Panasonic 60" Class 1080p Plasma Hdtv Tc 60put54 Owners Manual
Have a look at the manual Panasonic 60" Class 1080p Plasma Hdtv Tc 60put54 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
10 Power cord connection To attach To remove Insert it firmly until the tabs on both sides click into place.Keep pushing both sides until they snap and pull. Installing the remote’s batteries Open Hook Note the correct polarity (+ or -).Close Caution Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control. • Do not mix old and new batteries. • Do not mix different battery types (such as alkaline and manganese batteries). • Do not use rechargeable (Ni-Cd) batteries. Do not burn or break batteries.
11 BC A Connections Connection Panels Antenna or Cable connection Cable ●You need to subscribe to a cable TV service to enjoy viewing their programming. ●You may need to subscribe to a high-definition (HD) cable service to enjoy HD programming. The connection for high-definition can be done with the use of an HDMI or Component Video cable. (p. 12) Note ●When using a Cable box, external equipment and video cables shown in this manual are not supplied with the TV. ●When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first. ●For additional assistance, visit us at: www.panasonic.com/help www.panasonic.ca Back of the TV DIGITAL AUDIO OUT ETHERNET connector SD card slot USB connector Power Cord (Connect after all the other connections have been made.)VHF/UHF Antenna • NTSC (National Television System Committee): ATSC (Advanced Television Systems Committee): Digital TV Standards include digital high-definition television (HDTV), standard-definition television (SDTV), data broadcasting, multi-channel surround sound audio and interactive television. Back of the TV Cable TV VHF/UHF Antenna or * See page 10 (Power cord connection) ■Wireless adapter connection Back of the TV ■Setup Wireless LAN Adapter Insert straight in
12 AV cable connection Audio connection Best Good Basic (Not HD) To use HDMI terminals L R HDMI AV OUT HDMI-DVI Conversion cableDVI OUT AUDIO OUTe.g. Blu-ray Disc player e.g. Blu-ray Disc player AV Equipment AV Equipment Connect to Audio input terminal To use COMPONENT terminals L RY P B PR AUDIO OUT COMPONENT VIDEO OUT white red green blue red white red green blue red white red green blue red e.g. Blu-ray Disc playerAV Equipment To use COMPOSITE terminals L RCOMPOSITE OUT yellow white redyellow white red yellow white redor e.g. DVD Recorder AV Equipment e.g. VCR DIGITAL AUDIO IN e.g. Amplifier Audio equipment ●The Green terminal is shared for both the COMPONENT and COMPOSITE (VIDEO IN) connection. When using COMPOSITE (VIDEO IN) connection, the Yellow connector (Video) should be inserted into Green connection. Comp. Videoselect (For more details, please refer to eHELP (p. 16). ) Optical cable
13 Front of the TV Back of the TVChanges the input mode Chooses Menu and Submenu entries (Press and hold down for MENU function) Volume up/down Remote control sensor within about 23 feet (7 meters) in front of the TV setSelects channels in sequence C.A.T.S. sensor Plasma C.A.T.S. (Contrast Automatic Tracking System) POWER button Power indicator (on: red, off: no light) • An image of the control panel is displayed on the screen while using it. Identifying Controls Note ●The TV consumes a small amount of electric energy even when turned off. ●Do not place any objects between the TV remote control sensor and remote control. TV controls/indicators Remote control Switches TV On or Off (Standby) Select source to watch Displays Main Menu Displays Options Menu for special functions (when available) Colored buttons (used for various functions) Volume up/down Sound mute On/Off Changes aspect ratio and zoom Switches to previously viewed channel or input External equipment operations * Functions are switched depending on connected external equipment and operation. : Press and hold to Skip backward/ forward Accesses NETFLIX service directly (via VIERA Connect) • You need a Broadband environment to use this service • This service might be stopped or the conditions changed without notice. Closed Caption On/Off Selects Secondary Audio Programming Exits from menu screen Displays 3D settings (p. 15) Displays VIERA Connect Home screen Displays VIERA TOOLS menu Selects/OK/Change Go back to previous menu Channel up/down, when viewing from ANT/Cable source Displays or removes the information banner Operates the Favorite channel list function Numeric keypad to select any channel or press to enter alphanumeric input in menus Use for digital channels Viewing from external media (SD/USB)
