Panasonic 50" Class 720p Plasma Hdtv Th 50pe8 Quick Start Guide

							11
First Time Setup
“First time setup” is displayed only when the TV is turned on for the first time after the power cord is 
inserted into a wall outlet and when “Auto power on” is set to “\
No”.
or
■  Press to exit from 
a menu screen
 
■ Press to return 
to the previous 
screen 
Note
 To change setting  (Language/Clock/
Auto program) later, 
go to Menu screen
Turn the TV On with the POWER button
or
(Remote)
(TV)
 * This setting will be skipped next time if you select “Home”.
 Select your language
EnglishEspañolFrançaisLanguage select 
 ok
 Be sure to select “Home”
HomeStorePlease select your viewing environment. select 
 ok
 Please confirm your selection (Home) before pressing OK button.
■ If you select “Store” by mistake in , confirmation screen will be displayed.
Ye sNoYou are selecting the mode for store demonstration select 
 ok
 Select “No” and return to previous screen .
 If you select “Yes”, Screen enters store demonstration mode. Displays “Please 
select your viewing environment” screen once again as shown below. 
 Reselect “Home”. • Unplug the TV and plug it again.
•  Press and hold down the front POWER button.
Adjust the clock
First time setup
Auto program
Language
Clock
 next
 select
Clock
2008Year
Month
7
1
Day
Hour
10
10 AM
Minute
 set
 select item
Year:  Select the year
Month:  Select the month 
Day:  Select the day
Hour:  Adjust the hour 
Minute:  Adjust the minute
Go back to previous screen. 
						

							12
■ Press to exit from 
a menu screen
Auto channel setup
 Select “Auto program”
First time setup
Language
Clock
Auto program
 next
 select
 Select “ANT in”
Program channel
CableANT in
Auto
 set
 select
  ANT in  
Cable:  Cable TV
Antenna:  Antenna
 Select “Auto”
Program channel
CableANT in
Auto
 next
 select 
 Select scanning mode (ALL channels/Analog only/Digital only)
Auto program
All channels
Analog only
Digital only
 ok
 select
Auto programProgressNumber of analog channels
Number of digital channels8%100Press RETURN to quit.
RETURN
Start scanning the channels
 Available channels (analog/digital) are automatically set.
  All channels:  Scans digital and analog channels
  Analog only:  Scans Analog channels only
  Digital only:  Scans Digital channels only
 Confirm registered channels
Caption Favorite Add
ApplyCancelprogram
...
.
Ye s
...
.
Ye s
...
.
Ye s
 select “Apply”
 ok
 If OK is not pressed after selecting “Apply”, the channels will no\
t be saved.
The channel will be saved when no operation is performed for 60 seconds \
and 
the “Manual program” menu will also exit automatically.
 If you perform scanning more than twice, previously saved channels are e\
rased.
Note
 About broadcasting systems
 Analog (NTSC):  Conventional broadcasting
 Digital (ATSC):    New programming that allows you to view more channels 
featuring high-quality video and sound
First Time Setup (Continued) 
						

							13
Various menus allow you to make settings for the picture, sound, and othe\
r functions so that you can enjoy 
watching TV best suited for you.
■ Press to exit from 
a menu screen
■ Press to return 
to the previous 
screen
 
Display menu
 Displays the functions that can be set (varies depending on the input s\
ignal)
Select the menu
Menu
Audio
Lock
Setup SD card
CC
Timer Picture
VIERA Link
 select
 next
Select the item
Picture 1/2
Picture mode
Picture Reset
Brightness
Color
Vivid
0
0
0
Tint0
Sharpness0
(example:  Picture menu)
select
Adjust or select
Picture 1/2
Picture mode
PictureReset
Brightness
Color
Vivid
0
0
0
Tint0
Sharpness0
(example:  Picture menu)
adjust
or 
select
How to Use Menu Functions 
						

