Panasonic Ac Adapter Aw Ps505 Operating Instructions

							AC Adapter
AW-PS505
Before attempting to connect or operate this product,
please read these instructions completely.
â 
						

							Warning:
This equipment generates and uses radio frequency ener-
gy and if not installed and used properly, i.e., in strict
accordance with the instruction manual, may cause harmful
interference to radio communications.    It has been tested
and found to comply with the limits for a Class A computing
device pursuant to Subpart J of Part 15 of FCC Rules,
which are designed to provide reasonable protection
against such interference when operated in a commercial
environment.
This digital apparatus does not exceed the Class A limits for
radio noise emissions from digital apparatus set out in the
Radio Interference Regulations of the Canadian Department
of Communications.
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOIS
TURE.
The lightning flash with arrowhead sym-
bol, within an equilateral triangle, is
intended to alert the user to the pres-
ence of uninsulated dangerous voltage
within the products enclosure that may
be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilat-
eral triangle is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the appli-
ance.The serial number of this product may be found on the bot-
tom of the unit.
You should note the serial number of this unit in the space
provided and retain this book as a permanent record of your
purchase to aid identification in the event of theft.
Model No.
Serial No.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER SER-
VICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PER-
SONNEL.
CAUTIONRISK OF ELECTRIC SHOCK
DO NOT OPEN
SA 1965
SA 1966
For U.S.A
For CANADA 
						

							CONTENTS
FEATURES ................................................................................................................................................................................... 1
PRECAUTIONS ............................................................................................................................................................................ 2
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS  ...................................................................................................... 3
CONNECTION .............................................................................................................................................................................. 5
SPECIFICATIONS ......................................................................................................................................................................... 6
ACCESORIES ................................................................................................................................................................................ 6
-1-
FEATURESThis is the AC adapter for the Multiport Hub AW-HB505. 
						

							-2-
• Handle the control panel with care.
Dropping the control panel or subjecting it to a strong
shock can cause a failure or an accident.
• Operating temperature range –10°C to +45°C
Avoid using it in a cold place below –10°C or a hot
place above +45°C because low or high temperature
will adversely affect the parts inside.
• Switch power off before power cable connection or
disconnection.
Be sure to switch power off before connecting or dis-
connecting the power cable.
• Avoid outdoor use.
• Install the control panel more than 1 meter away
from the monitors.• Care
Pull out the power cable plug, and wipe the control
panel clean with a dry cloth. If it is extremely dirty, dip
a cloth into a diluted solution of kitchen detergent,
squeeze it hard, and wipe the product surfaces care-
fully.PRECAUTIONS
• Do not use benzine, paint thinner, or other volatile
liquids.
• When using a chemical duster, carefully read the
caution notes on its use.Note 
						

							-3-
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONSnFRONT PANEL
ON
POWER
OFF
POWERO    I
FUSE(POWER)
125V  3.15A
FUSEFUSE
AC Adaptor  
AW-PS505
qPower Switch [POWER ON/OFF]
Power is switched on to supply power to the Multiport
Hub when this switch is pressed to the ON position
(POWER Indicator lights), and is switched off when the
switch is pressed to the OFF position.
wPower Indicator [POWER]
Lights red when POWER ON/OFF Switch qis pressed
to the ON position, and goes out when POWER
ON/OFF Switch qis pressed back to the OFF position.eFuse [FUSE (POWER)]
Power fuse.  Use a 125 V, 3.15 A fuse to replace it. 
						

							-4-
rAC 120V Input Connector [AC IN] (AC 3P Inlet)
Connect the supplied AC cable to it.
tDC +12V Output Connector [DC 12V OUT] 
(4P Cannon Connector)
Connect it to the DC 12V IN Connector on the Multiport
Hub with the supplied DC cable.nREAR PANEL
AC IN
DC 12V OUT 
						

							-5-
CONNECTION• Switch off all the devices before making any connection.
• Connect DC 12V OUT Connector tof this adapter to the DC +12V Input Connector on the Multiport Hub AW-HB505 with
the supplied DC cable.
• Connect the supplied AC cable to the AC 120V Inlet.  Plug the AC cable to an AC outlet, and press POWER ON/OFF
Switch qof this adapter to the ON position.
Connecting the Adapter AW-PS505 to the Multiport Hub AW-HB505.
AC IN
DC 12V OUT
AC Cable
(supplied) AC 120V
60 Hz
DC Cable
(supplied) Multiport Hub (AW-HB505)
CAMERA
CONTROL OUTCAMERA
CONTROL IN VIDEO OUTPAM/TILT
CONTROL OUTPAM/TILT
CONTROL IN
S-VIDEO OUT VIDEO
IN
G/L
OUTG/L
IN
CAMERA
CONTROL OUTVIDEO OUTPAM/TILT
CONTROL OUT
S-VIDEO OUT VIDEO
IN
G/L
OUT
CAMERA
CONTROL OUTVIDEO OUTPAM/TILT
CONTROL OUT
S-VIDEO OUT VIDEO
IN
G/L
OUT
CAMERA
CONTROL OUTVIDEO OUTPAM/TILT
CONTROL OUT
S-VIDEO OUT VIDEO
IN
G/L
OUT
CAMERA
CONTROL OUTVIDEO OUTPAM/TILT
CONTROL OUT
S-VIDEO OUT VIDEO
IN
G/L
OUT
4
3
2
1 5
DC12V  IN
TO CAMERA PAM/TILT HEAD
TO CONTROL PANELPREVIEW OUT
SEE MANUAL 
						

							-6-
SPECIFICATIONSPower: 120 V AC 60 Hz 0.44A
IPower Output: DC12V 2.5A, with over-current protect circuit
Operating temperature: –10°C to +45°C (14°F to 113°F)
Dimensions: 210(W) x 51(H) x 250(D) mm
8-1/4”(W) x 2”(H) x 9-7/8”(D)
Weight: 2.5 kg(5.5 lbs.)
Finish: AV Ivory baking
Weight and dimensions indicated are approximate.
Specifications are subject to change without notice.
AC Cable  .................................................................Ppc.
DC Cable   ................................................................Ppc.ACCESORIES 
						

							N1197-0 7J1A111A Printed in Japan
Broadcast & Television Systems Company
Division of Matsushita Electric Corporation of AmericaExecutive Office:One Panasonic Way 2E-6, Secaucus, NJ 07094
Regional Offices:
EASTERN ZONE:43 Hartz Way, Secaucus, NJ 07094 (201) 348-7620
CENTRAL ZONE:1707 North Randall Road, Elgin, IL 60123 (847) 468-5200
SOUTHERN ZONE:
Atlanta Region:1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30174
Panazip 11 (770) 338-6841, fax (770) 338-6741
Law Enforcement Video Products:1225 Northbrook Parkway, Suite 1-160, Suwanee, GA
30174, Panazip 11 (770) 338-6844, fax (770) 338-6721
WESTERN ZONE:
Los Angeles Region:6550 Katella Ave. 17A-1, Cypress, CA 90630 (714) 373-7271
Government Marketing Department:52 West Gude Drive, Rockville, MD 20850 (301) 738-3840PANASONIC CANADA INC.5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905) 624-5010PANASONIC SALES COMPANY
DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC.San Gabriel Industrial Park, 65th Infantry Ave. KM. 9.5 Carolina, Puerto Rico 00630 (809) 750-4300