14 or Turn the TV on with the POWER button or (Remote) (TV) Setup the following items ●Select your language ●Select your country ●Select your viewing mode (Be sure to select “ Home Use”) If you select “ Store Demonstration” by mistake, confirmation screen will be displayed. To display the “Set viewing mode” screen again and select “Home Use”, do one of the following: • Press and hold down the side POWER button for at least five seconds. • Unplug power cord for 30 seconds and plug in again. ●ANT/Cable setup Select and set the settings according to your ANT/Cable environment. Select “Yes” on the confirmation screen, to start the scanning process. After scanning is finished completely, press OK to continue. ●Label the inputs for easy identification To name each input, follow the instructions on screen. When this is done, select NEXT and press OK to go to the next step. ●Configure Network settings Select the Network type and select the setting mode. If you select “Wireless (WiFi)”, start “Wireless network settings”. Select “Automatic” or set “Manual” setting, start connection test. When you complete “Network settings” successfully, the completion screen will be displayed. ●Adjust the Clock Select the clock mode and set other settings. When “Auto” is selected, clock will be set automatically according to Time zone and DST. Complete First time setup Completion screen is displayed. You can repeat the First time setup • Press MENU -- > Setup -- > First time setup To watch TV via a Cable box, Satellite receiver, or any other source (DVD, DVR, gaming device, etc.), press the INPUT button and select the appropriate input. First Time Setup The first time setup screen is displayed only when the TV is turned on for the first time, after the power cord is inserted into a wall outlet and the “Auto power on” is set to “No”. (Press MENU -- > Setup -- > Advanced setup -- > Auto power on)
15 Precautions for Viewing 3D Images Cautions During Viewing Do not use devices that emit strong electromagnetic waves (such as cellular phones or personal transceivers) near the 3D Eyewear. Doing so may cause the 3D Eyewear to malfunction. If the 3D Eyewear is used in a room in which fluorescent lights (50 Hz) are used, the light within the room may appear to flicker. In this case, either darken or switch off the fluorescent lights when using the 3D Eyewear. Wear the 3D Eyewear correctly. 3D images will not appear correctly if the 3D Eyewear is worn upside down or back-to-front. For comfortable viewing View from at least the recommended distance (3 times the effective height of the screen), Recommended Distance: 7.55’ (2.3 m) or more. When the top and bottom area of the screen are blackened, such as when playing movies, view the screen at a distance 3 times further than the height of the actual image. (That makes the viewing distance closer than above recommended distance.) Stop using the 3D Eyewear immediately if your skin feels unusual. In rare cases, the paint or materials used in the 3D Eyewear may cause an allergic reaction. Stop using the 3D Eyewear immediately if you experience any redness, pain, or itching on the nose or temples. Prolonged use may cause such symptoms due to excess pressure, which may result in the user feeling unwell. Use the 3D Eyewear where there is no interference from other devices with Bluetooth® signals. Viewing 3D images The following 3D content can be enjoyed on this TV: • A 3D Blu-ray disc, played on 3D capable Blu-ray player/recorder that is connected via HDMI cable. • 3D TV broadcast (program) • 3D Photo and 3D Movie taken by LUMIX/Camcorder. • 3D game played on 3D capable video game console, connected via HDMI cable. Optional Accessories (p. 8) * For more detail on usage of 3D Eyewear (POWER button, Accessories and how to register, etc.), please refer to operating manuals for the purchased 3D Eyewear. 3D experience differs depending on the type of 3D Eyewear. Using the 3D Eyewear Turn on the 3D Eyewear. Make sure that registration is finished completely. Put on the 3D Eyewear. Viewing 3D imagesWhen the HDMI receives information in which 3D mode is detected, 3D images are automatically displayed according to the signal. If the 3D images are not displayed correctly, or if the images cause discomfort, the images can be adjusted by “3D format select” or “3D settings”. ●Change the view 3D⇔ 2D, 3D settings. After Use Turn off the 3D Eyewear. After using the 3D Eyewear, store it in the case. Change the view 3D⇔2D ■Simply switches 3D ⇔ 2D images (Auto mode) (example) 3D format select 3D 2D select OK ● Switches to Manual mode Viewing 3D images on TV
