Panasonic Additional Digital Cordless Handset Kx-tga935 Installation Manual

							Thank you for purchasing a Panasonic digital cordless phone.
Please read this installation manual before using the unit and 
save it for future reference.
For assistance, visit our website:
http://www.panasonic.com/help 
for customers in the U.S.A. or 
Puerto Rico.This unit is an additional handset compatible with the following 
series of Panasonic Digital Cordless Phones: 
KX-TG6311/KX-TG6321/KX-TG9331/KX-TG9341/
KX-TG9361/KX-TG9371/KX-TH1211
You must register this handset with your base unit before it can 
be used. This installation manual describes only the steps 
needed to register and begin using the handset. Please read 
the base unit’s operating instructions for further details.
Charge the batteries for about 7 hours before initial use.
Additional Digital Cordless Handset
Model No. 
KX-TGA935 Installation Manual
PNQX1009ZA  DM0108PN0
TGA935(e).fm  Page 1  Tuesday, January 15, 2008  7:47 PM 
						

							2For assistance, please visit http://www.panasonic.com/help
Supplied accessories
*1 Please read the base unit’s operating instructions for replacement 
battery information.
*2 The handset cover comes attached to the handset.
Note:
LPlease read the base unit’s operating instructions for additional/
replacement accessories.
Sales and support information
LTo order additional/replacement accessories, call 1-800-332-5368.
LTTY users (hearing or speech impaired users) can call 1-866-605-
1277.
Connection
Note:
LUse only the supplied Panasonic AC adaptor PQLV209.
LThe AC adaptor must remain connected at all times. (It is normal for 
the adaptor to feel warm during use.)
Accessory item/Order numberQuantity
Charger/PNLC1003ZB 1
AC adaptor for charger/PQLV209T 1
Rechargeable batteries
*12
Handset cover
*2/PNYNTGA936BR 1
Belt clip/PNKE1011Z1 1
(120 V AC,
 60 Hz)
Hooks
TGA935(e).fm  Page 2  Tuesday, January 15, 2008  7:47 PM 
						

							For assistance, please visit http://www.panasonic.com/help3
Battery installation and battery charge
Important:
LUse the supplied rechargeable batteries (Part No. HHR-65AAABU).
LWhen installing the batteries:
– Wipe the battery ends (S, T) with a dry cloth.
– Avoid touching the battery ends (S, T) or the unit contacts.
– Ensure correct polarities (S, T).
LWhen replacing the batteries:
– USE ONLY rechargeable Ni-MH batteries AAA (R03) size.
– Do NOT use Alkaline/Manganese/Ni-Cd batteries.
– We recommend using the Panasonic rechargeable batteries noted 
in the base unit’s operating instructions for replacement battery 
information.
1 Release the battery cover 
latch and lift the cover open.2 Insert the batteries negative 
(T) end first.
Place the handset on  
the charger for about  
7 hours before initial  
use.
5Fasten the battery  
cover latch.4Close the handset  
cover.3
TGA935(e).fm  Page 3  Tuesday, January 15, 2008  7:47 PM 
						

							4For assistance, please visit http://www.panasonic.com/help
Note:
LIf the batteries are fully charged, but the operating time seems to be 
shorter, clean the battery ends (S, T) and the charge contacts with a 
dry cloth.
Attention:
Registering a handset to a base unit
1
Base unit:
KX-TG6311/KX-TG9361/KX-TH1211
Press and hold {LOCATOR} for 4 seconds. (No registration tone)
KX-TG6321/KX-TG9331/KX-TG9341/KX-TG9371
Press and hold {LOCATOR} for 4 seconds until the registration tone 
sounds.
LIf all registered handsets start ringing, press the same button to 
stop. Then repeat this step.
LThe next step should be completed within 90 seconds.
2Handset:
Press {OK}, then wait until a long beep sounds.
Note:
LWhile registering, “Base registering” is displayed on all 
registered handsets.
LIf “Error!!” is displayed while registering, press {OFF} and register 
the handset again.A nickel metal hydride battery that is 
recyclable powers the product you 
have purchased.
Please call 1-800-8-BATTERY (1-
800-822-8837) for information on how 
to recycle this battery.
TGA935(e).fm  Page 4  Tuesday, January 15, 2008  7:47 PM 
						

