Home
>
Panasonic
>
Car Satellite Radio System
>
Panasonic Aac Wma Mp3 Cd Player Receiver Cq C800u Operating Instructions
Panasonic Aac Wma Mp3 Cd Player Receiver Cq C800u Operating Instructions
Have a look at the manual Panasonic Aac Wma Mp3 Cd Player Receiver Cq C800u Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CQ-C800U Radio English 21 Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively. Preset stations can be simply called up by pressing [}] (P-SET) or [{] (P-SET). Notes: ¡Direct selection can be executed with [1]to [6] but- tons on remote control. ¡You can switch between 6 and 18 for FM presetting stations. (EACH BAND/ALL BAND) ¡Preset stations are changeable. (Preset Swap) Auto Preset Memory (APM) Stations with good receiving conditions automatically preset. 1Select a band. 2Hold down [BAND](APM) for 2 sec. or more. The preset stations under best receiving conditions are received for 5 sec. each after presetting the sta- tions (SCAN). To stop scanning, press [}]or [{]. Note:New stations overwrite existing saved stations. Manual station preset 1Tune in to a station. 2Hold down [}]or [{]for 2 sec. or more. 3Turn [VOL]to select a preset number. 4Hold down [PUSH SEL] for 2sec. or more, and the frequency is stored at the selected preset number. Notes: ¡In step 2, a station can be registered by holding down the numeric button [1]to [6]for 2 sec. or more. ¡To stop presetting stations, press [DISP: DISPLAY]. ¡The operation above allows users to replace the cur- rent station with the station preset in the selected number while selecting a preset station. (Preset Swap) Station Preset (APM: AUTO PRESET MEMORY, P-SET: PRESET) OPEN DISP BANDTILT/SET/APM/ CQ-C800U Radio Menu Display 1Press [MENU]to display the menu dis- play. For using the remote control, hold down [SEL] (MENU)for 2 sec. or more. 2Press [PUSH SEL] to adjust. For using the remote control, use [BAND] (SET). 3Press [MENU]to close the menu screen. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more. PRESET Preset range for FM bands : Individual setting for FM1-3 each (default) : Setting of FM1-3 together SQ MENU TUNE TRACK MUTE D ・MSBC- SWFOLDER / P- SET / DISC LIST SOURCEPWR DIM VOLPUSHSEL/SRSWOW SQ MENU TUNE TRACK MUTE D ・MSBC- SWFOLDER / P- SET / DISC LIST SOURCEPWR DIM VOLPUSHSEL/SRSWOW C800U_OI_01_eng 10/18/2007 04:03 PM
22 CD Player CQ-C800U Cautions ¡This unit does not support 8 cm (3”) discs. ¡Do not use irregularly shaped discs. (apage 38) ¡Do not use discs that have a seal or label attached. ¡To avoid damaging the face plate, do not push it down or place objects on it while it is open. ¡Do not pinch your finger or hand in the face plate when the face plate is in motion. ¡Do not insert foreign matter into the disc slots. ¡Refer to the section on “Notes on CD/CD Media (CD-ROM, CD-R, CD-RW)” ( apage 38). ¡This unit does not support a MIX mode CD (a CD containing both CD-DA and compressed audio data). In case of using such a CD, problems may occur such as anacoustic play- back. When a disc is already loaded, press [SOURCE]to select the CD mode. 1Press [uOPEN]to open the face plate. When a disc is already loaded ( lights), the disc will automatically be ejected . 2Load a disc with the printed side facing up. The face plate closes automatically, and the unit rec- ognizes the disc and starts playing automatically, too.3Select a desired portion. Track selection [7] (TRACK): Next track [6] (TRACK): Preceding track (press twice) Note: Hold down for fast forward/reverse. Pause Press [BAND] (h/5). Press again to cancel. 4Press [uOPEN]to eject the disc. Note: The panel automatically closes after 20 sec- onds. OPEN DISP BANDTILT/SET/APM SQ MENU TUNE TRACK MUTE D ・MSBC- SWFOLDER / P- SET / DISC LIST SOURCEPWR / DIM VOLPUSHSEL/SRSWOWCQ-C800U Operation Flow CD Mode Display Printed side Track number Time Lights when the disc is loaded. Play Mode indicators Lights when each mode is activated. CD-TEXT display Notes: ¡For scrolling text, hold down [DISP:DISPLAY]for 2 sec. or more. ¡“NO TEXT” is displayed when there is no information on the disc. C800U_OI_01_eng 10/18/2007 04:03 PM