16 Using eHELP (Built-in Manual) eHELP (built-in manual) helps you understand how to easily operate the TV features. Display eHELP[Top page] select next When you enter eHELP again after exit, the confirmation screen is displayed while the TV is turned on. You can select “TOP PAGE” or “LAST PAGE”. select next Select the desired page from the menu Categories MenusSub menus Desired page select next select next select Change the menus using ▲/ ▼ To return to the previous menu/layer To exit eHELP Operate eHELP “Go to Menu” is available depending on the situation or condition. Display the Menu related to the explanation page after exiting eHELP.MenuPicture Audio Timer Lock Setup Network Setup 1/2 ANT/Cable setupInput labels Anti image retention Closed Caption Channel surf mode Language ClockAll 3D settings
17 Frequently Asked Questions (FAQ) Care and Cleaning First, unplug the Power cord plug from the wall outlet. Display panel The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. If the surface is particularly dirty, after cleaning up the dust, soak a soft, lint-free cloth in diluted, mild liquid dish soap (1 part mild liquid dish soap diluted by 100 times the amount of water), and then wring the cloth to remove excess liquid. Use this cloth to wipe the surface of the display panel, then wipe it evenly with a dry cloth of the same type until the surface is dry. Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the surface may be adversely affected. Cabinet If the cabinet becomes dirty, wipe it with a soft, dry cloth. If the cabinet is particularly dirty, soak the cloth in diluted, mild liquid dish soap and then wring the cloth dry. Use this cloth to wipe the cabinet and then wipe it dry with a dry cloth. Do not allow any mild liquid dish soap to come into direct contact with the surface of the Plasma TV. If water droplets get inside the unit, operating problems may result. Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the cabinet surface may be adversely affected or the coating may peel off. Do not let articles made from rubber or PVC be in contact with the TV for long periods of time. Pedestal Cleaning Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small amount of mild liquid dish soap has been added and then wipe with a dry cloth. Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating. (If using a chemically-treated cloth, follow the instructions supplied with the cloth.) Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-term contact with rubber, vinyl products, or the like. (Doing so will cause deterioration.) Power cord plug Wipe the plug with a dry cloth at regular intervals. (Moisture and dust can lead to fire or electrical shock.) Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we disclaim any liability or damage arising from operation and/or performance from usage of such other maker’s peripheral devices. Questions Answers Why doesn’t the Remote Control work? Check that the batteries are fresh, are of the same type and are installed with the correct polarity (+ & -). To operate other devices, such as changing channels when using Cable, or Satellite boxes, or operating non-Panasonic Blu-ray players, use the remote supplied with the device. Why is there no picture or just a blue, black or snowy screen being displayed? Check if the power cord is plugged in and the TV is turned on (front red LED light should be on, not blinking). Press the INPUT button on the remote to select the correct input source. Ensure all connections are correct and secure. When using external video source, such as a Cable/Satellite box or DVD player, check that the device is on and functioning correctly. Press MENU on the TV’s remote control. If the menu is displayed, then the TV is working; recheck above steps. Why is the screen blank and the power indicator blinking? The TV has gone into shutdown mode to protect itself. Try unplugging it for a few minutes and connecting it again. If there was a temporary power surge on the AC line it may now be OK. If the blinking returns, call 1-877-95-VIERA (U.S.A.) or 1-866-330-0014 (Canada). How do I display eHELP (built-in Manual) ? Press VIERA TOOLS on the TV’s remote control and select eHELP icon to display eHELP. (p. 16)
