Panasonic 55"65" Class 1080p Plasma Hdtv Tc P55vt50 Owners Manual

							11
Connections
Connection Panels
VHF/UHF Antenna•  NTSC (National Television System Committee):ATSC (Advanced Television Systems Committee):
Digital TV Standards include digital high-definition television (HDTV), standa\
rd-definition television 
(SDTV), data broadcasting, multi-channel surround sound audio and inte\
ractive television.
  Antenna or Cable connection
 Cable 
●You need to subscribe to a cable TV service to enjoy viewing their programming. 
●You may need to subscribe to a high-definition (HD) cable service to en\
joy HD programming. 
The connection for high-definition can be done with the use of an HDMI o\
r Component Video cable. (p. 12)
Note
 
●When using a Cable box, external equipment and video cables shown in thi\
s manual are not supplied with the TV. 
●When disconnecting the power cord, be absolutely sure to disconnect the \
power cord plug from the wall outlet first. 
●For additional assistance, visit us at:   www.panasonic.com/help
www.panasonic.ca
Power Cord
(Connect after all the 
other connections have 
been made.)Back of the TV
Cable TV
VHF/UHF Antenna
or
SD card 
slot 
Back of the TV
USB1/2/3 
terminal
Ethernet
connector
 
●For , ,  connections, please refer to 
p. 12
PC 
terminal
UD@Q@@75@FOH@JOEE


 UD@Q@@75@FOH@JOEE










 
						

							12
  AV cable connection
Best
Good
Basic
(Not HD)
 To use  HDMI terminals
L
R
HDMI
AV OUT
HDMI-DVI 
Conversion cable DVI OUT
AUDIO OUTe.g. Blu-ray Disc 
player
e.g. Blu-ray Disc 
player
AV Equipment
AV Equipment
Component/AV 
adapter (not in use)
white white
red red
 To use  COMPONENT terminals
L
R Y
P
B
PR
AUDIO
OUT
COMPONENT
VIDEO OUT
white red
green
bluered
white
red red
blue
green/
yellow
whitered
green
bluered e.g. Blu-ray Disc 
playerAV Equipment
white
red
red
blue
green
Component/AV  
adapter
 To use  COMPOSITE terminals
L
RCOMPOSITE
OUT
yellow white red
yellow
white
red or
e.g. DVD Recorder
AV Equipment
e.g. VCR
Component/AV  
adapter
white
red
green/
yellow
(not in use)
white
redyellow
Note
 
●In some cases, it is not possible to connect depending on the type of ca\
ble or equipment. 
●The Green/Yellow terminal is shared for both the COMPONENT and COMPOSITE (VIDEO IN) 
connection. When using COMPOSITE (VIDEO IN) connection, the Yellow connector (Video) should be 
inserted into Green/Yellow connection.
  Input select:  
Comp.
Videoselect
   (For more details, please refer to eHELP (p. 19). )
UD@Q@@75@FOH@JOEE


 UD@Q@@75@FOH@JOEE


 






 
						

							13
  Audio connection
DIGITAL 
AUDIO INe.g. Amplifier Audio equipmentOptical cable
  PC / Computer connection (VGA)
PC OUT Computer
RGB PC cable Audio cable
Connect cable which matches the 
audio out terminal on the computer
Audio OUT
Conversion adapter
(if necessary)
white whitered red
Component/AV adapter
(not in 
use)
  Cable Binding Instructions
(image)
To attachhole
Insert
To bundle
To remove
To loosen Keep pushing 
both sides till 
they snap snaps
Set
hooks knobKeep pushing 
the knob
Cable clamper
 
●Do not bundle the Antenna cable and AC cord together (could cause distorted image). 
●Fasten the cables with the Cable clamper as necessary. 
●When using the options, follow the option’s assembly manual to fix cables.
UD@Q@@75@FOH@JOEE


 UD@Q@@75@FOH@JOEE


 






 
						