							14
 In AV mode, the Audio menu and Setup menu give fewer options.
MenuItem Adjustments/Configurations (alternatives)
VIERA Link
Record now
Stop recording
VIERA Link control 
Speaker output
[Record now/Stop recording]
Records programs on the recorder immediately with the TV’s remote control.
[VIERA Link control]
Selects equipment to access and operate.  (Recorder/Home theater/Player/Camcorder)  
[Speaker output]
Selects an audio output.  (Home theater/TV)
• VIERA Link menu is accessible directly by pressing the VIERA Link button on the remote control.  
Picture
ResetResets all picture adjustments to factory default settings except for “\
Advanced picture”.
Picture modeBasic picture mode (Vivid/Standard/Cinema/Game/Custom)
Picture, Brightness,
Color, Tint, Sharpness
Adjusts color, brightness, etc. for each picture mode to suit your taste
• Display range
     Picture/Brightness/Color/Sharpness:   0 - 100
     Tint:     -50 - +50
Color temp.Selects a choice of Cool(blue), Normal, or Warm(red) color.  (Cool/Normal/Warm)
Color mgmt.On:  Enhances green and blue color reproduction, especially outdoor scen\
es.  (On/Off) 
x.v.ColorAuto:   Provide the appropriate picture when images corresponding to “x.v.Color” are input 
via the HDMI input of this TV. (Off/Auto) 
Zoom adjustAdjusts vertical alignment and size when aspect setting is “ZOOM”Advanced pictureVideo NRReduces noise, commonly called snow. Leave it off when receiving a strong signal.  (Off/On)
3D Y/C filter Minimizes noise and cross-color in the picture. (On/Off) 
Color matrix
Selects image resolution of component-connected devices  (HD/SD)
• SD:  Standard Definition       HD:  High Definition
• Only 480p signal accepted; regular TV (NTSC) is not available.
MPEG NRReduces noise of specific digital signals of DVD, STB, etc. (On/Off)
Black levelSelects Dark or Light. Valid only for external input signals. (Dark/Light)
Audio
ResetResets Bass, Treble and Balance adjustments to factory default settings.
BassIncreases or decreases the bass response.
TrebleIncreases or decreases the treble response.
BalanceEmphasizes the left / right speaker volume.
Advanced audio
AI soundEqualizes overall volume levels across all channels and external inputs.\
  (On/Off)
SurroundEnhances audio response when listening to stereo. (On/Off)
Bass boostEnhances bass sound and provides powerful sound.  (On/Off)
• This setting will not function if “off” is set in “Speaker output”.
Audio levelerMinimizes volume disparity after switching to external inputs
Speaker outputSwitch to “Off” when using external speakers (On/Off)
• “AI sound”, “Surround”, and “Audio leveler” do not wor\
k if “Off” is selected
HDMI 1 in
HDMI 2 inThe default setting is “Digital” for HDMI connection. (Digital in\
put signal) 
Select audio input terminal when DVI cable is connected. (Analog audio \
input signal)
(Digital/Component 1/Component 2/Video 1/Video 2)
TimerSleep, Timer 1-5The TV can automatically turn On/Off at the designated date and time
LockLocks the channels and programs
SD
CardSD cardDisplays SD card data
CCCCDisplays subtitles (Closed Caption)
■ Menu list
How to Use Menu Functions  
						

