Panasonic 58"65" Class 1080p Plasma Hdtv Tc 58ps24 Operating Instructions

							1011
High-Definition
Standard-Definition
Note
  For more details on the external equipment’s connections, please refer to the operating manuals for the equipment.
Basic Connection (Continued)
 To use HDMI terminals
HDMI
AV OUT
e.g. Blu-ray Disc player
AV Equipment
 Connecting to HDMI terminals will enable you to enjoy high-definition di\
gital images and high-quality sound.  The HDMI connection is required for a 1080p signal.
 To use COMPONENT terminals
L
R Y
P
B
PR
AUDIO
OUT
COMPONENT
VIDEO OUT
white red
green
bluered
white
red green blue red
whitered
green
bluered
e.g. Blu-ray Disc 
player
AV Equipment
 To use COMPOSITE terminals
L
RCOMPOSITE
OUT
yellow
white
red yellow
white red
yellow
white
red or
e.g. DVD Recorder AV Equipment
e.g. VCR
AV cable connections
Remote control
Switches TV On or Off (Standby)
Changes the input mode
Displays Main Menu
Displays Sub Menu
Colored buttons 
(Use for various functions following
the instructions on screen.)
Volume up/down
Sound Mute On/Off
Changes aspect ratio
Switches to previously viewed channel 
or input modes
Operate the external equipment with
“VIERA Link control” function.
(Refer to the Operating Instructions
on the CD-ROM.) Closed caption On/Off
Selects Audio Mode for TV viewing
Exits from Menu screen
VIERA Link menu
Displays VIERA TOOLS
Viewing from SD Card
Selects/OK/Change
Returns to previous menu
Channel up/down
Displays or removes the channel 
banner
Operates the Favorite channel list 
function
Numeric keypad to select any channel 
or press to enter alphanumeric input in 
menus 
Use for digital channels
Identifying Controls
Note
  The TV consumes a small amount of electric energy even when turned off.  Do not place any objects between the TV remote control sensor and remote control.
TV controls/indicators
Changes the input 
mode
Chooses Menu and 
Submenu entries
Displays the Main 
menu Volume up/down Selects channels 
in sequence
Front of the TV
Back of the TVSD card slot
HDMI Input 3 connector Video Input 2 connector
C.A.T.S. sensor
Plasma C.A.T.S. (Contrast Automatic 
Tracking System)
Power indicator
(on:  red, off:  no light)
Remote control sensor within 
about 23 feet (7 meters) in 
front of the TV setPOWER button 
						

							1213
First Time Setup
First time setup screen is displayed only when the TV is turned on for the first time after the power cord is 
inserted into a wall outlet and when “Auto power on” (p. 17) is \
set to “No”.
orTurn the TV On with the POWER button
or
(Remote)
(TV)
Configure your viewing mode
 Select your languageLanguage / Idioma / Langue
English Español Français select
 OK
 Select your viewing mode (Be sure to select “Home use”)Set viewing mode
Step 2 of 6
Please select your viewing environment.
Select “Home Use” when using this TV in your
home.
Home UseStore Demonstration
OK
RETURN
Select
 select
 OK
  Please confirm your selection (Home Use) before pressing OK button.
 If you select “Store Demonstration” by mistake in , 
confirmation screen will be displayed.
No
You are selecting the store demonstration mode.
If you select “Yes”, the picture mode will regularly reset
to “Vivid” and a Picture Refresh message will be displayed on the 
screen.Ye s select
 OK
  Select “No” and return to previous screen .  If you select “Yes”, Screen enters the store demonstration mode.
To display the “Set viewing mode” screen again as shown above and s\
elect 
“Home Use”, do one of the following:
• Press and hold down the front POWER button for at least five second\
s.
• Unplug power cord for 30 seconds and plug it again.
Note
  is not available on  - .
  is not available on .
  When you have used  to turn the TV off, the next time you turn the TV on the 
“Language” settings will be displayed.
  If you use any other step other than  to turn the TV off, or if you used the EXIT 
button to quit before completing the settings, the next time you turn th\
e TV on “First 
time setup” will not be automatically displayed. 
• The settings up to that point are saved.
• You can reset the settings using “First time setup”. (p. 17)
  To change the setting (Language, ANT/Cable setup, Input labels, Clock) later, go to  the Menu screen (p. 17)
 
 Press to return to 
the previous screen
Auto channel setup (ANT/Cable setup) Select the connected Antenna in terminalANT/Cable setup Step 3 of 6
Select “Not used” when viewing TV via
Satellite receiver or Cable box. Note: Select
“Cable” when viewing via Cable DTA Box.
CableAntenna Not used
ANTENNA
Cable In
ANTENNACable In
OK
RETURN
Select
 select
 OK
Not used: Go to  (Label 
inputs)
Select “Not used” when no wire is connected to the “Antenna/Cab\
le” terminal.  Typical when a Cable/Satellite box is connected to a TV input.  Prevents accidental tuning to an unavailable signal.
 Select “Start”Auto program
Step 4 of 6
Start scanning for channels via the TV’s
built-in tuner. Select “Skip” when viewing TV
channels via Satellite receiver or Cable box.
StartSkip
OK
RETURN
Select
 select
 OK
Skip: Go to  (Label inputs)
Start scanning the channels 
(Available channels are automatically set.)
Auto programProgressNumber of analog channels
Number of digital channels
Press RETURN to quit
8%10
0
RETURN
 Complete the Auto program setup Completion message is displayed when the Auto program scan is successfully 
completed.
Auto program
Auto program completed. Press OK to continue.
Number of analog channels
Number of digital channels10
0
OK
RETURN
OKIf there is no available 
channel, return to  -  
(ANT/ Cable setup).
“Not used” will be selected.
 Operation of the EXIT button during “First time setup”
Press the button once to display confirmation screen. Press again to clo\
se 
confirmation screen.
[EXIT confirmation screen]
Are you sure you want to exit the First Time Setup?
To repeat the First Time Setup, select“First time setup” in the Setup Menu.Ye s NoYe s   Exit “First time setup”  
No  Return to the original screen 
						

