Panasonic 8420 Operating Instructions Manual

61 Connecting the Printer to a Network
Setting up IPX (Novell) printing
IPX, Novell’s Internetwork Packet Exchange protocol, runs on networks that 
include a Novell NetWare server. The server, typically a dedicated PC, is 
usually configured to control workstation access to shared resources. In 
addition to other services, NetWare servers use IPX protocols to provide 
spooling, queue management, and print services to computers (including 
Macintosh, DOS, UNIX, and VAX) whose operating software is...

62 Connecting the Printer to a Network
To set up network printing, enable IPX/SPX Setup from the printer’s front 
panel (see “Network Protocol Setup” on page 109), and set up the PServer 
using WebSetup after configuring the NetWare server (see “PServer Setup 
tab” on page 120). 
This section explains how to set up the NetWare server so that networked 
users can print to the printer from their workstations. There are two stages 
to this setup:
•The network administrator must set up a print queue on the...

63 Connecting the Printer to a Network
n Setting the NetWare 4.x bindery context
Novell 4.x servers use a different environment setup than Novell 3.1x 
servers. (If your server is using NetWare 3.x, proceed to “Setting up a 
KX-P8420 print queue” on page 66.) The native structure for Novell 4.x 
objects is known as Novell Directory Services (NDS). To provide backward 
compatibility with Novell 3.1x services, Novell 4.x servers use Bindery 
Emulation to “act” like a Novell 3.1x server.
To set up the...

64 Connecting the Printer to a Network
4Use the down arrow key to select Maintenance/
Selective Install.
The Installation Options menu is displayed.
5Select NCF Files Options.
6In the menu of available NCF files, select EDIT 
AUTOEXEC.NCF file. 

65 Connecting the Printer to a Network
7Type a new line anywhere in the file as follows:
set Bindery Context = (Enter your bindery context here)
NOTE:
•To the right of the equals sign, type the bindery context obtained 
from the system administrator.
8Press Esc to close the window, and save changes.
9Proceed to the next section.
To activate the bindery context:
1If you cannot reboot the NetWare server at this point, 
type the set command manually at the server’s 
command prompt.
Use the same command that...

66 Connecting the Printer to a Network
The NetWare print server and print queue are created and configured from 
NetWare Print Console, a NetWare utility that is stored in NetWare’s 
PUBLIC directory.
To set up the NetWare server for printing to the KX-P8420:
1Log in to the NetWare server as the Supervisor.
2At the NetWare MS-DOS prompt, type pconsole
The Available Options menu is displayed.
3Select Change Current File Server and press the 
Enter key.
4Using the arrow keys, select the file server name and...

67 Connecting the Printer to a Network
6Press the Insert key, type a name for the new print 
server, and press the Enter key. Then press the Esc 
key.
You must select this print server later as the NetWare Print Server 
in WebSetup > Network Setup.
7Select Print Queue Information from the Available 
Options menu.
8Press the Insert key and type a name for a new print 
queue. Press the Enter key.
The print queue name you entered will be highlighted in the Print 
Queues list.
If the print server manages...

68 Connecting the Printer to a Network
9Make sure the print queue name you created is selected 
in the Print Queues menu, and press the Enter key. 
The Print Queue Information menu is displayed.
10In the Print Queue Information menu, select Queue 
Servers, and press the Enter key.
A blank Queue Servers list is displayed.
11Press the Insert key.
The Queue Server Candidates list is displayed.
12Use the arrow keys to select the name of the print server 
you created in step 6 and press the Enter key.
The...

 
69 Connecting the Printer to a Network 
Before setting up client workstations, make sure you perform Network 
Setup on the printer, and that the settings reflect the entities you created in   
PCONSOLE  
.
Client setup has two parts: 
• 
Install the PS printer driver on each Windows workstation. 
• 
Configure the printer driver to print to a print queue on a Novell file server.
For instructions on installing the appropriate printer driver for your system 
see “Chapter 4 Installing Software for Windows”....

70
Connecting the Printer to a Network
Setting up Fiery WebTools
Fiery WebTools allow you to manage your KX-P8420 remotely from the 
Internet or from your company’s intranet. The KX-P8420 has its own home 
page, from which you are able to select from a variety of functions including 
Status, Fiery WebSpooler, WebLink, Fiery WebDownloader, and 
Fiery WebSetup.
IMPORTANT:
• Before you can send jobs to the printer, you must use Fiery WebSetup to 
complete the process of configuring Setup options, as...