							15
Menu ItemAdjustments/Configurations (alternatives)
Setup
Surf mode
Sets the mode to select the channel with Channel up/down button 
(All/Favorite/Digital only/Analog only)
• Favorite:  Only channels registered as FAVORITE
LanguageSelects the screen menu language
ClockAdjusts the clock
Program channelSets channelsExternal devices 
Input labelsSelects the terminal and label of the external equipment
Monitor out
[Component 1/Component 2/HDMI 1/HDMI 2/Video 1/Video 2]
To prevent howling and image oscillation, stops output of the pictures an\
d audio specified in 
this menu. (On/Off)
Anti image retention
Pixel orbiter
Prevents “Image retention” with Wobbling. (Automatic/Force)
• Automatic: Shifts the display image automatically.
• Force:    Shifts the display image every (1/2/3/4) minutes according to what was\
 set in the 
“Time” menu.
TimeSets the time for “Pixel orbiter-Force” setting. (1/2/3/4)
Side barChange the brightness of the side bar ( Off/Dark/Mid/Bright) (4:3 mode only)
• The recommended setting is “Bright” to prevent panel “Image ret\
ention”.
Scrolling barPress “OK” to start horizontal “Scrolling” on the screenVIERA Link setting
VIERA LinkControls equipment connected to HDMI terminals  (On/Off)
• “Power off link”, “Power on link”, and “Default speakers” cannot b\
e selected if “Off” is set.
Power off linkSets “Power off link” of HDMI connection equipment  (Set/No)
Power on linkSets “Power on link” of HDMI connection equipment  (Set/No)
Default speakersSelects the default speakers (TV/Theater)
Advanced setup
Auto power on
Turns TV On automatically when the cable box or a connected device is turned O\
n  (No/Set)
• The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto \
power on” 
is set.
No signal shut-off
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is 
performed for more than 10 minutes. (Set/No)
Note
• Not in use when setting “Auto power on”, “On/Off Timer”, “Lock”, “SD Mode”, or Digital 
channel.
• “No signal shut-off was activated” will be displayed for about 10 seconds when the TV is 
turned on for the first time after turning the power off by “No signal shut-off”.
• The on-screen display will flash 3, 2 and 1 to indicate the last three (\
3) remaining minutes 
prior to the shut-off.
No action shut-off
To conserve energy, the TV automatically turns off when no operation of remote or front panel 
key continues for more than 3 hours.  (No/Set)
Note
• Not in use when setting “Auto power on”, “On/Off Timer”.
• “No action shut-off was activated” will be displayed for about 10 seconds when the TV is 
turned on for the first time after turning the power off by “No action shut off”.
• The on-screen display will flash 3, 2 and 1 to indicate the last three (\
3) remaining minutes 
prior to the shut-off.
Play SD card 
automaticallySet “On” to play back SD cards automatically. (On/Off)
AboutDisplays TV version and software license.
ResetPerforming Reset will clear all items set with Setup, such as channel se\
ttings.
Menu Item Adjustments/Configurations (alternatives)
Setup 
SUB MENUSurf modeSets the mode to select the channel with Channel up/down button  (All/Favorite/Digital only/
Analog only)
Set favoriteSets favorite channels.
CCDisplays Closed Caption.  (Off/On)
Caption selectChanges the station identifier.
Signal meterChecks the signal strength if interference or freezing occurs on a digit\
al image.
■ Menu list
■ Sub menu list
(Continued) 
						

							16
-
SUBMENU
FA Q
Before requesting service or assistance, please follow these simple guid\
es to resolve the problem.
If the problem still persists, please contact your local Panasonic deale\
r or Panasonic Service Center for assistance.
For additional assistance, please contact us via the website at: 
www.panasonic.com/contactinfo
www.panasonic.ca
White spots or
shadow images
(noise)
 Check the position, direction,
and connection of the antenna.
Interference or 
frozen digital 
channels
(intermittent sound)
 Change the direction of antenna for digital channels.
 Check “Signal meter”.If the signal is weak, check the
antenna and consult your local
dealer.
The remote control does 
not work
 Are the batteries installed correctly?
 Are the batteries new?
Pictures from external 
equipment are distorted 
when the unit is 
connected via HDMI
 Is the HDMI cable connected properly?
 Turn Off the TV unit and equipment, then 
turn them On again.
 Check an input signal from the equipment.
 Use equipment compliant with 
EIA/CEA-861/861B.
Recording does not 
start immediately
 Check the settings of the recorder. For 
details, read the manual of the recorder. 
						