							1213
First Time Setup
First time setup screen is displayed only when the TV is turned on for the first time after the power cord is 
inserted into a wall outlet and when “Auto power on” (p. 17) is \
set to “No”.
orTurn the TV On with the POWER button
or
(Remote)
(TV)
Configure your viewing mode
 Select your languageLanguage / Idioma / Langue
English Español Français select
 OK
 Select your viewing mode (Be sure to select “Home use”)Set viewing mode
Step 2 of 6
Please select your viewing environment.
Select “Home Use” when using this TV in your
home.
Home UseStore Demonstration
OK
RETURN
Select
 select
 OK
  Please confirm your selection (Home Use) before pressing OK button.
 If you select “Store Demonstration” by mistake in , 
confirmation screen will be displayed.
No
You are selecting the store demonstration mode.
If you select “Yes”, the picture mode will regularly reset
to “Vivid” and a Picture Refresh message will be displayed on the 
screen.Ye s select
 OK
  Select “No” and return to previous screen .  If you select “Yes”, Screen enters the store demonstration mode.
To display the “Set viewing mode” screen again as shown above and s\
elect 
“Home Use”, do one of the following:
• Press and hold down the front POWER button for at least five second\
s.
• Unplug power cord for 30 seconds and plug it again.
Note
  is not available on  - .
  is not available on .
  When you have used  to turn the TV off, the next time you turn the TV on the 
“Language” settings will be displayed.
  If you use any other step other than  to turn the TV off, or if you used the EXIT 
button to quit before completing the settings, the next time you turn th\
e TV on “First 
time setup” will not be automatically displayed. 
• The settings up to that point are saved.
• You can reset the settings using “First time setup”. (p. 17)
  To change the setting (Language, ANT/Cable setup, Input labels, Clock) later, go to  the Menu screen (p. 17)
 
 Press to return to 
the previous screen
Auto channel setup (ANT/Cable setup) Select the connected Antenna in terminalANT/Cable setup Step 3 of 6
Select “Not used” when viewing TV via
Satellite receiver or Cable box. Note: Select
“Cable” when viewing via Cable DTA Box.
CableAntenna Not used
ANTENNA
Cable In
ANTENNACable In
OK
RETURN
Select
 select
 OK
Not used: Go to  (Label 
inputs)
Select “Not used” when no wire is connected to the “Antenna/Cab\
le” terminal.  Typical when a Cable/Satellite box is connected to a TV input.  Prevents accidental tuning to an unavailable signal.
 Select “Start”Auto program
Step 4 of 6
Start scanning for channels via the TV’s
built-in tuner. Select “Skip” when viewing TV
channels via Satellite receiver or Cable box.
StartSkip
OK
RETURN
Select
 select
 OK
Skip: Go to  (Label inputs)
Start scanning the channels 
(Available channels are automatically set.)
Auto programProgressNumber of analog channels
Number of digital channels
Press RETURN to quit
8%10
0
RETURN
 Complete the Auto program setup Completion message is displayed when the Auto program scan is successfully 
completed.
Auto program
Auto program completed. Press OK to continue.
Number of analog channels
Number of digital channels10
0
OK
RETURN
OKIf there is no available 
channel, return to  -  
(ANT/ Cable setup).
“Not used” will be selected.
 Operation of the EXIT button during “First time setup”
Press the button once to display confirmation screen. Press again to clo\
se 
confirmation screen.
[EXIT confirmation screen]
Are you sure you want to exit the First Time Setup?
To repeat the First Time Setup, select“First time setup” in the Setup Menu.Ye s NoYe s   Exit “First time setup”  
No  Return to the original screen 
						

