Panasonic 85" Class 4k Ultra Hd Tv Tc 85ax850 Owners Manual

10English
 Power cord connection
 
 Power Cord
 Connect after all other connections have been 
made. Back of the TV
 Cable tie (Bundle the Power cord)
 To loosen:
 
 Knob
 Keep pushing the knob
 To remove from the TV:
 
 Keep pushing until both sides snap Snaps
 The removed cable tie can be used to bundle other 
connected cables. (p. 13)
 Antenna connection
 
 Back of the TV
  VHF/UHF Antenna or 
Cable TV
 Cable
●   You need to subscribe to a cable TV service to enjoy 
viewing their programming.
●   A...

11English
 For devices with DVI output
 
   
Audio cable
 
 HDMI-DVI Conversion cable
 
   AV Equipment (e.g. Blu-ray Disc player)
 
 
 To use COMPONENT terminals
 (DVD recorder / Blu-ray Disc player / etc.)
 
  Component cable
 
   AV Equipment (e.g. Blu-ray Disc player)
 
● 
 For additional assistance, visit us at:
 www

.panasonic.com/support
 www.panasonic.ca/english/support
 Connections for 4K contents
 
 or
 
 HDMI cable
 
 HDMI AV OUT
 
 DisplayPort cable
 
 DisplayPort OUT
 
 4K compatible...

12English
 
■ About built-in wireless LAN/Bluetooth
● 
 To use the built-in wireless LAN, using an access 
point is recommended.
●   To use the built-in wireless LAN in the access point 
mode, up to 7 devices are connectable. But the 
transfer rate will vary according to communication 
environment or connected equipments.
●   Do not use the built-in wireless LAN to connect to any 
wireless network (SSID *
1) for which you do not have 
usage rights. Such networks may be listed as a result 
of searches....

13English
  Cable binding instructions
●  Do not bundle the Antenna cable and power cord 
together (could cause distorted image).
●   Fasten the cables as necessary.
●    When using the optional accessory, follow the option’s 
assembly manual to fasten the cables.
 
■ Cable tie
 
 Attach the cable tie
 Insert the cable tie in a hole
 
 Hole
 Bundle the cables
  Hooks
 Set the tip in the hooks
 To loosen:
   Knob
 Keep pushing the knob
 To remove from the TV:
 
 Keep pushing until both sides snap Snaps...

14English
  
Identifying Controls
 TV controls/indicators
 
1
2
345
 Front of the TV
 1  Built-in camera
 Automatically pops up/retracts along with the 
operation of camera application.
 • Do not pull or push the camera by hands.
   1.1 “ (26 mm)
 Lens part
 Adjust the lens angle with adjustment knob on the 
back of the camera.
   Back side of the built-in camera
 Adjustment knob
 2 Human activity sensor 
 3  Remote Control sensor
 Maximum range for remote is 23 feet (7 meters) from 
front of TV set.
 4...

15English
 Remote Control
 
 
 1
 2
 3
  10  9  8  7  6  5  4
  20   19   18   17   16   15   14
 
13   12   11  
28   27   26   25   24   23   22   21
 1 Switches TV On or Off (Standby)
 2  Displays 3D settings
 3  Displays Menu
 4  Displays or removes the information banner
 5  Displays Apps (application) list
 6  Displays Option Menu for special functions (when 
available)
 7  Colored buttons (used for various functions)
 8  Sound mute On/Off
 9  Switches surround sound setting
 10  Volume up/down...

16English
 Touch Pad Controller
 The Touch Pad Controller is designed to facilitate TV 
operations, such as when accessing Home Screen 
or the Browser with the Touch Pad and free pointing 
system. It also covers other TV operations as a Remote 
Control.●   Touch Pad Controller must be paired with the TV 
prior to operation. (Pairing to this 

TV with Bluetooth 
wireless technology.)
 
■ Parts names and functions
  
 1  8
 7  4
 2
 3
 5
 6
 9
  10
 
11
 
12
 
13
 1  Power button
 2  Volume up/down
 3...

17English
 Installing the remote’s batteries
 
■ Remote Control
 
 Pull open
 Hook
 
 
 Note the correct  polarity (+ or -) (AA batteries)  Close
 
■ Touch Pad Controller
 
 Slide open
 
 
 Close
 Note the correct 
polarity (+ or -) 
(AAA batteries)
 Caution
●   Incorrect installation may cause battery leakage and 
corrosion, resulting in damage to the remote control.
 • Do not mix old and new batteries.
 • Do not mix different battery types (such as alkaline 
and manganese batteries).
 • Do not use...

18English
  
First Time Setup
 The first time setup screen is displayed only when the 
TV is turned on for the first time, after the power cord is 
inserted into a wall outlet.
 1  Turn the TV on with the POWER button
 (TV)
 
 or
 (Remote)
 
 2  Setup the following items
●   Select your language
●    Select your country
●   
Select your viewing mode 
(Be sure to select “Home Use”)
 If you select “Store Demonstration” by mistake, 
confirmation screen will be displayed.
 T

o display the “Set viewing mode”...

19English
  
Operations
 Turn power on
  or
 (Remote)
 (TV)
 The last viewed Home Screen is displayed each time 
the TV is turned on.
 Example: Lifestyle Screen
 
 
 Example: Selected content screen
 
● 
 To return to “Home Screen” at any time.
 
●  You can customize “Home Screen” and display 
desired information, access specific features easily
, 
select the default “Home Screen”, etc. For details, 
follow the on-screen instructions or refer to the 
eHELP (Using my Home Screen > my Home Screen 
>...