							For assistance, please visit http://www.panasonic.com/help5
Display language
1
{MENU} i {#}{1}{1}{0}
2{V}/{^}: Select the desired setting.
3Press the right soft key to save. i {OFF}
Wall mounting
1
Drive the screws (not included) into the wall.
2Mount the charger (A), then slide it down (B) and to the right (C) 
until it is secure.
Belt clip
You can hang the handset on your belt or pocket using the supplied belt 
clip.
NTo attach the belt clipNTo remove the belt clip
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)A
B
C
TGA935(e).fm  Page 5  Tuesday, January 15, 2008  7:47 PM 
						

							6For assistance, please visit http://www.panasonic.com/help
For your safety
To prevent severe injury and loss of life/property, read this section 
carefully before using the product to ensure proper and safe operation of 
your product.
WARNING
Power connection
LCompletely insert the AC adaptor/power plug into the power outlet. 
Failure to do so may cause electric shock and/or excessive heat 
resulting in a fire.
LRegularly remove any dust, etc. from the AC adaptor/power plug by 
pulling it from the power outlet, then wiping with a dry cloth. 
Accumulated dust may cause an insulation defect from moisture, etc. 
resulting in a fire.
LUnplug the product from power outlets if it emits smoke, an abnormal 
smell, or makes an unusual noise. These conditions can cause fire or 
electric shock. Confirm that smoke has stopped emitting and contact 
the Panasonic Call Center at 1-800-211- PANA (1-800-211-7262).
Installation
LTo prevent the risk of fire or electrical shock, do not expose the product 
to rain or any type of moisture.
LDo not place or use this product near automatically controlled devices 
such as automatic doors and fire alarms. Radio waves emitted from 
this product may cause such devices to malfunction resulting in an 
accident.
CAUTION
Installation and relocation
LThe AC adaptor is used as the main disconnect device. Ensure that 
the AC outlet is installed near the product and is easily accessible.
TGA935(e).fm  Page 6  Tuesday, January 15, 2008  7:47 PM 
						

							For assistance, please visit http://www.panasonic.com/help7
Battery
LWe recommend using the supplied batteries or additional/replacement 
batteries noted in the base unit’s operating instructions for 
replacement battery information. USE ONLY rechargeable Ni-MH 
batteries AAA (R03) size.
LDo not mix old and new batteries.
LDo not open or mutilate the batteries. Released electrolyte from the 
batteries is corrosive and may cause burns or injury to the eyes or skin. 
The electrolyte may be toxic if swallowed.
LExercise care when handling the batteries. Do not allow conductive 
materials such as rings, bracelets or keys to touch the batteries, 
otherwise a short circuit may cause the batteries and/or the conductive 
material to overheat and cause burns.
LCharge the batteries provided with or identified for use with this 
product only, in accordance with the instructions and limitations 
specified in this manual.
LOnly use a compatible base unit (or charger) to charge the batteries. 
Do not tamper with the base unit (or charger). Failure to follow these 
instructions may cause the batteries to swell or explode.
Other information
LOperating the product near electrical appliances may cause 
interference. Move away from the electrical appliances.
LUse only the power cord and batteries indicated in this manual. Do not 
dispose of batteries in a fire. They may explode. Check with local 
codes for possible special disposal instructions.
Routine care
LWipe the outer surface of the product with a soft moist cloth.
LDo not use benzine, thinner, or any abrasive powder.
Notice for product disposal, transfer, or return 
LThis product can store your private/confidential information. To protect 
your privacy/confidentiality, we recommend that you erase the 
TGA935(e).fm  Page 7  Tuesday, January 15, 2008  7:47 PM 
						

