Panasonic Aj D610wa Operating Instructions Manual

– 121 –
MAIN Menu Screen 2 of 4 (SUB menus)
VF DISPLAY screen
What information is to be displayed inside the viewfinder is set on this screen.
Item
DISP
CONDITION
DISP MODE
SAFETY ZONE
CENTER MARK
VF OUT
VF DTL
Variable
range
NORMAL
SPECIAL
1-3
OFF-3-9
ON
OFF
Y
NAM
R
G
B
0
 .
 .
 .
2
 .
 .
 .
4
Remarks
NORMAL:The statuses are displayed
at all times.
SPECIAL:The statuses are displayed
only when the MODE CHECK switch is
at ON.
This selects ON or OFF for the safety
zone selection display.
1:80%, 90% corner...

– 122 –
MAIN Menu Screen 2 of 4 (SUB menus)
Remarks
This sets the ZEBRA1 detection level
(IRE value).
This sets the ZEBRA2 detection level
(IRE value).
This selects ON or OFF for ZEBRA2
and for setting SPOT.
FThe ZEBRA2 DETECT level should be set
higher than the ZEBRA1 detect level when
the SPOT setting is to be used. If it is set
lower, ZEBRA will not be displayed.
This selects the setting at which LOW
LIGHT is to be displayed when the
quantity of light entering the camera is
too low.
VF
display
USER...

– 123 –
Item
EXTENDER
SHUTTER
TAPE
BATTERY
FILTER
WHITE
GAIN
LEVEL METER
IRIS
CAMERA ID
Variable
range
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
CH1
CH1Q
CH2
OFF
IRIS
SoIRIS
S
OFF
ON
OFF
Remarks
This selects ON or OFF for the
extender display.
This selects ON or OFF for the shutter
speed display.
This selects ON or OFF for the
remaining tape length display.
This selects ON or OFF for the battery
voltage display.
This selects ON or OFF for the filter
No. display.
This selects ON or OFF for the AWB...

– 124 –
MAIN Menu Screen 2 of 4 (SUB menus)
CAMERA ID screen
The camera ID settings are performed on this screen. Each time the UP button is pressed, the character display changes in the
following order: space (Å)>english letters (A to Z)>numbers (0 to 9)>symbols (space, >, 

– 125 –
Item
GAIN (0 dB)
GAIN (p3 dB)
SHUTTER
WHITE PRESET
EXTENDER
FILTER
SUPER V
Variable
range
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Remarks
This selects whether the LED is to light
up when the gain has a value other
than 0 dB.
This selects whether the LED is to light
up when the gain has a value other
than p32 dB.
This selects whether the LED is to light
up when the shutter is ON.
This selects whether the LED is to light
up when the AWB CH is PRESET.
This selects whether the LED is to...

– 126 –
Item
SUPER V
FILTER INH
SHOCKLESS
AWB
COLOR BAR
S.GAIN OFF
S.IRIS/
S.BLK SW
S.BLK LVL
ECU DATA SAVE
Variable
range
FRM1
FRM2
ON
OFF
OFF
NORMAL
SLOW
FAST
SMPTE
SNG
S.GAIN
L/M/H
S.IRIS
S.BLK
INH
p10
p20
p30
ON
OFF
Remarks
This selects ON or OFF for SUPER V.
FRM1:Normal mode
FRM2:Residual image reduction
mode
This switches whether the AWB
memory (A and B channels) data is to
be stored for each filter.
ON:The data is stored in the A and B
channel memories (2 memory units)
only regardless of the...

– 127 –
Item
30 dB
36 dB
Variable
range
ON
OFF
ON
OFF
Remarks
This selects the gain when the SUPER
GAIN switch is pressed.
This selects the gain when the SUPER
GAIN switch is pressed.
VF
display
ENG
ENG
MAIN Menu Screen 2 of 4 (SUB menus)
SUPER GAIN screen
The super gain values to be allocated to the SUPER GAIN switch are set on this screen.
|Note{
ÁEach time the SUPER GAIN switch is pressed when all the super gain values have
been allocated, the gain is switched by one level in the following sequence:...

– 128 –
Item
HUMID OPE
26P CONTROL
REC START
TC MODE
UB MODE
PAUSE TIMER
BATTERY SEL
Variable
range
ON
OFF
OFF
BOTH
ON
ALL
NORMAL
DF
NDF
USER
DATE
TIME
EXT
GPSF
10
20
30
60
NiCd12
NiCd13
NiCd14
IDXL-40
L-60
L-90
ANTON-
D
IDX-D
Remarks
This selects the VTR operation when
condensation has formed.
ON:Operation continues as usual.
OFF:All operations are disabled
except for the POWER switch and
EJECT button.
This selects 26P remote control.
OFF:Unit only (no 26P control).
BOTH:Unit and 26P remote control...

– 129 –
Item
TCG VF DISP
TCG SET HOLD
FIRST REC TC
Variable
range
ON
OFF
ON
OFF
REGEN
PRESET
VF
display
ENG
ENG
ENG
Remarks
This selects ON or OFF for time code
display in the viewfinder.
ON:The time code is displayed.
OFF:The time code is not displayed.
This selects the TCG operation when
operation is performed in the following
sequence: TCG SET>power
OFF>power ON>REC.
ON:The fact that TCG SET has been
selected is stored in the memory when
the power is switched off, and
regeneration is not performed....

– 130 –
Item
BATT NEAR END
BATT END
TAPE NEAR
END
TAPE END
Variable
range
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Remarks
This selects ON or OFF for the
warning beeps heard when the battery
charge is nearly depleted.
This selects ON or OFF for the
warning beeps heard when the battery
charge is depleted.
This selects ON or OFF for the
warning beeps heard when the tape
nears the end. (A warning is given
about 3 minutes before the tape
reaches its end.)
This selects ON or OFF for the
warning beeps heard when the tape...