							14
Identifying Controls
Note
 
●The TV consumes a small amount of electric energy even when turned off. 
●Do not place any objects between the TV remote control sensor and remote control.
TV controls/indicators
 Remote control
Front of the TV Back of the TV
Volume up/down
 Power indicator
(on:  red, off:  no light) Selects channels 
in sequence
Remote control sensor within about 23 feet 
(7 meters) in front of the TV set
C.A.T.S. sensor
Plasma C.A.T.S. (Contrast 
Automatic Tracking System) 
Switches TV On or Off (Standby)
Displays 3D settings. (p. 18)
Select source to watch
Displays or removes the information banner
Displays Main Menu
Displays Option Menu for special 
functions (when available)
Colored buttons 
(used for various functions)
Sound Mute On/Off
Changes aspect ratio and zoom 
Volume up/down
Switches to previously viewed 
channel or input
External equipment operations  Closed caption On/Off
Lights the buttons for 5 seconds 
Press again to turn off the button lights 
Selects Secondary Audio  Programming
Exits from Menu screen
Displays VIERA Connect Home screen
Displays VIERA TOOLS menu 
Selects/OK/Change
Go back to previous menu
Operates the Favorite channel list function
Viewing from external media (SD/USB)
Channel up/down, when viewing from ANT/
Cable source
Numeric keypad to select any channel or 
press to enter alphanumeric input in menus
Use for digital channels
Displays eHELP (built-in manual) (p. 19)
•  An image of the control panel is displayed on the screen while 
using it.
POWER button
Changes the input mode 
Chooses Menu and 
Submenu entries
(Press and hold down for 
MENU function)
UD@Q@@75@FOH@JOEE


 UD@Q@@75@FOH@JOEE


 






 
						

							15
VIERA Touch Pad Controller
The Touch Pad Controller is designed to facilitate TV operation, such as when accessing VIERA Connect or the Browser 
with the Touch Pad and free pointing system. It also covers other TV operations as a Remote controller.
  The Touch Pad Controller must be pointed toward the TV to turn on the power.(Only the Power-on switch works at first.)
  The TV can be paired with one Touch Pad Controller only.  Pair the Touch Pad Controller (p. 17)
■Parts names and functions
Power
Right button (OPTION)
Touch Pad
(Tap/Swipe/Trace the fringe to scroll)
Return
VIERA TOOLS button
(Displays VIERA TOOLS menu)/ 
On screen remote button
(Press and hold for On screen remote)
Channel up/down
Left button (OK)
Exit
Volume up/down
INTERNET button
(Displays VIERA Connect 
Home screen)
  These operations differ depending on the situation or condition.
Transmission Range:
Use the Touch Pad Controller within the range of 10.5 feet (3.2 m) from front s\
urface of the TV.
The range may be shortened if there are any obstacles or can be affected by the surrounding environment or building 
structure.
■Installing the remote’s batteries
Slide open
Close
Note the correct polarity 
(+ or -).
About caution for batteries, refer to 
p.10.
UD@Q@@75@FOH@JOEE


 UD@Q@@75@FOH@JOEE


 






 
						

							16
■Operating Touch Pad Controller
Touch Pad operations
Tap:
Tap center of the 
pad to OKSwipe:
Slide your finger to 
swipe.Trace the fringe to 
scroll.
 
●Some operations differ depending on the application.
Remote control with on-screen menuPressing and holding down the On screen remote button displays the remot\
e control panel. This will enable you to 
operate it as a Remote Controller.
(example)
 
●To change the display position (Right/Left) Press On screen remote button 
●To change the panel pattern Slide your finger (Swipe) to the right or left on the Touch Pad
UD@Q@@75@FOH@JOEE


 UD@Q@@75@FOH@JOEE


 






 
						

							17
First Time Setup
The first time setup screen is displayed only when the TV is turned on for the first time, after the power cord 
is inserted into a wall outlet and the “Auto power on” is set to “\
No”. 
(Press MENU 
--> Setup --> Advanced setup -->Auto power on )
or
Turn the TV on with the POWER button
or
(Remote)
(TV)
Setup the following items
 
●Select your language
 
●Select your country
 
●Select your viewing mode (Be sure to select “Home Use”)If you select “Store Demonstration” by mistake, confirmation scree\
n will be displayed.To display the “Set viewing mode” screen again and select “Home \
Use”, do one of 
the following:
•  Press and hold down the rear POWER button for at least five seconds.
•  Unplug power cord for 30 seconds and plug in again.
 
●ANT/Cable setup
Select and set the settings according to your ANT/Cable environment.  
Select “Yes” on the confirmation screen, to start the scanning process. 
After scanning is finished completely, press OK to continue.
 
●Label the inputs for easy identification
To name each input, follow the instructions on screen.
When this is done, select NEXT and press OK to go to the next step. 
 
●Configure Network settings
Select the Network type and select the setting mode. 
If you select “Wireless (WiFi)”, start “Wireless network sett\
ings”. 
Select “Automatic” or set “Manual” setting, start connection\
 test. 
When you complete “Network settings” successfully, the completion screen will be 
displayed. 
 
●Adjust the Clock
Select the clock mode and set other settings. 
When “Auto” is selected, clock will be set automatically according\
 to Time zone and DST. 
 
