Panasonic 60" Class 1080p Lcd Hdtv Tc L60e55 Owners Manual
Here you can view all the pages of manual Panasonic 60" Class 1080p Lcd Hdtv Tc L60e55 Owners Manual . The Panasonic manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 1
manual electrónico (eAyuda ) Owner’s Manual 60” Class 1080p LCD HDTV (59.5 inches measured diagonally) Manual de usuario Televisión de alta definición de 1080p y clase 60” de LCD (59,5 pulgadas medidas diagonalmente) For assistance (U.S.A./Puerto Rico), please call:1-877-95-VIERA (958-4372)www.panasonic.com/help For assistance (Canada), please call:1-866-330-0014concierge.panasonic.ca Para solicitar ayuda (EE.UU./Puerto Rico), llame al: 1-877-95-VIERA (958-4372)www.panasonic.com/help TQB2AA0675 Gracias...
Page 2
2 This product incorporates the following software or technology:(1) the software developed independently by or for Panasonic Corporati\ on, (2) the software owned by third party and licensed to Panasonic Corpor\ ation, (3) the software based in part on the work of the Independent JPEG Gro\ up, (4) the software developed by the FreeType Project, (5) the software licensed under the GNU LESSER GENERAL PUBLIC LICENSE (LGPL) and/or, (6) open sourced software other than the software licensed under the L\...
Page 3
3 VIERA Link™ is a trademark of Panasonic Corporation. HDMI, the HDMI logo and High- Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. SDXC Logo is a trademark of SD- 3C, LLC. “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance. QuickTime...
Page 4
4 ANTENNA LEAD-IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) ELECTRIC SERVICE EQUIPMENT GROUND CLAMP EXAMPLE OF ANTENNA GROUNDING AS PER (NEC) NATIONAL ELECTRICAL CODE Safety Precautions Note to CATV System Installer This reminder is provided to direct the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and,...
Page 5
5 19) An outside antenna system should not be located in the vicinity of overh\ ead power lines, other electric light, power circuits, or where it can fall into such power lines or circuits. When installing an \ outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them mig\ ht be fatal. 20) Unplug this LCD TV from the wall outlet and refer servicing to qualified service personn\ el under the following conditions: a. When the power...
Page 6
6 FCC and IC STATEMENT This equipment has been tested and found to comply with the limits for a\ Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmf\ ul interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy an\ d, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. H\ owever, there is no...
Page 7
7 ■About built-in wireless LAN ●To use the built-in wireless LAN, an access point needs to be obtained. ●Do not use the built-in wireless LAN to connect to any wireless network \ (SSID*1) for which you do not have usage rights. Such networks may be listed as a result of searches. However, using them may be regarded as illegal access. ●Do not subject the built-in wireless LAN to high temperatures, direct su\ nlight or moisture. ●Check that the Access point supports WPS*2. (If it does not support...
Page 8
8 Accessories/Optional Accessories Accessories Check you have all the items shown. Accessories Remote Control Transmitter N2QAYB000779 Batteries for the Remote Control Transmitter (2) AA Battery Owner’s Manual Quick Start Guide Child safety Product Registration Card (U.S.A.) Pedestal Optional AccessoriesPlease contact your nearest Panasonic dealer to purchase the recommended\ optional accessories. For additional details, please refer to the option\ al accessories installation manual....
Page 9
9 Accessories Assembly screws XYN4+F10FNK (Black) size (M4 x 10) (5) XYN5+F16FN (silver) size (M5 x 16) (4) Bracket (1) TBL5ZA3238 Cover (1) TXFBL5Z0071 Base (1) TBL5ZX04911 Attaching the pedestal to TV ■Assembling the pedestal Attach the Bracket to the protrusion of Neck. Make sure that the bracket is anchored before fixing the screws. Fix securely with assembly screws (4 screws) B x 4 pcs. Bracket Protrusion of Neck (top) BaseFront Attach the cover and fix securely with assembly screw. A x...
Page 10
10 Power cord connection • When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first. • The included power cord is for use with this unit only. Insert the power cord plug (included) firmly into place. Installing the remote’s batteries Open Hook Note the correct polarity (+ or -). Close Caution Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control. • Do not mix old and new batteries. • Do...