							1213
First Time Setup
First time setup screen is displayed only when the TV is turned on for the first time after the power cord is 
inserted into a wall outlet and when “Auto power on” (p. 17) is \
set to “No”.
orTurn the TV On with the POWER button
or
(Remote)
(TV)
Configure your viewing mode
 Select your languageLanguage / Idioma / Langue
English Español Français select
 OK
 Select your viewing mode (Be sure to select “Home use”)Set viewing mode
Step 2 of 6
Please select your viewing environment.
Select “Home Use” when using this TV in your
home.
Home UseStore Demonstration
OK
RETURN
Select
 select
 OK
  Please confirm your selection (Home Use) before pressing OK button.
 If you select “Store Demonstration” by mistake in , 
confirmation screen will be displayed.
No
You are selecting the store demonstration mode.
If you select “Yes”, the picture mode will regularly reset
to “Vivid” and a Picture Refresh message will be displayed on the 
screen.Ye s select
 OK
  Select “No” and return to previous screen .  If you select “Yes”, Screen enters the store demonstration mode.
To display the “Set viewing mode” screen again as shown above and s\
elect 
“Home Use”, do one of the following:
• Press and hold down the front POWER button for at least five second\
s.
• Unplug power cord for 30 seconds and plug it again.
Note
  is not available on  - .
  is not available on .
  When you have used  to turn the TV off, the next time you turn the TV on the 
“Language” settings will be displayed.
  If you use any other step other than  to turn the TV off, or if you used the EXIT 
button to quit before completing the settings, the next time you turn th\
e TV on “First 
time setup” will not be automatically displayed. 
• The settings up to that point are saved.
• You can reset the settings using “First time setup”. (p. 17)
  To change the setting (Language, ANT/Cable setup, Input labels, Clock) later, go to  the Menu screen (p. 17)
 
 Press to return to 
the previous screen
Auto channel setup (ANT/Cable setup) Select the connected Antenna in terminalANT/Cable setup Step 3 of 6
Select “Not used” when viewing TV via
Satellite receiver or Cable box. Note: Select
“Cable” when viewing via Cable DTA Box.
CableAntenna Not used
ANTENNA
Cable In
ANTENNACable In
OK
RETURN
Select
 select
 OK
Not used: Go to  (Label 
inputs)
Select “Not used” when no wire is connected to the “Antenna/Cab\
le” terminal.  Typical when a Cable/Satellite box is connected to a TV input.  Prevents accidental tuning to an unavailable signal.
 Select “Start”Auto program
Step 4 of 6
Start scanning for channels via the TV’s
built-in tuner. Select “Skip” when viewing TV
channels via Satellite receiver or Cable box.
StartSkip
OK
RETURN
Select
 select
 OK
Skip: Go to  (Label inputs)
Start scanning the channels 
(Available channels are automatically set.)
Auto programProgressNumber of analog channels
Number of digital channels
Press RETURN to quit
8%10
0
RETURN
 Complete the Auto program setup Completion message is displayed when the Auto program scan is successfully 
completed.
Auto program
Auto program completed. Press OK to continue.
Number of analog channels
Number of digital channels10
0
OK
RETURN
OKIf there is no available 
channel, return to  -  
(ANT/ Cable setup).
“Not used” will be selected.
 Operation of the EXIT button during “First time setup”
Press the button once to display confirmation screen. Press again to clo\
se 
confirmation screen.
[EXIT confirmation screen]
Are you sure you want to exit the First Time Setup?
To repeat the First Time Setup, select“First time setup” in the Setup Menu.Ye s NoYe s   Exit “First time setup”  
No  Return to the original screen 
						

							1415
Note
 About broadcasting systems
 Analog (NTSC):
     Conventional 
broadcasting
 Digital (ATSC):
     New 
programming 
that allows 
you to view 
more channels 
featuring 
high-quality video 
and sound
Select the Input labels (Label inputs)
Select NEXT then press OK to go to the next step.Label inputs
Step 5 of 6
Press RIGHT to select a label for each input.
Example: DVD, Blu-ray, etc. or “Not used”. 
Press OK to customize the label.Edit
Blu-ray, DVD ...
HDMI HDMI
RETURN
ChangeSelect HDMI 3
Component 1
Component 2
Video 1
Video 2
Next PC HDMI 1
HDMI 2
ABC
Delete
abcRGBY
[email protected] - ,LAST
 select
 setorOKRETURN
SelectABC
Delete
abcRGBY
[email protected] - ,LAST
Blu-rVideo 2
NEXTGAGA
Follow the instructions on 
screen to complete the 
following operations.
Label:  [BLANK] Not used/Blu-ray/DVD/DVD REC/HOME THTR/GAME/COMPUTER/
VCR/CABLE/SATELLITE/DVR/CAMERA/MONITOR/AUX/RECEIVER/MEDIA 
CTR/MEDIA EXT/OTHER
Adjust the Clock (Set clock) 
Select NEXT then press OK to go to the next step.Step 6 of 6
Edit
RETURN
ChangeSelect09
Set clock--
----
--
--Day
Hour
Minute
Next Year
Month
Current year.
 select
 setOK
RETURN
Select09
10Minute
Next10or
Follow the instructions on 
screen to complete the 
following operations.
Complete the First time setup 
Completion message is displayed when you have successfully completed the\
 
First time setup.
OK
RETURN
Setup is complete. Enjoy your  Panasonic VIERA TV.
Press OK to exit.
First Time Setup (Continued)How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and othe\
r functions so that you can enjoy 
watching TV best suited for you.
 Press to exit from a menu screen
 Press to return to the previous 
screen
 