CQ-C800U23 English CD Player Random and Repeat play can be set. 1Press [MENU]to display the menu dis- play. For using the remote control, hold down [SEL] (MENU)for 2 sec. or more. 2Turn [VOL]to select a function to be adjusted. For using the remote control, use [}]or [{]. 3Press [PUSH SEL] to adjust. For using the remote control, use [BAND](SET). 4Press [MENU]to close the menu screen. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more. RANDOM : Off (default) : Random playback REPEAT : Off (default) : Playing the current track repeatedly TEXT (CD-TEXT) : Enabled (default) : Disabled SQ MENU TUNE TRACK MUTE D ・MSBC- SWFOLDER / P- SET / DISC LIST SOURCEPWR DIM VOLPUSHSEL/SRSWOW Play Mode Selection One-touch operation is available for selecting a track playing style by use of [RANDOM]or [REPEAT]. RANDOM Press [RANDOM]. Press again to cancel. REPEAT Press [REPEAT]. Press again to cancel. SCAN play You can find your favorite track by playing first 10-sec. of each track. Press [SCAN]. Press again to cancel. Direct Access A track can be directly selected. Example: track number 5 1Press [#](NUMBER). 2Press [5]. 3Press [SET]. Note:To suspend direct selection, press [DISP](DISPLAY). Functions Only by Remote Control UnitRandom, Repeat Play (CD Menu Display) (RANDOM, REPEAT)SQ MENU TUNE TRACK MUTE D ・MSBC- SWFOLDER / P- SET / DISC LIST SOURCEPWR DIM VOLPUSHSEL/SRSWOW C800U_OI_01_eng 10/18/2007 04:03 PM
24 MP3/WMA/AAC Player This unit can play MP3, WMA, and AAC files. CQ-C800U Operation Flow When a disc is already loaded, press [SOURCE]to select the compressed audio mode. 1Press [uOPEN]to open the face plate. When a disc is already loaded ( lights), the disc will automatically be ejected . 2Load a disc with the printed side facing up. The face plate closes automatically, and the unit rec- ognizes the disc and starts playing automatically, too. (It may take several minutes to start for a disc that has a lot of files.)3Select a desired portion. Folder selection [}] (FOLDER): Next folder [{] (FOLDER): Preceding folder File selection [7] (TRACK): Next file [6] (TRACK): Preceding file (press twice) Note: Hold down for fast forward/reverse. Pause Press [BAND] (h/5). Press again to cancel. 4Press [uOPEN]to eject the disc. Note: The panel automatically closes after 20 sec- onds. OPEN DISP BANDTILT/SET/APM SQ MENU TUNE TRACK MUTE D ・MSBC- SWFOLDER / P- SET / DISC LIST SOURCEPWR / DIM VOLPUSHSEL/SRSWOWCQ-C800U Compressed Audio Player Mode Display Printed side Folder numberTime Lights when the disc is loaded. Play Mode indicators Lights when each mode is activated. Information Display Notes: ¡For scrolling text, hold down [DISP:DISPLAY]for 2 sec. or more. ¡“NO TEXT” is displayed when there is no information on the disc. File number File type indicator (Folder Random) (Folder Repeat) (Folder Scan) C800U_OI_01_eng 10/18/2007 04:03 PM
CQ-C800U25 English MP3/WMA/AAC Player Notes: ¡Refer to the pages 26 and 27 for cautions. ¡This unit does not support a MIX mode CD (a CD containing both CD-DA and compressed audio files). In case of using such a CD, problems may occur such as anacoustic playback. Random and Repeat play can be set. 1Press [MENU]to display the menu dis- play. For using the remote control, hold down [SEL] (MENU)for 2 sec. or more. 2Turn [VOL]to select a function to be adjusted. For using the remote con- trol, use [}]or [{]. 3Press [PUSH SEL] to adjust. For using the remote control, use [BAND](SET). 4Press [MENU]to close the menu screen. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more. RANDOM : Off (default) : Random playback (disc) FOLDER RANDOM : Off (default) : Random playback (folder) REPEAT : Off (default) : Playing the current file repeatedly FOLDER REPEAT : Off (default) : Playing the current folder repeatedly. TEXT : Folder name/File name (default) : Album/Title/Artist (tag information) : No display RE-MASTER The high-range signal lost through MP3/WMA/AAC compression is reproduced to more closely recreate the pre-compressed sound. Notes: ¡At high bit rates, the Re-master function may have little effect. ¡The Re-master function is only effective for playback of MP3/WMA/AAC data. : Digital sound enhancer activated (default) : Digital sound enhancer inactivated SQ MENU TUNE TRACK MUTE D ・MSBC- SWFOLDER / P- SET / DISC LIST SOURCEPWR DIM VOLPUSHSEL/SRSWOW Play Mode Selection One-touch operation is available for selecting a file playing style by use of [RANDOM]or [REPEAT]. RANDOM, REPEAT Press the button. Press again to cancel. FOLDER RANDOM, FOLDER REPEAT Hold down the button for 2 sec. or more. Hold down again to cancel. SCAN play You can find your favorite file by playing first 10-sec. of each file. SCAN (All files) Press [SCAN]. Press again to cancel. FOLDER SCAN (1st file in each folder) Hold down [SCAN]for 2 sec. or more. Hold down again to cancel. Direct Access A file in the current folder can be directly selected. Example: file number 5 1Press [#](NUMBER). 2Press [5]. 3Press [SET]. Notes: ¡For folder selection, enter a number after pressing [#] (NUMBER) twice. ¡To suspend direct selection, press [DISP] (DISPLAY). Random, Repeat Play (Compressed Audio Player Menu Display) (RANDOM, REPEAT) Functions Only by Remote Control Unit SQ MENU TUNE TRACK MUTE D ・MSBC- SWFOLDER / P- SET / DISC LIST SOURCEPWR DIM VOLPUSHSEL/SRSWOW C800U_OI_01_eng 10/18/2007 04:03 PM
26 MP3/WMA/AAC Player (continued) CQ-C800U Cautions as to compressed audio files Display Information Displayable characters ¡Displayable length of file name/folder name: within 64 characters. (Unicoded file and folder names are reduced by half in the number of displayable charac- ters.) ¡Name files and folders in accordance with the stan- dard of each file system. Refer to the instructions of writing software for details. ¡ASCII character set and special characters in each lan- guage can be displayed. ASCII character set A to Z, a to z, digits 0 to 9, and the following sym- bols: (space) ! ” # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ ] ˆ _ ` { | } ~ Notes: ¡Characters may be garbled depending on encoding software to be used ¡Undisplayable characters and symbols will be convert- ed into an asterisk ( *). ¡Common Folder name, File name ¡MP3 Album name, Title name/artist name (ID3 tag) ¡WMA Album name, Title name/artist name (WMA tag) ¡AAC Album name, Title name/artist name (AAC tag) Cautions as to the display of this unit Common ¡High bit rate and high sampling frequency are recom- mended for high quality sounds. ¡Selecting VBR (Variable Bit Rate) is not recommended because playing time is not displayed properly and sound may be skipped. ¡The playback sound quality differs depending on the encod- ing circumstances. For details, refer to the user manual of your own encoding software and writing software. ¡Be sure to put an extension compatible with the format. MP3 ¡It is recommended to set the bit rate to “128 kbps or more” and “fixed”. WMA ¡It is recommended to set the bit rate to “64 kbps or more” and “fixed”. ¡Do not set the copy protect attribute on the WMA file to enable this unit to play back. AAC ¡It is recommended to set the bit rate to “128 kbps or more” and “Stereo”. ¡Files with the extension of “.m4a” encoded using iTunes version 6 are playable on this unit. Some of the files using other encoders are not playable. ¡Files encoded using Apple Lossless Encoder are not playable. ¡Files with copyright protection are not playable. Caution Never put an extension indicating compressed audio (such as “.mp3”, “.wma”, and “.m4a”) to files