							17
If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry \
out the 
suggested check. If this does not solve the problem, please contact your\
 local Panasonic dealer, quoting the model 
number and serial number (both found on the rear of the TV).
No sound is produced
Sound is unusual
 Are the speakers’ cables connected correctly?
 Is “Sound Mute” active?
 Is the volume set to the minimum?
 Is “Speaker output” set to “Off”?
 Change “SAP” settings.
 Check “HDMI 1 in” or “HDMI 2 in” settings.
 Set “SAP” setting to “Stereo” or “Mono.”
 Check the HDMI device connected to the unit.
 Set the audio setting of the HDMI device to “Linear PCM.”
 If digital sound connection has a problem,
select analog sound connection.
ProblemActions
“Press any key to return” 
moves on the screen
Screen
Some spots remain 
bright or dark
Chaotic image, noisy
No image can be
displayed
Only spots are displayed 
instead of images
Neither image nor
sound is produced
 The function to prevent “Image retention” is activated.
(Not a faulty symptom)
 •  The screen saver is activated if the TV unit is not operated for 
a certain time in SD mode.
 
• “Image retention” (p. 3)
 The Plasma panel is made up of a few million pixels and 
is produced with advanced technology through an intricate 
process.  However, sometimes a few pixels may be bright 
or dark.  These pixels do not indicate a defective panel 
and will have no impact on the performance of the TV.
 Check nearby electrical products
(car, motorcycle, fluorescent lamp).
 Check Picture menu
 Check the cable connections.
 Check that the correct input has been selected.
 Check the channel settings.
 Check the antenna cables.
 Is the AC power cord plugged into the outlet?
 Is the TV unit turned On?
 Check Picture menu and volume.
 Check the AV cable connections.
 Check that the correct input has been selected.
Black Box appears Change settings of Closed Caption (CC).
Sound
Unknown sound heard
1-  Sounds from TV  cabinet
2- Whirring sound
3- Tick/Click sound
4- Buzzing sound1- Changes in the temperature and humidity of the room may cause 
the TV’s cabinet to expand or contract and produce metallic 
sounds. This is not a sign of faulty operation or a malfunction.
2- The TV may have a cooling fan that makes a soft whir. 
This is not a sign of faulty operation or a malfunction.
3- 
When the TV is powered on, an electrical component in the TV activates 
producing a tick/click sound. This is not a sign of faulty operation or a malfunction.
4- Electrical circuits are active while the TV set is on.  This is not a sign of faulty operation or a malfunction. 
						

							18
Limited Warranty Coverage
If your product does not work properly because of a defect in materials \
or workmanship, Panasonic Consumer 
Electronics Company (referred to as “the warrantor”) will, for t\
he length of the period indicated on the chart below, 
which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product 
with new or refurbished parts, or (b) replace it with a new or a refur\
bished product. The decision to repair or replace 
will be made by the warrantor.
During the “Labor” Limited Warranty period there will be no charge for labor. During the “Parts” Limited Warranty 
period, there will be no charge for parts.
You must carry-in your product or arrange for on-site service during the \
Limited Warranty period. If non-rechargeable 
batteries are included, they are not warranted. This Limited Warranty only applies to products purchased and 
serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and 
only covers product purchased as new. A purchase receipt or other proof of the original purchase date is requir\
ed for 
Limited Warranty service.
On-Site or Carry-in Service
For On-Site or Carry-In Service in the United States and Puerto Rico cal\
l 1-877-95-VIERA (1-877-958-4372).
On-site service where applicable requires clear, complete and easy access to the product by the authorized servicer 
and does not include removal or re-installation of an installed product.\
 It is possible that certain on-site repairs will not 
be completed on-site, but will require that the product or parts of the \
product, at the servicer’s discretion be removed 
for shop diagnosis and/or repair and then returned.
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NO\
T COVER 
normal wear and tear or cosmetic damage, nor does it cover markings or r\
etained images on the picture tube 
resulting from viewing fixed images (including, among other things, let\
terbox pictures on standard 4:3 screen TV’s, 
or non-expanded standard 4:3 pictures on wide screen TV’s, or onscreen data in a stationary and fixed location). 
The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused \
by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, bug 
infestation, mishandling, misapplication, alteration, faulty installatio\
n, set-up adjustments, misadjustment of consumer 
controls, improper maintenance, power line surge, lightning damage, modi\
fication, or commercial use (such as in a 
hotel, office, restaurant, or other business), rental use of the product, servic\
e by anyone other than a Factory Service 
Center or other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. 
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM 
THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As 
examples, this excludes damages for lost time, cost of having someone re\
move or re-install an installed unit if 
applicable, or travel to and from the servicer. The items listed are not exclusive, but are for illustration only.)  ALL 
EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE LIMITED WARRANTY OF MERCHANTABILITY, ARE 
LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or co\
nsequential damages, or limitations on how 
long an implied Limited Warranty lasts, so the exclusions may not apply to you.
This Limited Warranty gives you specific legal rights and you may also have others rig\
hts which vary from state 
to state. If a problem with this product develops during or after the Li\
mited Warranty period, you may contact your 
dealer or Service Center. If the problem is not handled to your satisfaction, then write to the \
warrantor’s Consumer 
Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE (INCLUDING COST OF AN ON-SITE SERVICE CALL, WHERE APPLICABLE) WHICH 
ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.
Limited Warranty (for U.S.A. and Puerto Rico only)
Panasonic Color Television Limited Warranty
CATEGORIES ALL PARTS EXCEPT
GLASS PANEL OR CRT LABOR GLASS PANEL OR CRT GLASS PANEL 
OR
CRT LABOR SERVICE
PLASMA DISPLAY
1 (ONE) YEAR1 (ONE) YEARGLASS PANEL - 2 (TWO) 
YEARS 1 (ONE) YEAR ON-SITE OR CARRY-IN
PANASONIC CONSUMER ELECTRONICS COMPANY,
DIVISION OF
PANASONIC CORPORATION OF NORTH AMERICA
One Panasonic Way
Secaucus, New Jersey 07094 
						

