Panasonic 50" Class 720p Plasma Hdtv Tc 50px34_en_om Owners Manual

							51
Support Information
 Technical Information
VIERA LinkTM “HDAVI ControlTM”  
HDMI connections to some Panasonic equipment allow you to interface auto\
matically. (p. 29) 
●This function may not work normally depending on the equipment condition\
. 
●The equipment can be operated by other remote controls with this functio\
n on even if the TV is in Standby mode. 
●Image or sound may not be available for the first few seconds when playb\
ack starts. 
●Image or sound may not be available for the first few seconds when input\
 mode is switched. 
●Volume function will be displayed when adjusting the volume of the equipm\
ent. 
●If you connect equipment that has “HDAVI Control 2 or later” function to the TV with an HDMI cable, the sound from the 
DIGITAL AUDIO OUT terminal can be output as multi-channel surround.
 
●“HDAVI Control 5” is the newest standard (current as of December, 2010) for the HDAVI Control compatible equipment.
This standard is compatible with the conventional HDAVI equipment.
 HDMI connection
HDMI (high-definition multimedia interface) allows you to enjoy high-d\
efinition digital images and high-quality sound by connecting 
the TV unit and HD devices.
HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, su\
ch as a Cable or Satellite box or a DVD player, can be 
connected to the HDMI connector using an HDMI compliant (fully wired) \
cable.
 
●HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard. 
●If the external equipment has only a DVI output, connect to the HDMI ter\
minal via a DVI to HDMI adapter cable (*2). 
●When the DVI to HDMI adapter cable is used, connect the audio cable to t\
he audio input terminal. 
●Audio settings can be made on the “HDMI 1 in” or “HDMI 2 in”\
 menu screen. (p. 45)
Applicable audio signal sampling frequencies (L.PCM):  48 kHz, 44.1 kH\
z, 32 kHz
  (*1):  The HDMI logo is displayed on an HDMI-compliant device. 
  (*2):  Enquire at your local digital equipment retailer shop.
Caution
 
●Use with a PC is not assumed. 
●All signals are reformatted before being displayed on the screen. 
●If the connected device has an aspect adjustment function, set the aspec\
t ratio to “16:9”. 
●These HDMI connectors are “type A”. 
●These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection. 
●A device having no digital output terminal may be connected to the input \
terminal of either “COMPONENT”, or “VIDEO” to 
receive analog signals.
 
●The HDMI input terminal can be used with only the following image signal\
s:  480i, 480p, 720p, 1080i and 1080p.
Match the output setting of the digital device.
 
●For details of the applicable HDMI signals, see p. 52.
DIGITAL AUDIO OUT terminal
You can enjoy your Home theater by connecting a Dolby Digital (5.1 chann\
el) decoder and “Multi Channel” amplifier to the 
DIGITAL AUDIO OUT terminals. 
Caution
 
●Depending on your DVD player and DVD-Audio software the copyright protec\
tion function may operate and disable optical 
output.
 
●When an ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When an NTSC 
channel is selected, the output will be PCM.
 
●When playing a movie on SD Card Movie player, when the sound has been recorded in Dolby Digital, the output from the\
 
DIGITAL AUDIO OUT terminal will be Dolby Digital. When the sound is recorded in other for\
mats, the output will be PCM.
 Closed Caption (CC)
 
●For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3; 
characters might be cut off).  
 
●The CC can be displayed on the TV only when the receiver (such as a Cable box or satellite receiver) \
has the CC set 
to ON within the device itself. Check with your Cable or Satellite provi\
der for instructions. The TV’s CC button does not 
operate the Satellite or Cable box’s CC function.
 
●If the CC is set to On on both the receiver and TV when the signal is 480i (except for the HDMI connection), the CC 
may overlap on the TV.
 
●If a digital program is being output in analog format, the CC data will \
also be output in analog format.  
●If the recorder or output monitor is connected to the TV, the CC needs to be set up on the recorder or output monitor. 
						