other than compressed audio files. This may not only produce noise from the speaker damage, but also damage your hearing. Setting at file making Each of MP3 (MPEG Audio Layer-3), WMA (Windows Media™ Audio), and AAC (Advanced Audio Coding) is a format for compressed audio file. These formats allow users to save all the files contained in approximately 10 pieces of existing CDs on one piece of CD-R/RW. Note:Each of encoding software is not included with this unit. 8, 11.205, 12, 16, 22.05, 24, 32, 44.1, 48 kHzYes 24 k – 320 kbps MPEG 4 AAC LC32, 44.1, 48 kHz Yes 32 k – 192 kbps Windows Media Audio Ver. 2, 7, 8, 9*12, 11.205, 8 kHz Yes 8 k – 160 kbps MPEG 2.5 audio layer 3 (MP3)16, 22.05, 24 kHz Yes 8 k – 160 kbps MPEG 2 audio layer 3 (MP3)32, 44.1, 48 kHz Yes 32 k – 320 kbps MPEG 1 audio layer 3 (MP3) Sampling frequency VBR Bit rate Compression method Compression formats * WMA 9 Professional/LossLess/Voice are not supported. C800U_OI_01_eng 10/18/2007 04:03 PM
CQ-C800U27 English MP3/WMA/AAC PlayerCautions as to disc making Compressed audio file writing ¡Do not save an audio file (CD-DA file) and a com- pressed audio file on the same disc. Failure to observe this may result in difficulty in playing. ¡If compressed audio files formatted with two or more types are saved on the same disc, each format shall have a different folder. ¡Do not write files other than compressed audio files. ¡Playability may depend on the combination of writing software and disc writer to be used. ¡This unit does not support the play list function. ¡Write files in a disc-at-once manner unless otherwise needed. ¡You can shorten the duration between data read and playback by decreasing the quantity of files or folders, or the depth of the hierarchy. Supported file systems ISO 9660 Level 1/Level 2/Level 3, Joliet, Romeo Note: Apple HFS, UDF 1.50, Mix CD and CD Extra are not supported. Folder selection order/file playback order Maximum number of files/folders ¡Maximum number of files: 511 (files + folders) ¡Maximum number of files in one folder: 255 ¡Maximum depth of trees: 8 ¡Maximum number of folders: 255 (Root folder is included.) Notes: ¡This unit counts the number of folders irrespective of the presence or absence of a compressed audio file. ¡If the selected folder does not contain any com- pressed audio file, the nearest compressed audio file in the order of playback will play. ¡Playback order of this unit may be different from that of other compressed audio players even if the same disc is used ¡“ROOT” appears when displaying the root folder name. Root Folder (Root Directory) Folder Selection File Selection Tree 1 Tree 2 Tree 3 Tree 4 Tree 8 (Max.) 2 1 34q q we r t yy 5 6 8 18 7 –In the order –In the order Copyright It is prohibited by copyright laws to copy, distribute and deliver copyrighted materials such as music without the approval of copyright holder except enjoying yourself personally. No warranty Above description complies with our investigations as of October2006. It has no warranty for reproducibility and displayability of MP3/WMA/AAC.Common iTunes is a trademark of Apple Computer, Inc., regis- tered in the U.S. and other countries/regions. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. Windows Media, and the Windows logo are trade- marks or registered trademarks of Microsoft Corporation in the United States and/or other countries/regions. C800U_OI_01_eng 10/18/2007 04:03 PM
