Panasonic 58"65"class 4k Ultra Hd Tc 58ax800 Owners Manual

11English
  Ensure that the TV does not hang over the edge of the 
base.
 
  Front Pedestal
  Rear Pedestal
 
   
Removing the Rear Pedestal from the TV
  Be sure to remove the Rear Pedestal in the following 
way when using the wall-hanging bracket or repacking 
the TV.
  1  Pull out the cover from the Rear Pedestal.
  2  Remove the assembly screws 
 from the TV.
  3  Lift up the TV at a slight angle from the Rear Pedestal 
as shown.
 
  (View from the side)
  4  Attach the cover to the Rear Pedestal.
●...

12English
   
Attaching Ferrite core
 
Be sure to attach the provided ferrite core to the Power 
code to reduce interference or electrical noise.
 
 ∗  
1.2 ” (30 mm)   Back of the TV
  1  Attach the ferrite to Power cord on the TV side as 
shown.
 
  2  Close the ferrite core until it clicks.
 
personal injury may result. Contact your nearest 
Panasonic Dealer immediately.
  During set-up, make sure that all screws are 
securely tightened.
●  
If sufficient care is not taken to ensure screws are...

13English
  Power cord connection
 
 
Power Cord
  Connect after all other connections have been 
made.  Back of the TV
 
Cable tie (Bundle the Power cord)
  To loosen:
   Knob  Keep pushing the knob
 
To remove from the TV:
 
  Keep pushing until both sides snap  Snaps
  The removed cable tie can be used to bundle other 
connected cables. (p. 16)
  Antenna connection
 
 
Back of the TV
  VHF/UHF Antenna
  or  Cable TV
 
Cable
●  
You need to subscribe to a cable TV service to enjoy 
viewing their...

14English
●  
For additional assistance, visit us at:
  www.panasonic.com/support
  www.panasonic.ca/english/support
 
Connections for 4K contents
 
 
or
 
 HDMI cable
 
 HDMI AV OUT
 
 DisplayPort cable
 
 DisplayPort OUT
 
 4K compatible equipment
●  
To watch contents of 4K format, connect the 4K 
compatible equipment to HDMI4 or DisplayPort by 
using a 4K compatible cable.
●  
When connecting to DisplayPort, use DisplayPort 1.2 
compliant cable.
  • 
Please refer to eHELP (p. 26) for more details....

15English
  ■ 
About built-in wireless LAN/Bluetooth
●  
To use the built-in wireless LAN, using an access 
point is recommended.
●  
To use the built-in wireless LAN in the access point 
mode, up to 7 devices are connectable. But the 
transfer rate will vary according to communication 
environment or connected equipments.
●  
Do not use the built-in wireless LAN to connect to any 
wireless network (SSID*1) for which you do not have 
usage rights. Such networks may be listed as a result 
of searches....

16English
   
Cable binding instructions
 
Put the cables into the cover.
●  
To bundle the connected cables, use the cable tie that 
came with the power cord.
●  
Do not bundle the Antenna cable and power cord 
together (could cause distorted image).
●  
Fasten the cables as necessary.
●  
Be careful not to pinch the cables between the Rear 
Pedestal and the edge of the cover.
●  
When using the optional accessory, follow the option’s 
assembly manual to fasten the cables.
   Hooks
  Cover
 
   Cable...

17English
  ■ 
Cable tie
 
 
Attach the cable tie
  Insert the cable tie in a hole
 
  Hole
  Bundle the cables
   Hooks
 
Set the tip in the hooks
  To loosen:
   Knob  Keep pushing the knob
 
To remove from the TV:
 
  Keep pushing until both sides snap  Snaps
5$@BYV@FOHJOEC


5$@BYV@FOHJOEC








 

18English
  4 POWER button
  • 
An image of the control panel is displayed on the 
screen while in use.
  Note
●  
The TV consumes a small amount of electric energy 
even when turned off.
●  
Do not place any objects between the TV remote 
control sensor and remote control.
●  
For more information about operation for built-in 
camera or human activity sensor, please refer to 
eHELP. (p. 26) 
  Panasonic does not guarantee operation and 
performance of peripheral devices made by other 
manufacturers; and...

19English
  12 External equipment operations
 *
    Functions are switched depending on connected 
external equipment and operation.
 
 :  Press and hold to skip backward/
forward.
  13 Switches to previously viewed channel or input
 
14 Lights the buttons for 5 seconds
  Press again to turn off the button lights
 
15 Closed caption On/Off
 
16 Selects Secondary Audio Programming
 
17 Returns to Home Screen
 
18 Displays Home Screen
 
19 Selects source to watch
 
20 Selects/OK/Change
 
21 Go back to...

20English
  Use the Touch Pad Controller within the range of 
10.5 ft (3.2 m) from front surface of the TV. The range 
may be shortened if there are any obstacles or can be 
affected by the surrounding environment or building 
structure.
  ■ 
 
Pairing Touch Pad Controller
 
1  Insert the batteries in the Touch Pad Controller.
  2  Hold the Touch Pad Controller within 1.6 ft. (50 cm) of 
the TV.
  3  Operate touch pad or press any button other than 
Power button to start pairing.
  4  Please complete the...