							52
4:3 side bars
Do not display a picture in 4:3 mode for an extended period, as this can\
 cause 
“Image retention” to remain on either or both sides of the display\
 field.
To reduce the risk of such “Image retention”, change the brightness\
 of the side 
bars.
See page 47 for more information
 
●The side bar may flash (alternate black/white) depending on the pictur\
e.
Side Bar
4:3
Screen
DisplayImage retention
PC Input Terminals
 
●Signal Names for D-sub 15P Connector
1 
678 
3 9 
45 10  15 14 13 12 11 2 
Pin No.Signal NamePin No.Signal NamePin No.Signal NameRGND (Ground)NC (not connected)GGND (Ground)NCBGND (Ground)HD/SYNCNC (not connected)NC (not connected)VDGND (Ground)GND (Ground)NCPin Layout for PC Input Terminal
Input signal that can be displayed
* Mark: Applicable input signal for Component (Y, PB, PR), HDMI and PC
horizontal frequency (kHz) vertical frequency (Hz) COMPONENT HDMI PC
525 (480) / 60i 15.7359.94
**
525 (480) /60p 31.4759.94**
750 (720) /60p 45.0059.94**
1,125 (1,080) /60i 33.7559.94**
1,125 (1,080)/60p 67.4359.94*
1,125 (1,080)/60p 67.5060.00*
1,125(1,080)/24p 26.9723.98*
1,125(1,080)/24p 27.0024.00*
640 × 400 @70 31.4770.08*
640 × 480 @60 31.4759.94*
Macintosh13” (640 × 480) 35.0066.67*
640 × 480 @75 37.5075.00*
852 × 480 @60 31.4459.89*
800 × 600 @60  37.8860.32*
800 × 600 @75  46.8875.00*
800 × 600 @85 53.6785.08*
Macintosh16” (832 × 624) 49.7374.55*
1,024 × 768 @60 48.3660.00*
1,024 × 768 @70 56.4870.07*
1,024 × 768 @75 60.0275.03*
1,024 × 768 @85 68.6885.00*
Macintosh 21” (1,152 × 870) 68.6875.06*
1,280 × 768 @60 47.7859.87*
1,280 × 1,024 @60  63.9860.02*
1,366 × 768 @60  48.3960.04*
Note
 
●Signals other than above may not be displayed properly. 
●The above signals are reformatted for optimal viewing on your display. 
●Computer signals which can be input are those with a horizontal scanning\
 frequency of 15 to 110 kHz and vertical scanning 
frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 l\
ines.)
Panasonic does not guarantee operation and performance of peripheral dev\
ices made by other manufacturers; and we 
disclaim any liability or damage arising from operation and/or performan\
ce from usage of such other maker’s peripheral 
devices. 
						

							53
Support Information
 Care and Cleaning
First, unplug the Power cord plug from the wall outlet.
Display panel
The front of the display panel has been specially treated. Wipe the pane\
l surface gently using only a cleaning cloth or a soft, lint-
free cloth.
 
●If the surface is particularly dirty, soak a soft, lint-free cloth in diluted mild liquid dish soap (1 part\
 mild liquid dish soap diluted 
by 100 times the amount of water) and then wring the cloth to remove ex\
cess liquid. Use this cloth to wipe the surface of the 
display panel, then wipe it evenly with a dry cloth of the same type unt\
il the surface is dry.
 
●Do not scratch or hit the surface of the panel with fingernails or other\
 hard objects. Furthermore, avoid contact with volatile 
substances such as insect sprays, solvents, and thinner; otherwise, the \
quality of the surface may be adversely affected.
Cabinet
If the cabinet becomes dirty, wipe it with a soft, dry cloth. 
●If the cabinet is particularly dirty, soak the cloth in a weak mild liquid dish soap and then wring the clot\
h dry.
Use this cloth to wipe the cabinet and then wipe it dry with a dry cloth\
.
 
●Do not allow any mild liquid dish soap to come into direct contact with \
the surface of the Plasma TV.
If water droplets get inside the unit, operating problems may result.
 