28 Audio Setting Adjustment to each speaker and an optional subwoofer CQ-C800U VOLUME Main volume adjustment (Setting range: 0 to 40, Default: 18) q: Up w: Down BASS Bass adjustment (Setting range: -12 dB to +12 dB, 2 dB Step, Default: Bass 0 dB) q: Up w: Down TREBLE Treble adjustment (Setting range: -12 dB to +12 dB, 2 dB Step, Default: Treble 0 dB) q: Up w: Down Note:Do not activate SQ and Bass/Treble at same time to avoid causing sound distortion. BALANCE Balance adjustment (Setting range: L (left)15 to R (right) 15 and Center, Default: Center) q: Right enhanced w: Left enhanced FADER Fader adjustment (Setting range: R (rear) 15 to F (front) 15 and Center, Default: Center) q: Front enhanced w: Rear enhanced SUB.W Subwoofer level adjustment (Setting range : mute (-∞), -6 dB to +6 dB, 2 dB Step, Default: 0 dB) q: Up w: Down LPF Subwoofer Low Pass Filter (Setting range: 80 Hz, 120 Hz, 160 Hz, Default: 80 Hz) q: Up w: Down HPF High Pass Filter (Setting range: Filter OFF, 90 Hz, 135 Hz, 180 Hz, 225 Hz, Default: Filter OFF) q: Up w: Down REAR (SRS WOW) Rear Level Adjustment (Setting range: 0 to –15, Default: –10) q: Up w: Down Note:The rear level is adjustable only when SRS WOW is enabled. ( apage 18) AUDIO Menu Display 1Press[PUSH SEL : Select]to display the AUDIO menu display. For using the remote control, use [SEL](MENU). 2Press [PUSH SEL: Select] to select a mode to be adjusted. For using the remote control, use [SEL] (MENU). 3Turn [VOL] clockwise or counterclockwise to adjust. For using the remote control, use [VOL }]or [VOL {]. Note:Only the VOLUME, SUB.W, LPF, and REAR are adjustable when SRS WOW is enabled. ( apage 18) Subwoofer output range Other speakers output ranges C800U_OI_01_eng 10/18/2007 04:03 PM
CQ-C800U Function Setting Adjustment to display on the FUNCTION menu Audio Setting, Function Setting English FUNCTION Menu Display 29 1Press [MENU]to display the menu dis- play. For using the remote control, hold down [SEL] (MENU)for 2 sec. or more. 2Press []]or [[]to display the FUNC- TION menu. 3Turn [VOL]to select a function to be adjusted. For using the remote control, use [}]or [{]. 4Press [PUSH SEL] to adjust. For using the remote control, use [BAND](SET). 5Press [MENU]to close the menu screen. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more. MUTE KEY Setting [MUTE]buttons’ functions :Volume off (default) :Volume down by 10 steps :Volume down by 5 steps SECURITY Setting the security function (apage 13) : ON (default) : OFF BUILT-IN AMP You can toggle the integrated amplifier on and off. : Amplifier on (default) : Amplifier off (when the external amplifier is used) SQ MENU TUNE TRACK MUTE D ・MSBC- SWFOLDER / P- SET / DISC LIST SOURCEPWR DIM VOLPUSHSEL/SRSWOW lights when disactivated. SQ MENU TUNE TRACK MUTE D ・MSBC- SWFOLDER / P- SET / DISC LIST SOURCEPWR DIM VOLPUSHSEL/SRSWOW C800U_OI_01_eng 10/18/2007 04:03 PM
30 Display Setting Adjustment to display on the DISPLAY menu CQ-C800U DISPLAY Menu Display 1Press [MENU]to display the menu display. For using the remote control, hold down [SEL] (MENU)for 2 sec. or more. 2Press []]or [[]to display the DISPLAY menu. 3Turn [VOL]to select a function to be adjusted. For using the remote control, use [}]or [{]. 4Press [PUSH SEL] to adjust. For using the remote control, use [BAND](SET). 5Adjust the setting value. 6Press [PUSH SEL]. For using the remote control, use [BAND](SET). 7Press [MENU]to close the menu screen. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more. GRAPHIC PATTERN (Default: All) Turn [VOL]to make a selection. All:Sequential display from pattern A to D. Pattern A-D DEMONSTRATION Switching by [PUSH SEL]. ON:Demonstration screen at no operation (default) OFF:Regular screen STILL IMAGE PATTERN (Default: All) Turn [VOL]to make a selection. All:Sequential display from pattern 1 to 10 No.1-10 CLOCK ADJ Note:Adjust the clock when “ADJUST” appears on the display. [[] :Adjusting minutes []] :Adjusting hours q: Forward w: Backward Notes: ¡The graphic pattern and still image are changeable. ( apage 31) ¡If corrupted data is selected, “DISPLAY FILE INCOM- PLETE” appears. ( apage 32) SQ MENU TUNE TRACK MUTE D ・MSBC- SWFOLDER / P- SET / DISC LIST SOURCEPWR DIM VOLPUSHSEL/SRSWOW SQ MENU TUNE TRACK MUTE D ・MSBC- SWFOLDER / P- SET / DISC LIST SOURCEPWR DIM VOLPUSHSEL/SRSWOW C800U_OI_01_eng 10/18/2007 04:03 PM