Panasonic Agvp300 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Agvp300 Operating Instructions Manual. The Panasonic manuals for DVD Player are available online for free. You can easily download all the documents as PDF.
Page 51
51 DVD Changing settings (continued) Entering a password (Ratings) [DVD-V] While SET UP menus are displayed, select the “Disc” tab and then “Ratings” by following “Common procedures” (lpage 48, 49) to set a ratings level to limit DVD-Video play. The password screen is shown when you select levels 0 to 7 (lpage 49). 1) Input a 4-digit password with the numeric buttons and press [ENTER]. ≥If you enter a wrong number, press [CANCEL/RESET] to erase it before you press [ENTER]. ≥The lock symbol appears...
Page 52
52 Editing Assemble Editing This function can be used to make up an edited tape from other recordings or video sources. A new scene can be added to the end of previous one. Preparations ≥Connect a camera or another VCR to this unit as shown. ≥Confirm that the TV is on and the unit viewing channel is selected. ≥Switch [VCR/TV/DVD] to “VCR”. ≥Insert a recorded cassette tape with an intact erasure prevention tab. ≥Select the audio source required by using [CH]IJ to set A1 or A2. Operations 1Search for...
Page 53
53 Others Editing (continued) Adding Music to Video (MUSIC WITH PICTURE) You can enjoy music fed from a disc while images taken by digital cameras or video cameras are being played. The video and music being played can be recorded on a video cassette. Preparations ≥Connect a camera to this unit as shown. ≥Confirm that the TV is on and the unit viewing channel is selected. ≥Insert the disc containing the music to be played with images. (lpage 32) ≥If you wish to record the images and music onto a...
Page 54
54 Error Messages Before requesting service, check the following points once again. On Screen Display ªVCR ªDVD Self-diagnostic Indications This unit has a self-diagnosis and display function. If this unit detects trouble during installation or during use, the following indications automatically appear in the unit’s display. Indications are in the form of a single English letter plus two numbers, such as [H01]. ªVCR ªDVD PLEASE PUT IN A VIDEO CASSETTE.≥[REC¥] (¥REC/OTR) or [TIMER ] ( TIMER REC) has...
Page 55
55 Helpful Hints Before Requesting Service Before requesting service, check the following points once again. General Sound No power.≥Insert the AC power supply cord and system cable securely.12 No response when buttons pressed.≥Some operations may be prohibited by the disc. ≥The unit may not be operating properly due to lightning, static electricity or some other external factor. Reset procedure: Press [POWERÍ/I] (VCR/DVDÍ) to switch the unit to the standby mode and then back to ON. Alternatively,...
Page 56
56 Before Requesting Service (continued) Picture VCR picture Disc picture Recording No picture.≥Check the connection. ≥Make sure the television is on. ≥Ensure the television’s video input setting is correct. When the audio/video cable is connected, Ensure the input is switched on the TV. (e.g. Video 1) When the audio/video cable is not connected, Ensure the video exclusive channel (e.g. Channel 3 or Channel 4) is selected. Also adjust Channel 3 or Channel 4 on the TV. (Also refer to the instructions for...
Page 57
57 Helpful Hints Before Requesting Service (continued) Disc play Editing Play doesn’t start (or stops immediately) when you press [1] (PLAY). ≥Condensation has formed: Wait 1 to 2 hours for it to evaporate. ≥This unit cannot play discs other than the ones listed in these operating instructions. ≥This unit cannot play DVD-Video with a region number other than “1”, “ALL” or multiple region numbers including “1”. ≥The disc may be dirty and may require cleaning. ≥Ensure that the disc is installed with the...
Page 58
58 Glossary Audio channel for DVD (ch) Sound is divided into channels based on the sound’s role. Example: 5.1 channel ≥Front speakers— 1 left channel and 1 right channel ≥ Center speaker— 1 channel ≥ Surround speakers— 1 left channel and 1 right channel ≥Subwoofer— 1 channel a0.1 (the ratio of bass to the total amount of sound output) The following are indicated on the On-Screen Menu Icons. Example:3 /2 .1ch .1: Subwoofer signal (not displayed if there is no subwoofer signal) 0: No surround 1:...
Page 59
59 Helpful Hints Glossary (continued) MP3 (MPEG AUDIO Layer3 ) One of audio data compression methods adopted by MPEG. The audio data can be compressed into approx. 1/10 with only slight degradation of sound quality. Multi-session This means recording data onto a CD-R/CD-RW disc several times. “Read-in/Program area/Read-out” of the data on a disc makes one session. If data, such as music is added onto a pre-recorded CD-R/RW disc, a new session will be added. Such a disc is referred to as a...
Page 60
60 Q&A Connection I have a TV equipped with both the S-video input and the component video inputs. Which one should be used? ≥To view only the video on the DVD section, it is recommended to connect to the component video inputs. (lpage 13) The component video inputs allow the signals on a DVD to be output as they were recorded and reproduce colors with higher fidelity than using the S-video input terminal. However, this connection does not output the video on the VCR. To view the video on the VCR,...