●Avoid contact with volatile substances such as insect sprays, solvents, a\
nd thinner; otherwise, the quality of the cabinet surface 
may be adversely affected or the coating may peel off.
 
●Do not let articles made from rubber or PVC be in contact with the TV for long periods of time.
Pedestal
 
●Cleaning
Wipe the surfaces with a soft, dry cloth. If the unit is particularly di\
rty, clean it using a cloth soaked with water to which a small 
amount of mild liquid dish soap has been added and then wipe with a dry \
cloth. 
Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating.\
 (If 
using a chemically-treated cloth, follow the instructions supplied with \
the cloth.)
 
●Do not attach sticky tape or labels, as they can make the surface of the\
 pedestal dirty. Do not allow long-term contact with 
rubber, vinyl products, or the like. (Doing so will cause deterioration.)
 Care and Cleaning
 Technical Information 
						

							54
QuestionsAnswers
Picture
 Frequently Asked Questions (FAQ)
If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry \
out the 
suggested check. If this does not solve the problem, visit the Panasonic\
 web site for further assistance. (see cover)
How do I view the picture from 
devices such as a: Cable/
Satellite box,  game console, 
Blu-ray or DVD player?  Press the INPUT button on the remote to select the correct 
input source.
  Check that the device is turned on and functioning correctly.
Why is there no picture or just 
a blue, black or snowy screen 
being displayed?
 Check if the power cord is plugged in and the TV is turned 
on (front red LED light should be on; not blinking)
 Press the INPUT button on the remote to select the correct input source. Ensure all connections are correct and secure.  When using external video source, such as a Cable/Satellite box or 
DVD player, check that the device is on and functioning correctly.
  Press MENU on the TV’s remote control. If the menu is displayed, then the TV is working; recheck above steps.
Why doesn’t the picture look 
like it is in High Definition?
 Press the INFO button on the remote to confirm the type of signal 
being received (p. 17). HD signal should be 720P, 1080i or 1080p.
  Select a High Definition channel from your HD source (Cable, Satellite or fiber optic service). HD channels 
sometimes broadcast non-HD content.
  Ensure that your HD source (HD box, Blu-ray player, etc.) is connected to the TV with an HDMI or Component cable 
and set to output an HD video signal.
Why do black bars appear on 
the top and bottom and/or sides 
of the screen?
  Change the format (aspect ratio) of the picture by pressing the FORMAT button on the remote control. (p. 18)
  Check the aspect settings on your external video source, such as Cable/Satellite box, DVD/Blu-ray Disc player, etc.
 
Note:  Some content, such as film-based movies, are available in  extra-wide format. Top and bottom bars are unavoidable.
Why is the picture snowy when 
“ANT/Cable in” is selected?
  When using a cable service (without a box), check that all connections are secure.
  When using a cable or satellite box, change the connection (wiring) to Composite, Component or HDMI. (p. 11)
  If you’re using an antenna, then check that connections are secure. Change the position or direction of the antenna and 
check the “Signal meter”. (p. 41)
Why is the picture chaotic and/
or torn and/or with a buzz in the 
speakers?  Check if electrical products such as kitchen appliances, fluorescent lights or light dimmers are nearby. They may 
interfere with the TV’s picture.
 Try viewing a picture from another device, such as a DVD player 
or a game console, to narrow down the source of the problem.
Why is there a black box on the 
screen?  Change settings of Closed Caption (CC). (p. 17, 46)
Why is the screen blank and the 
power indicator blinking? The TV has gone into shutdown mode to protect itself. Try unplugging 
it for a few minutes and connecting it again. If there was a temporary 
power surge on the AC line it may now be OK. If the blinking returns, 
call 1-877-95VIERA (U.S.A.) or 1-866-330-0014 (Canada).
Why do some small spots on 
the screen remain bright or 
dark?  The Plasma panel is made up of a few million pixels and is produced with advanced technology through an intricate 
process. Sometimes a few pixels may be bright or dark.
These pixels do not indicate a defective panel and will have 
no impact on the performance of the TV. 
						

