Panasonic Admin Console Wj Mpu955 Users Guide

Appendix A 
 
 
116 
 DIGITAL SYSTEM SETUP 
Field Data 
NTP Port No. Description: Specifies a NTP server port number. 
Validation: hexadecimal numeral 0000 -FFFF 
Default Setting: (None) 
NTP Time Interval Description: Specifies a NTP sequence time in hex format. The time unit is in hours. 
Validation: hexadecimal numeral 01 - 18 
Default Setting: 1 
Host Name Description: Specifies a host name of the device. It is a string up to 64 characters. 
Validation: Within 64 characters. 
Default Setting: (None)...

Appendix A 
 
 
117 
 ENCODER 
Field Data 
Port Description: Specifies a local control port for the device. 
Validation: decimal format, 1 - 1024 
Default Setting: Automatically assigned. 
Note: This port number is the same as the port number of the CAMERA page, and it is necessary to 
associate it. 
Audio Description: Specifies the audio mode for the device. 
Validation: 0 = OFF, 1 = ON 
Default Setting: 0 
Video & Audio 
Encryption Description: Specifies the video stream classification. 
Validation: 0...

Appendix A 
 
 
118 
 ENCODER 
Field Data 
Comment Description: A string to put comment notes. 
Validation: Within 16 characters. 
Default Setting: (None) 
 
 
Decoder 
 
 DECODER 
Field Data 
Device ID Description: GX device identifier is a local physical number that is uniquely identified within a 
system domain. Its format is shown as below: 
        _ _ _ _  _ X X X  device id (by rotary SW of an decoder front panel) 
        X X X X X _ _ _   device type  
Validation: Device type [0x0F000 encode,...

Appendix A 
 
 
119 
 DECODER 
Field Data 
Background Color Description: Specifies the background color of character on the monitor. 
Validation: 0 = OFF, 1=ON 
Default Setting: 0 
Latency Buffer Description: Specifies decode buffer memory size for network latency. The Memory size is in 
Mbits 
Validation: 0, 0.5, 1, 2, 4, 8, 16, 32 
Default Setting: 0 
Comment Description: A string to put comment notes. 
Validation: Within 16 characters. 
Default Setting: (None) 
 
 
Digital Input 
 
 DIGITAL INPUT...

Appendix A 
 
 
120  Digital Output 
 
 DIGITAL OUTPUT 
Field Data 
Device ID Description: GX device identifier is a local physical number that is uniquely identified within a 
system domain. Its format is shown as below: 
        _ _ _ _  _ X X X  device id (by rotary SW of an encoder front panel) 
        X X X X X _ _ _   device type  
Validation: Device type [0x0F000 encode, 0x1F000 decoder, other reserved] 
Default Setting: 0x0F000XXX 
XXX is the value registered in Address[SW1] of the previous page...

Appendix A 
 
 
121 
 RS485 DATA PORT 
Field Data 
Data Description: Specifies serial communication packet size. 
Validation: 5 = 5bits, 6 = 6bits, 7 = 7bits, 8 = 8bits 
Default Setting: 8 
Parity Description: Specifies serial communication parity bits. 
Validation: 0 = None, 1 = Odd, 2 = Even 
Default Setting: 0 
Stop Bit Description: Specifies serial communication stop bits. 
Validation: 1 = One bit, 2 = Two bits 
Default Setting: 1 
Mode Description: Specifies serial communication packet mode...

Appendix A 
 
 
122  Specific Notification (Currently Not Supported) 
 
This is the setup for a specific encoder or decoder that sends alarm notifications to 
another device (except MPU955). 
 
When Alarm Notification is set up, it is not necessary to change these settings.
 
 
 SPECIFIC NOTIFICATION 
Field Data 
Device ID Description: GX device identifier is a local physical number that is uniquely identified within a 
system domain. Its format is shown as below: 
        _ _ _ _  _ X X X  device id (by...

Appendix A 
 
 
123 
 SPECIFIC NOTIFICATION 
Field Data 
Alarm UDP IP 
address  Description: Specifies a destination IP address for TCP alarm notification. This setting is 
effective only when Alarm UDP Destination is 1. 
Validation: Dotted decimal format IP address - 0.0.0.0 to 255.255.255.255 
Default Setting: (None) 
Alarm UDP Port  
No. Description: Specifies a destination IP port for TCP alarm notification. This setting is effective 
only when Alarm UDP Destination is 1. 
Validation: hexadecimal...

Appendix B 
 
 
124 
Appendix B 
 
The color codes in the table below are used in the Foreground Color field of the 
Decoder details, as described on page 118. 
 
COLOR CODE COLOR CODE COLOR CODE COLOR CODE 
Aliceblue  0  Deeppink  38 Lime  76 Rosybrown  114 
Antiquewhite  1  Deepskyblue  39 Limegreen  77 Royalblue  115 
Aqua  2  Dimgray  40 Linen  78 Saddlebrown  116 
Aquamarine 3 Dodgerblue  41 Magenta  79 Salmon  117 
Azure  4  Firebrick  42 Maroon  80 Sandybrown  118 
Beige 5 Floralwhite 43...

Glossary 
 
 
125   
Glossary 
 
Acronyms 
 
CPort – camera control port 
CPreset – camera preset (preset position) 
CPU – central processing unit, part of an NSS 
CPUMS – CPU management switch 
CSG – camera surveillance group 
DVD-R – digital videodisc, recordable 
EA – Ethernet address (i.e., MAC address) 
GUI – graphical user interface 
IP – Internet protocol 
IPA – Internet protocol address 
LCPU – local CPU 
MCPU – main central processing unit, part of the NSS specified as A or B 
MSA – monitor...