Panasonic A F100 Manual

49
Displays
 
N 
■
NO CARD  No card is inserted.
NOW ACCESSING.
PLEASE DO NOT REMOVE CARD.
   Card is currently being accessed. Please do not 
remove the card.
R 
■
REC STOPPED.
NOW WRITING.
    Video recording has been stopped. Data is now 
being written to the card.
REPAIR CLIP? Do you wish to repair clips now?
S 
■
SD CARD FORMAT?
YES  NO
    Do you wish to format the SD Memory Card 
now? Yes/No
SET DATE AND TIME
 Set the date and time.
T
 
■
THE CLIP IS PROTECTED.   
PLEASE CANCEL PROTECTION.
   
The...

50
Screen displays (continued)Setting the DISPLAY items
Display the following items on the viewfinder and LCD monitor by pressin\
g the DISP/MODE CHK
button or by configuring OTHER DISPLAY of the DISPLAY SETUP screen of the setup menus. (Page 60)
Displays MODE CHK
(Hold down DISP/
MODE CHK button) DISPLAYOTHER DISPLAY settings
ALL PARTIAL OFF
1  Time code display
— — ——
2  Media information display
— ——
3  Media capacity display
— ——
4  Recording format display
x x
5  Information display ——— ——
6...

51
Displays
Menu
Setup menu list
SCENE FILE screen
ItemDisplay 
mode Description of settings
SCENE 
SELECT (Camera)
Selects the settings (SCENE FILES) according to the variety of shootin\
g 
circumstances. 
You can read, save, and initialize these settings from MENU - SCENE FILE \
- 
LOAD / SAVE / INIT. 
F1, F2, F3, F4, F5, 
F6
OPERATION 
TYPE (Camera)
Switches the shutter and frame rate operation to video type or film type\
.
FILM CAM:  VFR operation is enabled. SLOW shutter speeds are disabled....

52
Setup menu list (continued)
SCENE FILE screen (continued)
ItemDisplay 
mode Description of settings
DETAIL LEVEL (Camera)
Adjusts the level of the image outline correction (in the horizontal and vertical directions). -7…0…+7
V DETAIL 
LEVEL (Camera)
Adjusts the level of outline correction in the vertical direction. 
-7…0…+7
DETAIL 
CORING (Camera)
Adjusts the level of noise reduction of the detail signal. 
Set to – for a clearer image. Noise increases slightly. 
Set to + to reduce noise. 
-7…0…+7...

53
Menu
 
ItemDisplay 
mode Description of settings
MATRIX (Camera)
Selects the MATRIX table suitable for the desired color expression during shooting.NORM1:  Suitable for shooting in the open air or under a halogen lamp.NORM2:  
Suitable for brighter colors than the NORM1 mode.
FLUO:    Suitable for shooting under fluorescent lights indoors.
CINE-LIKE:  Suitable for cinema-like images.
SKIN TONE 
DTL (Camera)
Switches skin tone details ON or OFF. Select ON to reduce the skin tone details 
and soften the...

54
Setup menu list (continued)
SW MODE screen (continued)
ItemDisplay 
mode Description of settings
LOW GAIN (Camera)
Sets the gain value assigned to the L position of the GAIN switch. 
When OPERATION TYPE = FILM CAM
ISO200, ISO250, ISO320, 
ISO400, ISO500, ISO640, ISO800, ISO1000, 
ISO1250, ISO1600, ISO2000, ISO2500, ISO3200
When OPERATION TYPE = VIDEO CAM
-6dB, -3dB, 0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB
MID GAIN (Camera)
Sets the gain value assigned to the M position of the GAIN switch.
When OPERATION...

55
Menu
 
ItemDisplay 
mode Description of settings
USER1 SW (Camera)
(PB)
Sets the function assigned to the USER1 button. INH:  
   No function is assignedREC CHECK:    Performs recording check.FACE DETECT:   This is the face detection function. Performs the AUTO IRIS / 
AUTO FOCUS operation centering around the detected face. 
Enabled when both focus control and iris control are set to 
auto.
FA :       Displays the edges in red. (Only for LCD/EVF) During 
operation, the LCD/EVF borders are displayed...

56
Setup menu list (continued)
RECORDING SETUP screen
ItemDisplay 
mode Description of settings
PREREC 
MODE (Camera)
Sets PRE RECORDING to ON or OFF.
ON:    
Enables PRE REC function.
OFF :    Disables PRE REC function.
TCG is set to FREE RUN.
•	
Cannot be set when you are using INTERVAL REC.
•	
INTERVAL REC (Camera)
Scenes moving slowly over a long period of time are recorded as short mo\
vies 
by providing a recording interval. One frame is recorded in each recordi\
ng time 
period that has been set,...

57
Menu
 
TC/UB SETUP screen
ItemDisplay 
mode Description of settings
TC MODE (Camera)
Selects the correction mode of the internal time code when the time code\
 of the 
internal time code generator is recorded. 
DF:   
Uses the drop frame mode.
NDF:  Uses the non-drop frame mode.
TC MODE is automatically set to NDF when you set recording frame rate of\
 
•	
recording format to 24P. 
Takes effect only when SYSTEM FREQ = 59.94 Hz. PH 1080/24P and PH 
•	
720/24P represent native recording. 
TCG (Camera)...

58
Setup menu list (continued)
AV IN/OUT SETUP screen
ItemDisplay 
mode Description of settings
SDI & HDMI 
OUT SEL (Camera)
(PB)
Sets the output video format of the SDI&HDMI OUT terminal. 
1080i/720P:
 Output at the resolution set in REC FORMAT. 
DOWNCONV:    SDI is output at 480i, while HDMI is output at 480p. (When 
SYSTEM FREQ = 59.94) SDI is output at 576i, while HDMI is 
output at 576p. (When SYSTEM FREQ = 50)
SDI OUT (Camera)
(PB)
Sets the video output from the SDI terminal. 
ON:    
Video is...