Display the menu
  Shows the functions that can be adjusted.  Some functions will be disabled depending on  the type of input signal.
Edit
RETURN
ABC Delete
abc
Menu
RGBY
[email protected] - ,LASTChangeSelect
Select or enter the name of the device
connected to the HDMI 1 terminal.
Input labels
Component 1
Component 2
Video 1
Video 2
PC HDMI 2
HDMI 3 HDMI 1
Menu structure
Menu bar
Press OK to move to the Menu items.
Menu items
Press OK to proceed to next screen if 
available.
Help information
Operation guide
(example: Input labels)
Select the menu
Custom
Menu
0
0
Picture1/2
Brightness Picture mode
Contrast Reset to defaults
 select
 next
Select the item
Custom
Menu
Resets all picture adjustments to factory
default settings except for “Advanced
picture”.
0
0
0
0
0
Picture1/2
Brightness
Color
Tint
Sharpness Picture mode
Contrast Reset to defaults
(example:  Picture menu)
select
Adjust or select
Vivid
Menu
Selects from preset picture modes.
0
0
0
0
0
Picture1/2
Brightness
Color
Tint
Sharpness Picture mode
Contrast Reset to defaults
(example:  Picture menu)
adjust
or 
select 
						

							1415
Note
 About broadcasting systems
 Analog (NTSC):
     Conventional 
broadcasting
 Digital (ATSC):
     New 
programming 
that allows 
you to view 
more channels 
featuring 
high-quality video 
and sound
Select the Input labels (Label inputs)
Select NEXT then press OK to go to the next step.Label inputs
Step 5 of 6
Press RIGHT to select a label for each input.
Example: DVD, Blu-ray, etc. or “Not used”. 
Press OK to customize the label.Edit
Blu-ray, DVD ...
HDMI HDMI
RETURN
ChangeSelect HDMI 3
Component 1
Component 2
Video 1
Video 2
Next PC HDMI 1
HDMI 2
ABC
Delete
abcRGBY
[email protected] - ,LAST
 select
 setorOKRETURN
SelectABC
Delete
abcRGBY
[email protected] - ,LAST
Blu-rVideo 2
NEXTGAGA
Follow the instructions on 
screen to complete the 
following operations.
Label:  [BLANK] Not used/Blu-ray/DVD/DVD REC/HOME THTR/GAME/COMPUTER/
VCR/CABLE/SATELLITE/DVR/CAMERA/MONITOR/AUX/RECEIVER/MEDIA 
CTR/MEDIA EXT/OTHER
Adjust the Clock (Set clock) 
Select NEXT then press OK to go to the next step.Step 6 of 6
Edit
RETURN
ChangeSelect09
Set clock--
----
--
--Day
Hour
Minute
Next Year
Month
Current year.
 select
 setOK
RETURN
Select09
10Minute
Next10or
Follow the instructions on 
screen to complete the 
following operations.
Complete the First time setup 
Completion message is displayed when you have successfully completed the\
 
First time setup.
OK
RETURN
Setup is complete. Enjoy your  Panasonic VIERA TV.
Press OK to exit.
First Time Setup (Continued)How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and othe\
r functions so that you can enjoy 
watching TV best suited for you.
 Press to exit from a menu screen
 Press to return to the previous 
screen
 
Display the menu
  Shows the functions that can be adjusted.  Some functions will be disabled depending on  the type of input signal.
Edit
RETURN
ABC Delete
abc
Menu
RGBY
[email protected] - ,LASTChangeSelect
Select or enter the name of the device
connected to the HDMI 1 terminal.
Input labels
Component 1
Component 2
Video 1
Video 2
PC HDMI 2
HDMI 3 HDMI 1
Menu structure
Menu bar
Press OK to move to the Menu items.
Menu items
Press OK to proceed to next screen if 
available.
Help information
Operation guide
(example: Input labels)
Select the menu
Custom
Menu
0
0
Picture1/2
Brightness Picture mode
Contrast Reset to defaults
 select
 next
Select the item
Custom
Menu
Resets all picture adjustments to factory
default settings except for “Advanced
picture”.
0
0
0
0
0
Picture1/2
Brightness
Color
Tint
Sharpness Picture mode
Contrast Reset to defaults
(example:  Picture menu)
select
Adjust or select
Vivid
Menu
Selects from preset picture modes.
0
0
0
0
0
Picture1/2
Brightness
Color
Tint
Sharpness Picture mode
Contrast Reset to defaults
(example:  Picture menu)
adjust
or 
select 
						

