Panasonic 8415cnts Operating Instructions Manual

							Model No. KX-P8415
Operating Instructions
Settings and Printing (Print.pdf)
This section contains information on printer panel, printer
driver and printing a document.
Care and Maintenance (Mainte.pdf)
Specifications (Spec.pdf)
This section contains information on cleaning the printer,
replacing supplies, clearing jams, troubleshooting, error
messages and repacking.
This section contains the specifications of the printer,
media to be used, software and interface.
The KX-P8415 Operating Instructions consist of the following 3 files.
BPrint.pdf       BMainte.pdf       BSpec.pdf
These files can be opened by clicking on their names below. The printer’s
features are described on the following pages of this file.
Please carefully read the Operating Instructions before operating. Keep KX-P8415 CD-ROM in
the protective case.
Do not expose the CD-ROM to direct sunlight or extreme heat and do not scratch or smudge
the surface of the CD-ROM. 
						

							The KX-P8415 Color Laser Printer provides fast, high-quality color printing on plain paper, plus the
ease of operation and high performance you expect from a laser printer, including the following.
High quality
Resolution—maximum 1200 x 1200 dpi (with optional additional memory) 
High speed
Continuous printing on Letter or A4 size paper
Full-color mode—Maximum 4 ppm (pages per minute)
Three color mode—Maximum 5.3 ppm
Monochrome mode—Maximum 16 ppm
Color management(see “Settings and Printing”)
Agfa CMM (Color Management Module) or ICM (Image Color Management) enables a closer
matching between monitor and printed output. ICM is not supported under Windows NT® 4.0*1.
*
1 Microsoft® Windows NT® Workstation operating system, and Microsoft® Windows NT® Server
network operating system Version 4.0 (hereafter Windows NT 4.0)
Paper handling
nMedia tray:
Standard tray (A4 or Letter): 200 sheets using 75 
g/m2(20 lbs.) paper
Transparency or legal paper can be used when loaded in an optional tray.
nMulti-purpose tray:
The following media can be used in the multi-purpose tray.
BLaser paper
BTransparency
BLabels
BEnvelope
BCard stock
BCoated paper
n2nd cassette feeder (option):
The 2nd cassette feeder has two tray slots, each of which can hold up to 200 sheets of 75 g/m
2
(20 lbs.) paper. (Continued)
Features2 
						

							Overlay printing (see “Settings and Printing”)
Allows you to print a documents overlaid with a graphic image.
Automatic duplex printing (option) (see “Settings and Printing”)
Automatic duplex printing is possible when the optional auto duplex printing unit is installed.
Networking (option)
BSupports TCP/IP and IPX (Novell) protocols simultaneously when the optional Network card for
Ethernet is installed
BSupports 10 Base-T and 100 Base-T
BSupports LPR printing 
Network control tool (Option)
With the optional Network card for Ethernet Card installed, using the network control tool enables the
following functions.
– Displaying the printer information (type of the tray and media used, remaining life of the
consumables, etc.)
– Displaying the printer status
– Configuring the network
– Notifying the printer error by mail
BWindows NT is an either registered trademark or trademark of Microsoft Corporation in the United
States and/or other countries.
BAgfa is a registered trademark of Agfa-Gevaert, AG.
BIPX is a registered service mark of Novell, Inc., in the United States and other countries.
BNovell and NetWare are registered trademarks of Novell, Inc., in the United States and other
countries.
BDestiny
TM, WinStylerTM Display List Color and WinRefsTMare trademarks of Destiny Technology
Corporation.
The operating instructions are subject to change without notice.
WinStyler
TM DLC - Copyright 1995-1999, Destiny Technology Corp. Ver. 1.0 All Rights Reserved.
WinRefs
TMCopyright 1994-1999, Destiny Technology Corp. Ver. 2.0 All Rights Reserved.
© Kyushu Matsushita Electric Co., Ltd. 1999
Features3