR AUDIO MIC LOWCUT CH1 MIC LOWCUT CH2 Variable range ON OFF p40/p50/60 dB p40/p50/ p60 dB p40/p50/ p60 dB o4/0/p6 dB STEREO MONO FRONT REAR F&R OFF FRONT REAR F&R OFF Remarks ON:The phantom power is supplied to the front microphone. OFF:The phantom power is not supplied to the front microphone. This selects the camera mic input level. This selects the mic level of the rear AUDIO CH1 input jack. This selects the mic level of the...
Page 135
– 135 – Remarks This selects ON or OFF for the emphasis during recording. The EE output signals are also linked with the setting of this switch. This selects ON or OFF for the audio limiter. ON:The audio limiter will be activated. OFF:The audio limiter will not be activated. NORMAL:The test tone signal is output when the CAM/BAR switch is set to BAR and the AUDIO IN switch CH1 is set to FRONT. ALWAYS:The test tone signal is output when the CAM/BAR switch is set to BAR. CHSEL:The test tone signal is...
Page 136
– 136 – Item GENLOCK H PHASE COARSE H PHASE FINE SC PHASE COARSE SC PHASE FINE A.IRIS LEVEL A.IRIS PEAK/ AVE A.IRIS MODE S.IRIS LEVEL Variable range EXT INT 0 . . . 7 . . . 15 0 . . . 128 . . . 255 0 . . . 3 0 . . . 128 . . . 255 0 . . . 50 . . . 100 0 . . . 50 . . . 100 NORM1 NORM2 CENTR 0 . . . 100 Remarks This sets the cyclical signal of the camera signal. INT:Synchronization with the internal reference signals that are not related to the reference signals input to...
Page 137
– 137 – L ENS AD J{ AD J AD J F2.8 F16¢ | SE L / : OF F : OF F T I ME / DATE YEAR: : : : :99 MONTH 0 1 DAY 0 1 HOUR 0 0 MI NUTE 00 T I ME / DATE È SET{ ¢ |{ VIDEO VIDEOOU T OU T S E L: :ENC CHARACT ER ON¢ |Item VIDEO OUT SEL CHARACTER Variable range MONI ENC ON OFF Remarks This selects whether to switch the VIDEO OUT signals to monitor signals or to the encoder signals. This selects whether to display characters in the VIDEO OUT signals. ON:Characters are displayed. OFF:Characters are not displayed. VF...
Page 138
– 138 – {USER MENU SE L 1 / 3 EROP. . . . . . . . .MA T R I X LOWSET T I NG SET T I NG SET T I NG SET T I NG MI D HIGH ADDITIONAL DTL DT L SK I N TONE KNEE / L EVE L F L A R E / GAMMA CAMERA ¢ | MAIN Menu Screen 4 of 4 (SUB menus) USER MENU SEL 1 of 3 screen The menu page displays are set to ON or OFF on this screen. Before each screen item is an asterisk (“E”) or dot (“.”) which respectively indicates whether the setting is ON or OFF. Item ROP MATRIX LOW SETTING MID SETTING HIGH SETTING ADDITIONAL DTL...
Page 139
– 139 – CAMERA CAMERA EVF VFD I SPLAYEINDICATOREID.SHUT TER SPEEDES YNCHROSCAN.!LED.SWMO D E.SUPER GA I N.V T R F UNC T I ON.BAT T / TAPE A L ARM{ USER MENU SE L 2 / 3 ¢ |Item VF DISPLAY VF INDICATOR CAMERA ID SHUTTER SPEED SYNCHRO SCAN !LED CAMERA SW MODE SUPER GAIN VTR FUNCTION BATT/TAPE ALARM Variable range ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF Remarks This selects ON or OFF for the user menu display of the VF DISPLAY item. This selects ON or OFF for the user menu...
Page 140
– 140 – ECARD R CARD READ /W/WRI TE. E . . . . .SE L SE LECT MIC/AUDIO GENLOCK/ IRIS VIDEO OUT TIME/D / ATE L ENS AD J{ USER MENU SE L 3 / 3 ¢ | REC( SIGNAL) /RETItem CARD READ/ WRITE CARD R/W SELECT REC (SIGNAL)/ RET MIC/AUDIO GENLOCK/IRIS VIDEO OUT TIME/DATE LENS SEL/ADJ Variable range ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF Remarks This selects ON or OFF for the user menu display of the CARD READ/ WRITE item. This selects ON or OFF for the user menu display of the CARD R/W SELECT...