							1617
 Menu list
Menu ItemAdjustments/Configurations (alternatives)
Picture
Reset to defaults*Resets all picture adjustments to factory default settings except for “\
Advanced picture”.
Picture modeBasic picture mode. (Vivid/Standard/Cinema/Custom)
Contrast, Brightness,
Color, Tint, SharpnessAdjusts the color, brightness, etc. for each picture mode to suit your taste.
• Display range
  Contrast/Brightness/Color/Sharpness: 0 - 100
  Tint:           -50 - +50
Color temp.Selects a choice of Cool (blue), Normal, or Warm (red) color.  (Cool/Normal/Warm)
x.v.ColorAuto: Provides the appropriate picture when images corresponding to “\
x.v.Color” are input 
via the HDMI input of this TV. (Off/Auto)
C.A.T.S.Adjusts the brightness and gradation according to the ambient lighting c\
ondition.  (Off/On)
Video NRReduces noise, commonly called snow. Leave it off when receiving a strong signal.  (Off/On)
Aspect adjustmentsScreen formatChanges the format (aspect ratio). (FULL/H-FILL/JUST/4:3/ZOOM)
Lets you choose the aspect depending on the format of received signal.
HD size
Selects between 95 % (Size 1) or 100 % (Size 2) for the scanning are\
a with High-definition 
signal. (Size 1/Size 2)
Select “Size 1” if noise is generated on the edges of the screen.
• Size 1: Selected item for “HD size”. Scanning 95 %
• Size 2: Selected item for “HD size”. Scanning 100 %
H sizeAdjusts the horizontal display range to reduce noise of both side edges \
of an image. (Size 1/Size 2)Size 2: Adjusts the image size according to the aspect mode to reduce noise.
Zoom 
adjustmentsAdjusts vertical alignment and size when aspect setting is “ZOOM”.\
PC adjustmentsSet PC display.
Advanced picture3D Y/C filter Minimizes noise and cross-color in the picture.  (Off/On) 
Color matrixSelects image resolution of component-connected devices.  (SD/HD)
• SD:  Standard Definition       HD:  High Definition
• Only used with 480p video signal.
MPEG NRReduces noise of specific digital signals of DVD, STB, etc. (Off/On)
Black levelSelects Dark or Light. Valid only for external input signals. (Dark/Light)
3:2 pulldownAdjusts the picture recorded in 24 fps for optimum quality. (Off/On/Auto)
Audio
Reset to defaults*Resets Bass, Treble, and Balance adjustments to factory default settings.
BassIncreases or decreases the bass response.
TrebleIncreases or decreases the treble response.
BalanceEmphasizes the left / right speaker volume.
Advanced audioSurroundEnhances audio response when listening to stereo. (Off/On)
Volume levelerMinimizes volume disparity after switching to external inputs.
TV speakersSwitches to “Off” when using external speakers. (Off/On)
• “Surround” and “Volume leveler” do not work if “Off” is selected.
HDMI 1 in
HDMI 2 in
HDMI 3 inThe default setting is “Digital” for the HDMI connection. (Digita\
l input signal) 
Select audio input terminal when DVI cable is connected. (Analog audio \
input signal)
(Digital/Component 1/Component 2/Video 1/Video 2)
TimerSleep, Timer 1-5The TV can automatically turn On/Off at the designated date and time.
LockLocks the channels and programs.Closed 
caption
Closed captionDisplays subtitles (Closed caption).
  In the AV mode, the Audio and Setup menus give fewer options.
 *  Confirmation screen is displayed. Select “Yes” and press OK to reset.
 Menu list
Menu Item Adjustments/Configurations (alternatives)
Setup
Channel surf modeSets the mode to select the channel with the Channel up/down button. 
(All/Favorite/Digital only/Analog only)
• Favorite: Only channels registered as FAVORITE.
LanguageSelects the screen menu language.
ClockAdjusts the clock.
ANT/Cable setupSets channels.
Input labelsSelects the terminal and label of the external equipment.
Anti Image 
retentionPixel orbiter
Prevents “Image retention” with Wobbling. ( Automatic/Periodic)
• Automatic: Shifts the display image automatically.
• Periodic: Shifts the display image every (1/2/3/4) minutes according to what was\
 set in 
the “Time (minutes)” menu.
Time (minutes)Sets the time for the “Pixel orbiter-Periodic” setting.  (1/2/3/4)
4:3 side barsChanges the brightness of the side bar. (Off/Dark/Mid/Bright) (4:3 mode only)
• The recommended setting is “Bright” to prevent the panel “Image\
 retention”.
Scrolling barPress “OK” to start the horizontal “Scrolling” on the screen\
.
VIERA Link settingsVIERA LinkControls the equipment connected to HDMI terminals.  (Off/On)
• “Power off link”, “Power on link”, “Energy saving mode”, “Unsel\
ected device energy save” 
and “Default speakers” cannot be selected if “Off” is set.
Power on linkSets “Power on link” of the HDMI connected equipment.  (No/Yes)
Power off linkSets “Power off link” of the HDMI connected equipment. (No/Yes)
Energy saving 
modeSets “Energy saving mode” of the HDMI connected equipment.  (Quick start/Save)
Unselected device 
energy saveSets “Unselected device energy save” of the HDMI connected equipme\
nt.
(No (stay on)/Yes (with prompt)/Yes (no prompt))
Default speakersSelects the default speakers. (TV/Theater)
ECO/energy savingNo signal for 10 
minutes
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION 
continue for more than 10 minutes.  (Stay on/Power TV off)
Note
• Not in use when “Auto power on”, “On/Off Timer” or “Lock” is set, or while “SD mode” or “Digital\
 
Channel” is selected.
• “No signal for 10 minutes was activated” will be displayed for abo\
ut 10 seconds when the TV 
is turned on for the first time after the power was turned off by “No signal for 10 minutes”.
• The on-screen display will flash 3, 2 and 1 to indicate the last three (\
3) remaining minutes 
prior to the shut-off.
No activity for 3 
hours
To conserve energy, the TV automatically turns off when no operation of remote and side 
panel key continues for more than 3 hours.  (Stay on/Power TV off)
Note
• Not in use when “Auto power on” or “On/Off Timer” is set, or while “PC input” is selected.
• “No activity for 3 hours was activated” will be displayed for abou\
t 10 seconds when the TV 
is turned on for the first time after the power was turned off by “No activity for 3 hours”.
• The on-screen display will flash 3, 2 and 1 to indicate the last three (\
3) remaining minutes 
prior to the shut-off.
Advanced  setup
Auto power onTurns TV On automatically when the cable box or connected device is turned On.\
  (No/Yes)
TV AC cord must be plugged into this device. TV turns on every time the power is restored.
• The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto \
power on” is set.
Image viewer 
auto playSets the “Thumbnail” or “Slideshow” to play back SD cards au\
tomatically. 
(Slideshow/Thumbnail/Set later/Off)
First time setupRestarts the first time setup from “Language” setting.
AboutDisplays TV version and software license.
Reset to defaultsPerforming Reset will clear all settings made with Setup, such as channe\
l settings.
 Sub menu list
Menu Item Adjustments/Configurations (alternatives)
Setup 
SUB MENUChannel surf modeSets the mode to select the channel with the Channel up/down button. 
(All/Favorite/Digital only/Analog only)
Set favoriteSets favorite channels.
Edit CH captionChanges the station identifier.
Signal meterChecks the signal strength if interference or freezing occurs on a digit\
al image.
How to Use Menu Functions(Continued) 
						

