Panasonic 8415 Specifications Sheet

Settings and Printing
MaintenanceSpecifications1
Specifications
Printer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Media  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Media Sizes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Margins and Print Area  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Paper Weight  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Settings and Printing
MaintenanceSpecifications2
Power source
Refer to the nameplate on the rear of the unit.
Temperature
Operating: 10
°C to 32.5°C (50°F to 90.5°F)
Best Print Quality: 15°C to 25°C (59°F to 77°F)
Storage: 0°C to 40°C (32°F to 104°F)
Humidity
Operating: 20% to 80% RH
Best Print Quality: 30% to 70% RH
Storage: 10% to 80% RH
Warm-up time
Less than 300 seconds (at 20°C)
Power consumption
850 W Max. (printing with fuser on)
35 W (standby with fuser off)
25 W (Energy Star mode)
Meets Energy...

Settings and Printing
MaintenanceSpecifications3
Paper output
Up to 500 sheets [75 g/m2(20 lbs.)]
Resolution
600 x 600 dpi (Standard)
1200 x 1200 dpi*
1(Premium)
*
1It is possible to print a single-sided document at 1200 x 1200 dpi with the standard 32 MB of
memory. However, you may experience a “Memory Overflow” error when printing complex
documents. 
Should this be the case, you will have to use either a lower resolution or increase the printers
memory (see RAM buffer below).
Maximum printing speed
The...

Settings and Printing
MaintenanceSpecifications4
Interface
Standard: Bidirectional Parallel
Option: Ethernet (10/100 baseT)
Altitude
Operating: 0 to 2,500 m (8,000 ft.)
Storage: 0 to 4,000 m (13,125 ft.)
Printer / Media
Media
Dimensions
Envelope104.9 mm x 241.3 mm (4.13²x 9.5²)  216 mm x 279 mm (8.5²x 11²) Media
Transparency Paper216 mm x 279 mm (8.5²x 11²) 
210 mm x 297 mm (8.3²x 11.7²) 
216 mm x 356 mm (8.5²x 14²) Size
Letter
A4
Legal
Letter
A4
#10210 mm x 297 mm (8.3²x 11.7²) 
Media Sizes
NOTE
BPlease...

When the image is printed on the media, the image (print area) is a bit smaller than the media size.
You may need to adjust the page margins in the application software to match the print area.
The following table and illustrations show the page sizes, the largest print areas, and the margins for
the media sizes supported on this printer.
Settings and Printing
MaintenanceSpecifications5
MediaPrint area
5.8 mm
(0.23
²)
MarginsPage sizeTopBottom Sides
Letter216 mm x 279 mm
(8.5²x 11²)209 mm x 268 mm
(8.2²x...

Settings and Printing
MaintenanceSpecifications6
The printer is designed to work well with most types of paper. However, differences in paper may
have significant effects on the quality of the print or the reliability of paper handling.
It is strongly recommended that you always test paper before purchasing it to make sure it provides
desirable performance.
BRecommended paper (for optimum performance):
LETTER/LEGAL : Hammermill LASERPRINT 90 g/m
2(24 lbs.)
A4 : 4CC 80 g/m2
*1Optional 2nd cassette feeder...

Manual duplex printing is possible by using the multi-purpose tray. Automatic duplex printing is
possible by installing the optional 2nd cassette feeder with ADU.  However, you should not expect the
same print quality and reliability that you get with single-sided printing. We strongly recommend that
you follow the guidelines below.
Notes for manual duplex printing:
BDo not load more than 50 sheets in the multi-purpose tray.
BBefore loading paper in the multi-purpose tray, adjust it so that the edges of...

Settings and Printing
MaintenanceSpecifications8
You may also print on transparencies and labels that are made for the printer. Panasonic has tested
and found that the following work satisfactorily.
BRe-using transparencies that have been fed through the printer once (for example, after jams or
if the transparency is ejected without being printed) can reduce the life of the consumables and
paper path components.
BWith any label stock, the labels must completely cover the backing material.
Labels cover...

Settings and Printing
MaintenanceSpecifications9
It is recommended that you print in black text only and purchase high quality #10 or larger laser
envelopes with diagonal seams, as shown in the diagram below:
High quality envelopes have the following characteristics:
BA thin, sharply creased leading edge
BPaper weight of 90 g/m
2(24 lbs.)
BFlat, free of curls, wrinkles, nicks, etc.
NOTES
BWrinkle may occur in some case, even if high quality envelopes are used.
BWhen a wrinkle occurs, try printing with...

Settings and Printing
MaintenanceSpecifications10
Side seam construction Peel-off strip Multiple flaps
Twist Curl Bent-edge
Wave Dog-ears Self adhesive
Do not attempt to print on any of the following types of envelopes. These may cause damage to your
printer.
BEnvelopes with clasps, snaps or tie strings (see Figure 1)
BEnvelopes with transparent windows (see Figure 2)
BEnvelopes that will melt, discolor, scorch offset or release hazardous emissions when exposed to
200°C (392°F) for 0.1 second
BEnvelopes...