Home
>
Panasonic
>
Telephone
>
Panasonic Additional Digital Cordless Handset Kx-tga430 Installation Manual
Panasonic Additional Digital Cordless Handset Kx-tga430 Installation Manual
Have a look at the manual Panasonic Additional Digital Cordless Handset Kx-tga430 Installation Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Thank you for purchasing a new Panasonic digital cordless phone. Please read this installation manual before using the unit and save it for future reference. For assistance, visit our website: http://www.panasonic.com/help for customers in the U.S.A. or Puerto Rico.This unit is an additional handset compatible with the following series of Panasonic Digital Cordless Phone: KX-TG4321 You must register this handset with your base unit before it can be used. This installation manual describes only the steps needed to register and begin using the handset. Please read the base unit’s operating instructions for further details. Charge the batteries for about 7 hours before initial use. 5.8 GHz Additional Digital Cordless Handset Model No. KX-TGA430 Installation Manual PNQX1002YA DC1107PW1127 TGA430(e).fm Page 1 Wednesday, December 12, 2007 5:17 PM
2For assistance, please visit http://www.panasonic.com/help Supplied accessories *1 Please read the base units operating instructions for replacement battery information. *2 The handset cover comes attached to the handset. Note: LPlease read the base unit’s operating instructions for additional/ replacement accessories. Sales and support information LTo order additional/replacement accessories, call 1-800-332-5368. LTTY users (hearing or speech impaired users) can call 1-866-605- 1277. Connection Note: LUse only the supplied Panasonic AC adaptor PQLV209. LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) Accessory item/Order numberQuantity Charger/PNLC1001ZB 1 AC adaptor for charger/PQLV209T 1 Rechargeable batteries *12 Handset cover *2/PNYNTGA430BR 1 Hooks (120 V AC, 60 Hz) TGA430(e).fm Page 2 Wednesday, December 12, 2007 5:17 PM
For assistance, please visit http://www.panasonic.com/help3 Battery installation and battery charge Important: LUse the supplied rechargeable batteries (Part No. HHR-65AAABU). LWhen installing the batteries: – Wipe the battery ends (S, T) with a dry cloth. – Avoid touching the battery ends (S, T) or the unit contacts. – Ensure correct polarities (S, T). LWhen replacing the batteries: – USE ONLY rechargeable Ni-MH batteries AAA (R03) size. – Do NOT use Alkaline/Manganese/Ni-Cd batteries. – We recommend using the Panasonic rechargeable batteries noted in the base unit’s operating instructions for replacement battery information. 1Press the notch on the handset cover firmly, and slide it in the direction of the arrow. 2Insert the batteries negative (T) end first. Close the handset cover. 3Place the handset on the charger for about 7 hours before initial use. Note: LIf the batteries are fully charged, but the operating time seems to be shorter, clean the battery ends (S, T) and the charge contacts with a dry cloth. TGA430(e).fm Page 3 Wednesday, December 12, 2007 5:17 PM
4For assistance, please visit http://www.panasonic.com/help Attention: Registering a handset to a base unit 1 Base unit: Press and hold {LOCATOR} for 4 seconds until the registration tone sounds. LIf all registered handsets start ringing, press the same button to stop. Then repeat this step. LThe next step should be completed within 90 seconds. 2Handset: Press {OK}, then wait until a long beep sounds. Note: LWhile registering, “Base registering” is displayed on all registered handsets. Display language 1 {MENU} i {#}{1}{1}{0} 2{V}/{^}: Select the desired setting. 3Press the right soft key to save. i {OFF} A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY (1- 800-822-8837) for information on how to recycle this battery. TGA430(e).fm Page 4 Wednesday, December 12, 2007 5:17 PM
For assistance, please visit http://www.panasonic.com/help5 Wall mounting 1 Drive the screws (not included) into the wall. 2Mount the charger (A), then slide it down (B) and to the right (C) until it is secure. 25.4 mm (1 inch) Screws (120 V AC, 60 Hz)A B C TGA430(e).fm Page 5 Wednesday, December 12, 2007 5:17 PM
6For assistance, please visit http://www.panasonic.com/help For your safety To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection LCompletely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. LRegularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. LUnplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact the Panasonic Call Center at 1-800-211- PANA (1-800-211-7262). Installation LTo prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. LDo not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. CAUTION Installation and relocation LThe AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. TGA430(e).fm Page 6 Wednesday, December 12, 2007 5:17 PM
For assistance, please visit http://www.panasonic.com/help7 Battery LWe recommend using the supplied batteries or additional/replacement batteries noted in the base units operating instructions for replacement battery information. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. LDo not mix old and new batteries. LDo not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. LExercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns. LCharge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual. LOnly use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode. Other information LOperating the product near electrical appliances may cause interference. Move away from the electrical appliances. LUse only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. Routine care LWipe the outer surface of the product with a soft moist cloth. LDo not use benzine, thinner, or any abrasive powder. Notice for product disposal, transfer, or return LThis product can store your private/confidential information. To protect your privacy/confidentiality, we recommend that you erase the TGA430(e).fm Page 7 Wednesday, December 12, 2007 5:17 PM
8For assistance, please visit http://www.panasonic.com/help information such as phonebook or caller list entries from the memory before you dispose of, transfer, or return the product. FCC and other information This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316. When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and briefly explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such as early morning or late evenings. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. TGA430(e).fm Page 8 Wednesday, December 12, 2007 5:17 PM
For assistance, please visit http://www.panasonic.com/help9 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Warning: LThis product complies with FCC radiation exposure limits set forth for an uncontrolled environment. LThis handset may not be collocated or operated in conjunction with any other antenna or transmitter. LFor body-worn operation, the handset must be used only with a non- metallic accessory. Use of other accessories may not ensure compliance with FCC RF exposure requirements. Notice LFCC ID can be found inside the battery compartment or on the bottom of the unit. TGA430(e).fm Page 9 Wednesday, December 12, 2007 5:17 PM
10For assistance, please visit http://www.panasonic.com/help Notice LÎé-~ ê”ãÄÖâé ö!ª á›ãÒá.3.ÐáÅ”ãÄ Ö]âé ö!ªê:Þ1‘ ûãåùÔ•åÞá”°$ âêãÄÖ]æ Å¿áê ÚããÒáC!åäé(oF,ê)LÒÆèùÔ• L ôr} LThis product is designed for use in the United States of America. Sale or use of this product in other countries may violate local laws. LCet appareil est conçu pour être utilisé aux États-Unis d’Amérique. La vente ou l’emploi de cet appareil dans certains autres pays peut constituer une infraction à la législation locale. LEste producto está diseñado para usarse en los Estados Unidos de América. La venta o el empleo de este producto en ciertos países puede constituir violación de la legislación local. TGA430(e).fm Page 10 Wednesday, December 12, 2007 5:17 PM