Panasonic A15 And A35 Bullet Camera Quick Start Guide

 1          Camera            A15 and A35 Bullet Camera Quick Start Guide  

Network Bullet Camera·Quick Operation Guide  1Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer.  About This Document This manual applies to the following models. Model A15 A35 This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice. The updates will be added to the new version of this manual. We will readily improve or update the products or procedures...

Network Bullet Camera·Quick Operation Guide  2Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the...

Network Bullet Camera·Quick Operation Guide  32012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info. 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste...

Network Bullet Camera·Quick Operation Guide  4Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.  The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected. Cautions: Injury or equipment damage may occur if any of the cautions are neglected.  Warnings ● In the use of the product, you must be in strict compliance with the electrical...

Network Bullet Camera·Quick Operation Guide  5● Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard. ● Please make sure that the plug is firmly connected to the power socket. When the product is mounted on wall or ceiling, the device shall be firmly fixed.  ● If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center.   Cautions ● Make sure the power supply...

Network Bullet Camera·Quick Operation Guide  6● Do not place the camera in extremely hot, cold (the operating temperature shall be-30℃~+60℃,or -40°C ~ 60°C if the camera model has an “H” in its suffix), dusty or damp locations, and do not expose it to high electromagnetic radiation.  ● To avoid heat accumulation, good ventilation is required for operating environment.  ● Keep the camera away from liquid while in use. ● While in delivery, the camera shall be packed in its original packing, or packing of...

Network Bullet Camera·Quick Operation Guide  7Table of Contents 1 Appearance Description ................................................................. 8 2 Installation ...................................................................................... 9 3 Setting the Network Camera over the LAN .................................. 13 4 Accessing via Web Browser ................ Error! Bookmark not defined. 

Network Bullet Camera·Quick Operation Guide  81 Appearance Description  Figure 1-1 Bullet Camera Overview Table 1-1 Description No. Description 1 Sun Shield 2 Back Box 3 Grounding Screw 4 Adjustable Bracket 5 Mounting Base 6 Reset 123456 

Network Bullet Camera·Quick Operation Guide  92 Installation Before you start:  Make sure the device in the package is in good condition and all the assembly parts are included.  Make sure all the related equipment is power-off during the installation.  Check the specification of the products for the installation environment.  Make sure the power supply is matched with your required voltage to avoid damage.  If the product does not function properly, please contact your dealer or the nearest service...