							19
Customer Services Directory (for U.S.A. and Puerto Rico)
Customer Services Directory (United Stated and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; 
purchase Parts and Accessories; or make Customer Service and Literature requests by visitin\
g our Web 
Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-877-95-VIERA (958-4372)
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
■For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United Stated and Puerto Rico)
Purchase Parts, Accessories and Instruction Books on line for all Panasonic Products by \
visiting our Web 
Site at:
http://www.pstc.panasonic.com
or, send your request by E-mail to: 
[email protected]
You may also contact us directly at: 
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday - Friday 9\
 am to 9 pm, EST.)
Panasonic Service and Technology Company
20421 84th Avenue South,
Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)
■For hearing or speech impaired TTY users, TTY: 1-866-605-1277 
						

							20
Limited Warranty (for Canada)
Panasonic Canada Inc.
PANASONIC PRODUCT - LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in m\
aterial and workmanship and agrees to 
remedy any such defect for a period as stated below from the date of ori\
ginal purchase.
In-home Service will be carried out only to locations accessible by road\
s and within 50 km of an authorized 
Panasonic service facility.
LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada or to \
any product which has been improperly 
installed, subjected to usage for which the product was not designed, mi\
sused or abused, damaged during shipping, 
or which has been altered or repaired in any way that affects the reliability or detracts from the performance, nor 
does it cover any product which is used commercially. Dry cell batteries are also excluded from coverage under this 
warranty.
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original 
purchase is required before warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, 
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL 
DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or l\
imitation of incidental or consequential 
damages, or the exclusion of implied warranties, so the above limitation\
s and exclusions may not be applicable.
In-home service requires clear, complete and easy access to the product by the Authorized Servicentre and does not 
include removal or re-installation of an installed product.  If removal \
is required to service the product, it will be at the 
discretion of the Servicentre and in no event will Panasonic Canada Inc.\
 or the Servicentre be liable for any special, 
indirect or consequential damages.
WARRANTY SERVICE
For product operation and information assistance,  please contact: 
    Our Customer Care Centre:  1-800 #:  1-866-330-0014
      Email link: www.vieraconcierge.ca
FOR PRODUCT REPAIRS, please contact Viera Customer Care Agent using the above contact info.
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in th\
e original carton. Include details of the defect claimed, and proof of date of original pur\
chase.
Plasma TV / Monitor In-home service One (1) year, parts (including Plasma Panel) and labour.
LCD TV (26 in. & over) In-home service One (1) year, parts (including LCD Panel) and labour.