Panasonic A 200 Speed Dome Quick Start Guide

							                                     A-200 Speed Dome  Quick Start Guide  UD.6L0201D0127A02  
						

							 Advidia A-200 5-inch Speed Dome·Quick Start Guide  1 Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the company you purchased the unit from. This manual applies to the Advidia 5-inch speed dome.    DISCLAIMER STATEMENT “Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested for fire, shock or casualty hazards as outlined in UL’s Standard(s) for Safety, UL60950-1. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.” 0402041030114  
						

							 Advidia A-200 5-inch Speed Dome·Quick Start Guide  2 Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his or her own expense. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement   marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC.   2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.  2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info.  
						

							 Advidia A-200 5-inch Speed Dome·Quick Start Guide  3 Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Warnings and Cautions: Warnings: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage.       Warnings  All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region.  Please use the power adapter, which is provided by normal company. The standard of the power adapter is 24VAC10% or 12VDC10% (depending on models). The power consumption cannot be less than the required value.  Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard.  Please make sure that the power has been disconnected before you wire, install or dismantle the speed dome.  When the product is installed on wall or ceiling, the device shall be firmly fixed.   If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center.  If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the speed dome yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.)   Cautions  Do not drop the dome or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage).  Do not place the dome in extremely hot, cold, dusty or damp locations, otherwise fire or electrical shock will occur. The operating temperature should be -30°C ~ 65°C (outdoor speed dome) and -10°C ~ 50°C (indoor speed dome).  The dome cover for indoor use shall be kept from rain and moisture.   Warnings Follow these safeguards to prevent serious injury or death. Cautions Follow these precautions to prevent potential injury or material damage.  
						

							 Advidia A-200 5-inch Speed Dome·Quick Start Guide  4  Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger).  Do not aim the speed dome at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time.  Please use the provided glove when open up the dome cover, avoid direct contact with the dome cover, because the acidic sweat of the fingers may erode the surface coating of the dome cover.  Please use a soft and dry cloth when clean inside and outside surfaces of the dome cover, do not use alkaline detergents.  Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to return the speed dome to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the speed dome and lead to additional costs.   
						

							 Advidia A-200 5-inch Speed Dome·Quick Start Guide  5 Table of Contents 1 Overview ...................................................................................................... 6 2 Installation ................................................................................................... 7 2.1 Wall Mounting ......................................................................................................... 7 2.2 In-ceiling Mounting................................................................................................ 10 2.3 Ceiling Mounting ................................................................................................... 12 2.3.1 Removing the In-ceiling Mount ....................................................................... 12 2.3.2 Wiring For Ceiling Mounting Applications ....................................................... 13 2.3.3 Mounting ........................................................................................................ 14 3 Setting the Dome over the LAN .................................................................. 16 4 Accessing via Web browser ........................................................................ 17   
						

							 Advidia A-200 5-inch Speed Dome·Quick Start Guide  6 1 Overview Please turn the power off before connect the cables. The cable interfaces of network speed dome are shown in following figure(left). The cables are distinguished by different colors. The labels attached on the cables are for identification.       Figure 1-1 Overview Table 1-1 Overview No. Description 1 Network Cable 2 Audio Cable 3 Alarm Output Cables 4 Alarm Input Cables 5 RS-485 Cables 6 Video Cable 7 Power Cable 8 SD Card Slot 9 Power Indicator  1
R
ED
   
  
   
   
  
   
   
  
   
  
AC2
4V
   
  
   
   
  
   
  
  
YE
LLOW/
GRE
E
N  
  
   
   
  
   
   
  
 
B
LACK
  
   
   
   
  
   
  
   
 A
C24
V V I E O D23674589 
						

							 Advidia A-200 5-inch Speed Dome·Quick Start Guide  7 2 Installation Before you start: Check the package contents and make sure that the device in the package is in good condition and all the assembly parts are included. Note: Do not drag the speed dome with its waterproof cables as shown in Figure 2-1, otherwise the waterproof performance is affected.  Figure 2-1 Do Not Drag the Cables 2.1 Wall Mounting Note: The long-arm wall mount is taken as the example for following mounting steps. Steps: 1. Loosen the two lock screws on the both side of the speed dome. Pull the lower dome to separate it from the back box as shown in Figure 2-2. 2. Remove the protective lens cover, foam and sticker from the dome drive. Note: Please do not remove the lock screws from the dome.  Figure 2-2 Remove the Lower Dome Back Box Lock Screw Protective Foam Lower Dome Sticker Lens Cover  
						

							 Advidia A-200 5-inch Speed Dome·Quick Start Guide  8 3. Align the cuts on the lower dome with the lock screws on the back box to reinstall the lower dome. Tighten the lock screws. 4. Drill 4 screw holes in the wall according to the holes of the mount, and then insert M8 expansion screws into the mounting holes. 5. Attach the gasket then wall mount to the wall by aligning the 4 screw holes of the mount with expansion screws on the wall. 6. Secure the wall mount with 4 hex nuts and washers.  Figure 2-3 Secure the Mount Notes:  For cement wall, you need to use the expansion screw to fix the mount. The mounting hole of the expansion pipe on the wall should align with the mounting hole on the mount.  For wooden wall, you can just use the self-tapping screw to fix the mount.  Please make sure that the wall is strong enough to withstand more than 8 times the weight of the dome and the mount. 7. Apply thread tape to the thread of the pendant adapter and rotate the pendant adapter to the mount. Secure the pendant adapter to the mount with a set screw. 8. Loosen the lock screws of the adapter, as shown below:  Figure 2-4 Install the Pendant Adapter Lock Screw Lock Screw Nuts and Washers Expansion Screws ① ② Pendant Adapter Top View of the  Pendant Adapter  
						

							 Advidia A-200 5-inch Speed Dome·Quick Start Guide  9 9. Hook the back box of the speed dome to the mount with the safety rope. Route the cables through the mount. 10. Align the direction label of pendant adapter with the label of the back box to install the speed dome. Rotate the back box clockwise tightly. Secure the back box and the pendant adapter with two lock screws. Note: Please remove the protective film on the lower dome after the installation is finished.  Figure 2-5 Align the Direction Label  Figure 2-6 Mount the Dome Safety Rope  ① Lock Screw Labels ②  ③