							8For assistance, please visit http://www.panasonic.com/help
information such as phonebook or caller list entries from the memory 
before you dispose of, transfer, or return the product.
Splash resistance (handset only)
The handset is designed to be splash-resistant. You can use the handset 
with wet hands.
LDo not immerse in water or leave under running water.
LKeep the handset away from salt water.
LAvoid exposure to prolonged high humidity.
LSince water in headset jack may cause damage, close the headset 
jack cover when the optional headset is not in use. When the optional 
headset is connected, do not use the handset with wet hands.
LIf the handset is wet, wipe with a soft dry cloth.
LThe base unit/charger is not designed to be splash resistant. Do not 
place the handset on the base unit/charger if the handset is wet.
Drop resistance (handset only)
The handset is designed to be drop-resistant, however, it should not be 
thrown or stepped on.
FCC and other information
This equipment is hearing aid compatible as defined by the FCC in 47 
CFR Section 68.316.
When you hold the phone to your ear, noise might be heard in your 
Hearing Aid. Some Hearing Aids are not adequately shielded from 
external RF (radio frequency) energy. If noise occurs, use an optional 
headset accessory or the speakerphone option (if applicable) when 
using this phone. Consult with your audiologist or Hearing Aid 
manufacturer about the availability of Hearing Aids which provide 
adequate shielding to RF energy commonly emitted by digital devices.
WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING 
TEST CALLS TO EMERGENCY NUMBERS:
TGA935(e).fm  Page 8  Tuesday, January 15, 2008  7:47 PM 
						

							For assistance, please visit http://www.panasonic.com/help9
1) Remain on the line and briefly explain to the dispatcher the reason for 
the call.
2) Perform such activities in the off-peak hours, such as early morning or 
late evenings.
This device complies with Part 15 of the FCC Rules. Operation is subject 
to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may 
cause undesired operation.
Privacy of communications may not be ensured when using this phone.
CAUTION:
Any changes or modifications not expressly approved by the party 
responsible for compliance could void the user’s authority to operate this 
device.
NOTE:
This equipment has been tested and found to comply with the limits for 
a Class B digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses, 
and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to 
radio communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged 
to try to correct the interference by one or more of the following 
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
TGA935(e).fm  Page 9  Tuesday, January 15, 2008  7:47 PM 
						

							10For assistance, please visit http://www.panasonic.com/help
FCC RF Exposure Warning:
LThis product complies with FCC radiation exposure limits set forth for 
an uncontrolled environment. 
LThis handset may not be collocated or operated in conjunction with 
any other antenna or transmitter.
LThe handset may be carried and operated with only the specific 
provided belt-clip. Other non-tested belt-clips or similar body-worn 
accessories may not comply and must be avoided.
Notice
LFCC ID can be found inside the battery compartment or on the bottom 
of the unit.
Notice
LÎé-~ ê”ãÄÖâé
ö!ª
á›ãÒá.3.ÐáÅ”ãÄ
Ö]âé
ö!ªê:Þ1‘
ûãåùÔ•åÞá”°$ âêãÄÖ]æ
Å¿áê
ÚããÒáC!åäé(oF,ê)LÒÆèùÔ• L
ôr} LThis product is designed for use in the United States of America. 
Sale or use of this product in other countries may violate local laws.
LCet appareil est conçu pour être utilisé aux États-Unis d’Amérique. 
La vente  ou l’emploi de cet appareil dans certains autres pays peut 
constituer une infraction à la législation locale.
LEste producto está diseñado para usarse en los Estados Unidos de 
América. 
La venta o el empleo de este producto en ciertos países puede 
constituir violación de la legislación local.
TGA935(e).fm  Page 10  Tuesday, January 15, 2008  7:47 PM