●Pair the Touch Pad Controller
To pair the Touch Pad Controller, hold the touch pad within 1.6 feet (50 cm) of the 
TV and simultaneously press and hold the Right button and INTERNET button on 
the Touch Pad Controller following the instructions on screen.
Then, follow the instructions on screen to complete the pairing.
When you complete this setting successfully, the completion message will be displayed.It also displays some operation methods such as Tap, Swipe and Trace the fringe 
to scroll, etc.
Tap (or press OK) to continue to next step.
•  To repeat these settings: Setup -> VIERA Touch Pad settings
Complete First time setupCompletion screen is displayed.
You can repeat the First time setup   • Press  MENU --
> Setup  --
> First time setup 
To watch TV via a Cable box, Satellite receiver, or any other source (DVD, DVR, 
gaming device, etc.), press the INPUT button and select the appropriate input. 
Panasonic does not guarantee operation and performance of peripheral dev\
ices made by 
other manufacturers; and we disclaim any liability or damage arising fro\
m operation and/or 
performance from usage of such other maker’s peripheral devices.
UD@Q@@75@FOH@JOEE


 UD@Q@@75@FOH@JOEE


 






 
						

							18
Precautions for Viewing 3D Images
 Cautions During Viewing   Do not use devices that emit strong electromagnetic waves (such as cell\
ular phones or personal transceivers) near the 
3D Eyewear.  Doing so may cause the 3D Eyewear to malfunction.
  If the 3D Eyewear is used in a room in which fluorescent lights (50 Hz)\
 are used, the light within the room may appear 
to flicker. In this case, either darken or switch off the fluorescent lights when using the 3D Eyewear.
  Wear the 3D Eyewear correctly. 3D images will not appear correctly if the 3D Eyewear is worn upside d\
own or back-to-front.
 For comfortable viewing  View from at least the recommended distance (3 times the effective height of the screen), 
  Recommended Distance:  
  For a 55-inch television, 6.89’ (2.1 m) or more. For a 65-inch television, 7.87’ (2.4 m) or more.
 
 When the top and bottom area of the screen are blackened, such as when p\
laying movies, view the screen at a distance 
3 times further than the height of the actual image. (That makes the vi\
ewing distance closer than above recommended 
distance.)
  Stop using the 3D Eyewear immediately if your skin feels unusual.
  In rare cases, the paint or materials used in the 3D Eyewear may cause a\
n allergic reaction.
  Stop using the 3D Eyewear immediately if you experience any redness, pai\
n, or itching on the nose or temples.
  Prolonged use may cause such symptoms due to excess pressure, which may \
result in the user feeling unwell.
  Use the 3D Eyewear where there is no interference from other devices wit\
h Bluetooth® signals.
Viewing 3D images
The following 3D content can be enjoyed on this TV:  •  A 3D Blu-ray disc, played on 3D capable Blu-ray player/recorder that is c\
onnected via HDMI cable.
•  3D TV broadcast (program)
•  3D Photo and 3D Movie taken by LUMIX/Camcorder.
•  3D game played on 3D capable video game console, connected via HDMI cabl\
e.
Optional Accessories (p. 8)
* For more detail on usage of 3D Eyewear (POWER button, Accessories and how to register, etc.), please refer to 
operating manuals for the purchased 3D Eyewear. 3D experience differs depending on the type of 3D Eyewear.
Using the 3D Eyewear Turn on the 3D Eyewear. Make sure that registration is finished completely.  Put on the 3D Eyewear.
Viewing 3D imagesWhen the HDMI receives information in which 3D mode is detected, 3D imag\
es are automatically displayed 
according to the signal.
If the 3D images are not displayed correctly, or if the images cause discomfort, the images can be adjusted by 
“3D format select” or “3D settings”.
 
●Change the view 3D ⇔
2D, 3D settings.
After Use Turn off the 3D Eyewear. After using the 3D Eyewear, store it in the case.
Change the view 3D⇔ 2D
 
■Simply switches 3D  ⇔
 2D images (Auto mode)
(example)
3D format select
3D
2D
 select
 OK
 
●  Switches to Manual mode 
Viewing 3D images on TV
UD@Q@@75@FOH@JOEE


 UD@Q@@75@FOH@JOEE


 






 
						

							19
Using eHELP (Built-in Manual)
Display eHELP[Top page]
When you enter eHELP again after exit, the confirmation screen is displayed while the TV is turned on.
You can select “TOP PAGE” or “LAST PAGE”.
 