							1617
 Menu list
Menu ItemAdjustments/Configurations (alternatives)
Picture
Reset to defaults*Resets all picture adjustments to factory default settings except for “\
Advanced picture”.
Picture modeBasic picture mode. (Vivid/Standard/Cinema/Custom)
Contrast, Brightness,
Color, Tint, SharpnessAdjusts the color, brightness, etc. for each picture mode to suit your taste.
• Display range
  Contrast/Brightness/Color/Sharpness: 0 - 100
  Tint:           -50 - +50
Color temp.Selects a choice of Cool (blue), Normal, or Warm (red) color.  (Cool/Normal/Warm)
x.v.ColorAuto: Provides the appropriate picture when images corresponding to “\
x.v.Color” are input 
via the HDMI input of this TV. (Off/Auto)
C.A.T.S.Adjusts the brightness and gradation according to the ambient lighting c\
ondition.  (Off/On)
Video NRReduces noise, commonly called snow. Leave it off when receiving a strong signal.  (Off/On)
Aspect adjustmentsScreen formatChanges the format (aspect ratio). (FULL/H-FILL/JUST/4:3/ZOOM)
Lets you choose the aspect depending on the format of received signal.
HD size
Selects between 95 % (Size 1) or 100 % (Size 2) for the scanning are\
a with High-definition 
signal. (Size 1/Size 2)
Select “Size 1” if noise is generated on the edges of the screen.
• Size 1: Selected item for “HD size”. Scanning 95 %
• Size 2: Selected item for “HD size”. Scanning 100 %
H sizeAdjusts the horizontal display range to reduce noise of both side edges \
of an image. (Size 1/Size 2)Size 2: Adjusts the image size according to the aspect mode to reduce noise.
Zoom 
adjustmentsAdjusts vertical alignment and size when aspect setting is “ZOOM”.\
PC adjustmentsSet PC display.
Advanced picture3D Y/C filter Minimizes noise and cross-color in the picture.  (Off/On) 
Color matrixSelects image resolution of component-connected devices.  (SD/HD)
• SD:  Standard Definition       HD:  High Definition
• Only used with 480p video signal.
MPEG NRReduces noise of specific digital signals of DVD, STB, etc. (Off/On)
Black levelSelects Dark or Light. Valid only for external input signals. (Dark/Light)
3:2 pulldownAdjusts the picture recorded in 24 fps for optimum quality. (Off/On/Auto)
Audio
Reset to defaults*Resets Bass, Treble, and Balance adjustments to factory default settings.
BassIncreases or decreases the bass response.
TrebleIncreases or decreases the treble response.
BalanceEmphasizes the left / right speaker volume.
Advanced audioSurroundEnhances audio response when listening to stereo. (Off/On)
Volume levelerMinimizes volume disparity after switching to external inputs.
TV speakersSwitches to “Off” when using external speakers. (Off/On)
• “Surround” and “Volume leveler” do not work if “Off” is selected.
HDMI 1 in
HDMI 2 in
HDMI 3 inThe default setting is “Digital” for the HDMI connection. (Digita\
l input signal) 
Select audio input terminal when DVI cable is connected. (Analog audio \
input signal)
(Digital/Component 1/Component 2/Video 1/Video 2)
TimerSleep, Timer 1-5The TV can automatically turn On/Off at the designated date and time.
LockLocks the channels and programs.Closed 
caption
Closed captionDisplays subtitles (Closed caption).
  In the AV mode, the Audio and Setup menus give fewer options.
 *  Confirmation screen is displayed. Select “Yes” and press OK to reset.
 Menu list
Menu Item Adjustments/Configurations (alternatives)
Setup
Channel surf modeSets the mode to select the channel with the Channel up/down button. 
(All/Favorite/Digital only/Analog only)
• Favorite: Only channels registered as FAVORITE.
LanguageSelects the screen menu language.
ClockAdjusts the clock.
ANT/Cable setupSets channels.
Input labelsSelects the terminal and label of the external equipment.
Anti Image 
retentionPixel orbiter
Prevents “Image retention” with Wobbling. ( Automatic/Periodic)
• Automatic: Shifts the display image automatically.
• Periodic: Shifts the display image every (1/2/3/4) minutes according to what was\
 set in 
the “Time (minutes)” menu.
Time (minutes)Sets the time for the “Pixel orbiter-Periodic” setting.  (1/2/3/4)
4:3 side barsChanges the brightness of the side bar. (Off/Dark/Mid/Bright) (4:3 mode only)
• The recommended setting is “Bright” to prevent the panel “Image\
 retention”.
Scrolling barPress “OK” to start the horizontal “Scrolling” on the screen\
.
VIERA Link settingsVIERA LinkControls the equipment connected to HDMI terminals.  (Off/On)
• “Power off link”, “Power on link”, “Energy saving mode”, “Unsel\
ected device energy save” 
and “Default speakers” cannot be selected if “Off” is set.
Power on linkSets “Power on link” of the HDMI connected equipment.  (No/Yes)
Power off linkSets “Power off link” of the HDMI connected equipment. (No/Yes)
Energy saving 
modeSets “Energy saving mode” of the HDMI connected equipment.  (Quick start/Save)
Unselected device 
energy saveSets “Unselected device energy save” of the HDMI connected equipme\
nt.
(No (stay on)/Yes (with prompt)/Yes (no prompt))
Default speakersSelects the default speakers. (TV/Theater)
ECO/energy savingNo signal for 10 
minutes
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION 
continue for more than 10 minutes.  (Stay on/Power TV off)
Note
• Not in use when “Auto power on”, “On/Off Timer” or “Lock” is set, or while “SD mode” or “Digital\
 
