Panasonic Aj D455 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Aj D455 Operating Instructions Manual. The Panasonic manuals for Cassette Player are available online for free. You can easily download all the documents as PDF.
Page 31
31 USER menu Item Setting No.SuperimposedNo.SuperimposedDescription display display 500 VITC 0000 10L .. .. POS-1.. 0006 16L .. .. .. 0010 20L 501 VITC 0000 10L .. .. POS-2.. 0008 18L .. .. .. 0010 20L 502 VITC 0000 BLANK BLANK 0001 THRU 503 TCG0000TC&UB REGEN 0001 TC 0002 UB 504 REGEN0000 OFF MODE 0001 ON 505 EXT TC0000 LTC SEL 0001 VITC 506 BINARY0000 000 GP 0001 001 0002 010 0003 011 0004 100 0005 101 0006 110 0007 111 507 PHASE0000 OFF CORR 0001 ON 508 TCG CF0000...
Page 32
32 Setup menus USER menu (continued) Item Setting No.SuperimposedNo.SuperimposedDescription display display 509 DF MODE0000 DF 0001 NDF 510 RUN MODE0000 REC 0001 FREE 511 TC OUT0000V OUT REF 0001 TC_ IN 512 VITC OUT0000 SBC 0001 VAUX The underline on the setting item denotes the initial setting. SBC (Sub Code Data) area This area exists independently from the video and audio data areas on the helical track, and it contains the time code which complies with the SMPTE/EBU standard. As with the...
Page 33
33 USER menu Item Setting No.SuperimposedNo.SuperimposedDescription display display 600 PB/PR0000 MII IN LV0001 B-CAM 601 INT SG0000 OFF 0001 BB 0002 CB 602 INPUT 0000 B/W C KILL 0001 AUTO 603 OUT0000 N-VF VSYNC 0001 VF 604 V-MUTE 0000 N-MUTE SEL 0001 LOW_ RF 605 CC (F1) 0000 BLANK BLANK 0001 THRU 606 CC (F2) 0000 BLANK BLANK 0001 THRU 608 FREEZE0000 FIELD SEL 0001 FRAME 611 EDH 0000 OFF 0001 ON The underline on the setting item denotes the initial setting. This selects the...
Page 34
34 Setup menus USER menu (continued) Item Setting No.SuperimposedNo.SuperimposedDescription display display 612 WIDE0000 AUTO SELECT 0001 WIDE 0002 NORMAL 613 VIN SETUP 0000 THRU 0001 CUT 620 Pb/Pr OUT 0000 MII LV0001B-CAM The underline on the setting item denotes the initial setting. This selects the operation to be conducted in response to the WIDE information. 0: During recording, if the S1-VIDEO input signals contain WIDE information, the WIDE information is recorded on the tape. During...
Page 35
35 USER menu Item Setting No.SuperimposedNo.SuperimposedDescription display display 700 CH1 IN 0000 4dB LV 0001 0dB 0002 –20dB 0003 –60dB 701 CH2 IN 0000 4dB LV 0001 0dB 0002 –20dB 0003 –60dB 703 CH1 OUT 0000 4dB LV 0001 0dB 0002 –20dB 704 CH2 OUT 0000 4dB LV 0001 0dB 0002 –20dB 714 REC CH10000 CH1 0001 CH2 0002 CH1+2 715 REC CH2 0000 CH1 0001 CH2 0002 CH1+2 716 REC CUE0000 CH1 0001 CH2 0002 CH1+2 718 DV0000 ST1 OUTPUT 0001 ST2 0002 ST1+2 719 PB...
Page 36
36 Setup menus USER menu (continued) Item Setting No.SuperimposedNo.SuperimposedDescription display display 720 EMBEDDED 0000 OFF AUD 0001 ON 721 LINE CH0000PCM SEL 0001 AUTO 722 INT SG0000 OFF 0001 ON 723 DV PB ATT0000 OFF 0001 ON 729 REC PT0000 OFF MUTE 0001 ON 731 REF LEVEL0000 FS-20 0001 FS-18 0002 FS-12 The underline on the setting item denotes the initial setting. This selects whether to superimpose the audio data onto the serial output. 0: Data is not superimposed. 1: Data is...
Page 37
37 USER menu Item Setting No.SuperimposedNo.SuperimposedDescription display display A00 LOAD0000USER2 0001 USER3 0002 USER4 0003 USER5 A01 SAVE0000USER2 0001 USER3 0002 USER4 0003 USER5 0004 LOCKED A02 P.ON LOAD0000 OFF 0001 USER2 0002 USER3 0003 USER4 0004 USER5 A03 MENU LOCK0000 OFF 0001 ON The underline on the setting item denotes the initial setting. • No. A00 (LOAD), No. A01 (SAVE) and No. A02 (P.ON LOAD) are the menu items which can be set only for USER1. They are not displayed with the...
Page 38
38 Time code/user bit Time code The time code is used when the time code signal generated by the time code generator (time code signal generator) is to be recorded on the tape, its values are to be read by the time code reader (time code signal reader), and the absolute position of the tape is to be displayed in increments of hours, minutes, seconds and frames. The time code is written in the sub-code area (data area) of the helical track. This enables insert editing to be conducted independently using...
Page 39
39 Recording internal/external time codes 1. Setting the internal time code 1Place the VTR in the stop mode. 2Press the CTL/TC/UB/REMAIN button until TC is selected. 3Set the TC INT/EXT switch to INT. (Internal time code selected) 4Set the RUN MODE. (setup menu No. 510) REC (RUN):The time code runs at the same time as the recording proceeds. FREE (RUN):The time code runs in the same way as the time regardless of the VTR’s operation. 5Set the REGEN MODE. (setup menu No. 504) ON (REGEN):Continuity is...
Page 40
40 Reproducing the time code/user bit 1 Place the unit in the stop mode. 2Press the CTL/TC/UB/REMAIN button until TC or UB is selected. TC:The time code is displayed. UB:The user bit is displayed. •When it is no longer possible to read the time code, it is interpolated using the CTL signal. 3Press the PLAY button. Playback now commences, and the time code appears on the display. If the SUPER ON/OFF switch is at ON, the time code value is superimposed onto the video signals which are output from the VIDEO...