●The eHELP icon is also available through VIERA TOOLS.
 select
 next
Select the desired page from the menu
Categories MenusSub menus Desired page
 select
 next
 select
 next
select
Change the menus using  ▲/ ▼
 To return to the previous menu/layer
 To exit eHELP
Operate eHELP
MenuPicture
Audio
Timer Lock
Setup
Network
Setup 1/2
ANT/Cable setupInput labels
Bluetooth settings
VIERA Touch Pad settings Channel surf mode
Language
ClockAll
3D settings
“Go to Menu” is available depending on the situation or condition.\
Display the Menu related to the explanation page after exiting eHELP.
eHELP (built-in manual) helps you understand how to easily operate the TV features by pressing the HELP 
button.
UD@Q@@75@FOH@JOEE


 UD@Q@@75@FOH@JOEE


 






      
						

							20
Frequently Asked Questions (FAQ)
Care and Cleaning
First, unplug the Power cord plug from the wall outlet.
Display panel
The front of the display panel has been specially treated. Wipe the pane\
l surface gently using only a cleaning cloth or a soft, lint-free cloth.  If the surface is particularly dirty, after cleaning up the dust, soak a soft, lint-free cloth in diluted, m\
ild liquid dish soap (1 part mild liquid dish soap diluted by 100 times the amount of water), and th\
en wring the cloth to remove excess liquid. Use this cloth 
to wipe the surface of the display panel, then wipe it evenly with a dry\
 cloth of the same type until the surface is dry.
  Do not scratch or hit the surface of the panel with fingernails or other\
 hard objects. Furthermore, avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the \
quality of the surface may be adversely affected.
Cabinet
If the cabinet becomes dirty, wipe it with a soft, dry cloth.  If the cabinet is particularly dirty, soak the cloth in diluted, mild liquid dish soap and then wring the cl\
oth dry. Use this cloth to  wipe the cabinet and then wipe it dry with a dry cloth.
  Do not allow any mild liquid dish soap to come into direct contact with \
the surface of the Plasma TV. If water droplets get inside the unit, operating problems may result.
  Avoid contact with volatile substances such as insect sprays, solvents, a\
nd thinner; otherwise, the quality of the cabinet surface may be adversely affected or the coating may peel off. 
  Do not let articles made from rubber or PVC be in contact with the TV for long periods of time.
Pedestal
 CleaningWipe the surfaces with a soft, dry cloth. If the unit is particularly di\
rty, clean it using a cloth soaked with water to which a small 
amount of mild liquid dish soap has been added and then wipe with a dry \
cloth.
Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating.\
 
(If using a chemically-treated cloth, follow the instructions supplied \
with the cloth.)
  Do not attach sticky tape or labels, as they can make the surface of the\
 pedestal dirty. Do not allow long-term contact with 
rubber, vinyl products, or the like. (Doing so will cause deterioration.)
Power cord plug
Wipe the plug with a dry cloth at regular intervals. (Moisture and dust\
 can lead to fire or electrical shock.)
Back panel (Cooling fan)
  The main unit is equipped with a cooling fan on the upper part of the ba\
ck side. To remove dust or other foreign materials adhering to the fan, vacuum it attaching lightly the opening of the suct\
ion nozzle of a vacuum cleaner to the vent holes.
 * Be extremely careful not to damage the display panel or other parts.
  If a message appears even after cleaning and then turning on, contact yo\
ur dealer or service center.
Questions Answers
Why doesn’t the Remote 
Control work? Check that the batteries are fresh, are of the same type and are install\
ed with the correct polarity (+ & -). To operate other devices, such as changing channels when using Cable, or \
Satellite boxes, 
or operating non-Panasonic Blu-ray players, use the remote supplied with\
 the device.
Why doesn’t the Touch Pad 
Controller work? Check that the batteries are fresh, are of the same type and are install\
ed with the correct polarity (+ & -). Check if the pairing range is within 1.6 feet (50 cm). Check if the Touch Pad Controller is pointed toward the TV to turn on the power.
Why is there no picture or just 
a blue, black or snowy screen 
being displayed?
  Check if the power cord is plugged in and the TV is turned on (front red LED light should 
be on, not blinking).
  Press the INPUT button on the remote to select the correct input source.  Ensure all connections are correct and secure.   When using external video source, such as a Cable/Satellite box or DVD p\
layer, check that the device is on and functioning correctly.
  Press MENU on the TV’s remote control. If the menu is displayed, then the TV is working; recheck above steps.
Why is the screen blank and the 
power indicator blinking? The TV has gone into shutdown mode to protect itself. Try unplugging it for a few minutes 
and connecting it again. If there was a temporary power surge on the AC line it may now 
be OK. If the  blinking returns, call 1-877-95-VIERA (U.S.A.) or 1-866-330-0014 (Canada).
How do I display eHELP (built-in Manual) ?  Press HELP on the TV’s remote control to display eHELP. (p. 19) 
UD@Q@@75@FOH@JOEE


 UD@Q@@75@FOH@JOEE