Channel” is selected.
• “No signal for 10 minutes was activated” will be displayed for abo\
ut 10 seconds when the TV 
is turned on for the first time after the power was turned off by “No signal for 10 minutes”.
• The on-screen display will flash 3, 2 and 1 to indicate the last three (\
3) remaining minutes 
prior to the shut-off.
No activity for 3 
hours
To conserve energy, the TV automatically turns off when no operation of remote and side 
panel key continues for more than 3 hours.  (Stay on/Power TV off)
Note
• Not in use when “Auto power on” or “On/Off Timer” is set, or while “PC input” is selected.
• “No activity for 3 hours was activated” will be displayed for abou\
t 10 seconds when the TV 
is turned on for the first time after the power was turned off by “No activity for 3 hours”.
• The on-screen display will flash 3, 2 and 1 to indicate the last three (\
3) remaining minutes 
prior to the shut-off.
Advanced  setup
Auto power onTurns TV On automatically when the cable box or connected device is turned On.\
  (No/Yes)
TV AC cord must be plugged into this device. TV turns on every time the power is restored.
• The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto \
power on” is set.
Image viewer 
auto playSets the “Thumbnail” or “Slideshow” to play back SD cards au\
tomatically. 
(Slideshow/Thumbnail/Set later/Off)
First time setupRestarts the first time setup from “Language” setting.
AboutDisplays TV version and software license.
Reset to defaultsPerforming Reset will clear all settings made with Setup, such as channe\
l settings.
 Sub menu list
Menu Item Adjustments/Configurations (alternatives)
Setup 
SUB MENUChannel surf modeSets the mode to select the channel with the Channel up/down button. 
(All/Favorite/Digital only/Analog only)
Set favoriteSets favorite channels.
Edit CH captionChanges the station identifier.
Signal meterChecks the signal strength if interference or freezing occurs on a digit\
al image.
How to Use Menu Functions(Continued) 
						

							1819
FA Q
Before requesting service or assistance, please follow these simple guid\
es to resolve the problem.
If the problem still persists, please contact your local Panasonic deale\
r or Panasonic Service Center for assistance. For 
details
For additional assistance, please contact us via the website at: 
www.panasonic.com/contactinfo
www.panasonic.ca
White spots or
shadow images
(noise)
  Check the position, direction,and connection of the antenna.
Interference or 
frozen digital 
channels
(intermittent sound)
  Change the direction of antenna for digital channels.
  Check “Signal meter”.If the signal is weak, check the
antenna and consult your local
dealer.
The remote control 
does not work
  Are the batteries installed correctly?  Are the batteries new?
Pictures from external 
equipment are distorted 
when the unit is 
connected via HDMI
  Is the HDMI cable connected properly?  Turn Off the TV unit and equipment, then  turn them On again.
  Check an input signal from the equipment.   Use equipment compliant with EIA/CEA-861/861B.
When the channel is changed on 
an STB that is connected with 
HDMI, “HDMI” may be displayed 
on the top left of the screen
  This is not a malfunction.
Recording does not 
start immediately
  Check the settings of the recorder. For details, read the manual of the recorder. If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry \
out the 
suggested check. If this does not solve the problem, please contact your\
 local Panasonic dealer, quoting the model 
number and serial number (both found on the rear of the TV).
No sound is produced
Sound is unusual
  Are the speaker cables connected correctly?  Is “Sound Mute” active?  Is the volume set to the minimum?  Is “TV speakers” set to “Off”?  Change “SAP” settings.  Check “HDMI 1 in”, “HDMI 2 in” or “HDMI 3 in” settings\
.
  Set “SAP” setting to “Stereo” or “Mono”.  Check the HDMI device connected to the unit.  Set the audio setting of the HDMI device to “Linear PCM”.  If digital sound connection has a problem,
select analog sound connection.
Problem Actions
“VIERA” logo moves on 
the screen
Screen
Some spots remain 
bright or dark
Chaotic image, noisy
No image is
displayed on screen
Only spots are displayed 
instead of images
Neither image nor
sound is produced
  The function to prevent “Image retention” is activated.
(Not a faulty symptom)
• The screen saver is activated if the TV unit is not operated 
for a certain time in SD mode.
• “Image retention”
  The Plasma panel is made up of a few million pixels and is produced with advanced technology through an intricate 
process. Sometimes a few pixels may be bright or dark. 
These pixels do not indicate a defective panel and will have 
no impact on the performance of the TV.
  Check nearby electrical products.(car or motorcycle ignition systems, fluorescent lamp, etc.)
  Check Picture menu  Check the cable connections.  Check that the correct input has been selected.
  Check the channel settings.  Check the antenna cables.
  Is the AC power cord plugged into the outlet?  Is the TV unit turned On?  Check Picture menu and volume.  Check the AV cable connections.  Check that the correct input has been selected.
Black Box appears  Change settings of Closed Caption (CC).
Sound TV set
Parts of the TV set 
become hot  Even when the temperature of parts of the front, top and 
rear panels has risen, these temperature rises will not pose 
any problems in terms of performance or quality.
Unknown sound heard
1- 
Sounds from TV cabinet
2- Tick/Click sound
3- Buzzing sound
1- Changes in the temperature and humidity of the room may cause 
the TV’s cabinet to expand or contract and produce metallic 
sounds. This is not a sign of faulty operation or a malfunction.
2-  When the TV is powered on, an electrical component in the  TV activates producing a tick/click sound. This is not a sign of 
faulty operation or a malfunction.
3- Electrical circuits are active while the TV set is on.  This is not a sign of faulty operation or a malfunction. 
						