18 Specifications TC-60PUT54 Power SourceAC 120 V, 60 Hz Power Consumption (Rated power / Standby power)427 W / 0.2 W Display PanelPanel SystemPlasma Display panel Screen size60 ” class (60.1 inches measured diagonally) W × H × Diagonal52.3 ” × 29.4 ” × 60.1 ” (1,330 mm × 748 mm × 1,526 mm) Number of pixels1,920 × 1,080 Speaker Output20 W [10 W + 10 W] (10 % THD) Channel Capability (Digital/Analog)VHF/ UHF: 2 - 69, CATV: 1 - 135 Operating ConditionsTemperature: 32 °F - 104 °F (0 °C - 40 °C) Humidity: 20 % - 80 % RH (non-condensing) Connection TerminalsVIDEO INRCA PIN (VIDEO, AUDIO-L, AUDIO-R) COMPONENT INRCA PIN (Y, PB, PR, AUDIO-L, AUDIO-R) HDMI IN 1/2TYPE A Connector (supports “HDAVI Control 5” function) USB 1/2USB2.0 Type A connector DIGITAL AUDIO OUTPCM / Dolby Digital, Fiber Optic OTHERSSD CARD slot, ETHERNET (10BASE-T/100BASE-TX) DimensionsIncluding pedestal (W × H × D)55.2 ” × 34.8 ” × 15.3 ” (1,401 mm × 883 mm × 387 mm) TV Set only (W × H × D)55.2” × 32.9 ” × 3.3 ” (1,401 mm × 835 mm × 84 mm ) Mass Including pedestal83.8 lb. (38.0 ) NET TV Set only73.9 lb. (33.5 ) NET Bluetooth Standard Compliance Bluetooth® 3.0 Frequency Range2.402GHz~2.480GHz Use Panasonic 3D Eyewear supporting Bluetooth wireless technology. Note Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
19 Limited Warranty (for U.S.A. and Puerto Rico only) Panasonic Consumer Marketing Company of North America, Division of Panasonic Corporation of North America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Plasma Television Limited Warranty Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Marketing Company of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor. PLASMA TV CATEGORIES PARTS LABOR SERVICE Up to 42” (diagonal) 1 (ONE) YEAR 1 (ONE) YEARCarry-In 46” (diagonal) and largerOn-Site During the “Labor” Limited Warranty period there will be no charge for labor. During the “Parts” Limited Warranty period, there will be no charge for parts. You must carry-in your product or arrange for on-site service during the Limited Warranty period. If non-rechargeable batteries are included, they are not warranted. This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser of a new product which was not sold “as is”. A purchase receipt or other proof of the original purchase date is required for Limited Warranty service. On-Site or Carry-in Service For On-Site or Carry-In Service in the United States and Puerto Rico call 1-877-95-VIERA (1-877-958-4372). On-site service where applicable requires clear, complete and easy access to the product by the authorized servicer and does not include removal or re-installation of an installed product. It is possible that certain on-site repairs will not be completed on-site, but will require that the product or parts of the product, at the servicer’s discretion be removed for shop diagnosis and/or repair and then returned. Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage, nor does it cover markings or retained images on the glass panel resulting from viewing fixed images (including, among other things, non-expanded standard 4:3 pictures on wide screen TV’s, or onscreen data in a stationary and fixed location). The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or commercial use (such as in a hotel, office, restaurant, or other business), rental use of the product, service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, or travel to and from the servicer. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE LIMITED WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied Limited Warranty lasts, so the exclusions may not apply to you. This Limited Warranty gives you specific legal rights and you may also have others rights which vary from state to state. If a problem with this product develops during or after the Limited Warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor. PARTS AND SERVICE (INCLUDING COST OF AN ON-SITE SERVICE CALL, WHERE APPLICABLE) WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.