							1819
FA Q
Before requesting service or assistance, please follow these simple guid\
es to resolve the problem.
If the problem still persists, please contact your local Panasonic deale\
r or Panasonic Service Center for assistance. For 
details
For additional assistance, please contact us via the website at: 
www.panasonic.com/contactinfo
www.panasonic.ca
White spots or
shadow images
(noise)
  Check the position, direction,and connection of the antenna.
Interference or 
frozen digital 
channels
(intermittent sound)
  Change the direction of antenna for digital channels.
  Check “Signal meter”.If the signal is weak, check the
antenna and consult your local
dealer.
The remote control 
does not work
  Are the batteries installed correctly?  Are the batteries new?
Pictures from external 
equipment are distorted 
when the unit is 
connected via HDMI
  Is the HDMI cable connected properly?  Turn Off the TV unit and equipment, then  turn them On again.
  Check an input signal from the equipment.   Use equipment compliant with EIA/CEA-861/861B.
When the channel is changed on 
an STB that is connected with 
HDMI, “HDMI” may be displayed 
on the top left of the screen
  This is not a malfunction.
Recording does not 
start immediately
  Check the settings of the recorder. For details, read the manual of the recorder. If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry \
out the 
suggested check. If this does not solve the problem, please contact your\
 local Panasonic dealer, quoting the model 
number and serial number (both found on the rear of the TV).
No sound is produced
Sound is unusual
  Are the speaker cables connected correctly?  Is “Sound Mute” active?  Is the volume set to the minimum?  Is “TV speakers” set to “Off”?  Change “SAP” settings.  Check “HDMI 1 in”, “HDMI 2 in” or “HDMI 3 in” settings\
.
  Set “SAP” setting to “Stereo” or “Mono”.  Check the HDMI device connected to the unit.  Set the audio setting of the HDMI device to “Linear PCM”.  If digital sound connection has a problem,
select analog sound connection.
Problem Actions
“VIERA” logo moves on 
the screen
Screen
Some spots remain 
bright or dark
Chaotic image, noisy
No image is
displayed on screen
Only spots are displayed 
instead of images
Neither image nor
sound is produced
  The function to prevent “Image retention” is activated.
(Not a faulty symptom)
• The screen saver is activated if the TV unit is not operated 
for a certain time in SD mode.
• “Image retention”
  The Plasma panel is made up of a few million pixels and is produced with advanced technology through an intricate 
process. Sometimes a few pixels may be bright or dark. 
These pixels do not indicate a defective panel and will have 
no impact on the performance of the TV.
  Check nearby electrical products.(car or motorcycle ignition systems, fluorescent lamp, etc.)
  Check Picture menu  Check the cable connections.  Check that the correct input has been selected.
  Check the channel settings.  Check the antenna cables.
  Is the AC power cord plugged into the outlet?  Is the TV unit turned On?  Check Picture menu and volume.  Check the AV cable connections.  Check that the correct input has been selected.
Black Box appears  Change settings of Closed Caption (CC).
Sound TV set
Parts of the TV set 
become hot  Even when the temperature of parts of the front, top and 
rear panels has risen, these temperature rises will not pose 
any problems in terms of performance or quality.
Unknown sound heard
1- 
Sounds from TV cabinet
2- Tick/Click sound
3- Buzzing sound
1- Changes in the temperature and humidity of the room may cause 
the TV’s cabinet to expand or contract and produce metallic 
sounds. This is not a sign of faulty operation or a malfunction.
2-  When the TV is powered on, an electrical component in the  TV activates producing a tick/click sound. This is not a sign of 
faulty operation or a malfunction.
3- Electrical circuits are active while the TV set is on.  This is not a sign of faulty operation or a malfunction.