							55
Support Information
 Frequently Asked Questions (FAQ)
QuestionsAnswers
Sound Other
Why is there no sound coming 
from the TV?
 Make sure the volume is up and MUTE is off.   Confirm the TV speakers are set to ON by pressing MENU 
and selecting “Audio” --> “Advanced audio”. (p. 45)
 Check that the correct SAP (Secondary Audio Program) is 
selected by pressing the SAP button on the remote control. (p. 17)
 If the TV is connected to a Panasonic Home Theater via HDMI 
cable, then check VIERA Link controls. (p. 33)
 If the TV is connected to a Home Theater via optical cable, 
then: Check the connection,  the audio system is on, the 
correct input is selected.
  Check “HDMI 1 in” or “HDMI 2 in” analog/digital audio settings. (p. 45)
Why is the sound unusual, 
distorted, low volume or in 
another language?
  Check that the correct SAP (Secondary Audio Program) is selected by pressing the SAP button on the remote control.
  Check that all connections of external equipment connected to the TV are secure. 
 When using Cable or Satellite box, check the device’s audio 
settings.  (example: try changing the box’s  Audio Range to ‘narrow’)
Why is there a clicking, ticking 
or buzzing sound coming from 
the TV unit? When TV power is turned on or shut off there are electrical 
components that make a click sound. This is normal operation.
 Changes in the temperature and humidity of the room may 
cause thermal expansion and contraction that can produce 
sounds. This is not a sign of faulty operation or a malfunction.
What is the easiest and best 
way to connect a High-Definition 
Cable or Satellite box to the TV?  Use an HDMI cable. It carries both digital video and audio signal in HD. HDMI cable is the only cable needed to 
connect an HD device to the TV.
Why does the CC button not 
display Closed Caption?  When viewing TV via an HDMI connected device, such as a Cable or Satellite box, CC must be enabled at the device. 
 Closed Caption is available only at supported TV programming.
Why does the screen and back 
cover of the TV get warm?
  The main unit radiates heat and some of the parts may become hot. This is normal operation and does not affect 
the performance of the set.
  Ensure good ventilation.  Do not block the ventilation holes of the TV and do not place the TV on top of other equipment.
Why doesn’t the Remote 
Control work?
  Check that the batteries are fresh, are of the same type and are installed with the correct polarity (+ & -).
  To operate other devices, such as changing channels when using Cable or Satellite boxes or operating non-Panasonic 
Blu-ray players, use the remote supplied with the device.
Why is the “ANT/Cable” option 
at the top of the “Input select” 
menu gray-out and cannot be 
selected? During “First time setup”, you indicated in step - that 
you are using Cable or Satellite box and in step -b that 
the box is connected to one of the TV’s AV inputs. In this 
case, the Antenna/Cable input is deactivated to prevent 
unintentional switching into unused tuner. To re-activate, 
press MENU, select SETUP and repeat “First time setup”.
Some menu items are grayed-
out and cannot be selected. 
Why? Depending on certain modes or the selected input, some 
options are not available. For example, Zoom adjustments are 
only available when the FORMAT is changed to zoom mode. 
						

							56
QuestionsAnswers
Networking 
How do I get EASY IPTV to work 
on my TV?
1. You need a broadband (high speed) Internet service with a 
speed of no less than 1.5 Mbps (p. 34).
2. Connect the TV to the Internet through your router by an  Ethernet cable or a compatible Panasonic USB wireless 
adapter.
3. Run the “Connections Test”, under the Network Settings  menu.
If Connection test fails, then check with your Internet 
service provider or router/modem manufacturer if there are 
firewall, content filter or proxy settings that may block the 
TV from accessing the Internet.
How do I check for the latest 
software (firmware) version for 
my TV?
  In the main menu, select “Setup”. Highlight “Network Settings” and press OK. Select “Software Update”. The 
current version and latest version software will be shown. If 
software update is “grayed out”, the TV is not connected to 
the Internet. If newer version is available, update your TV. 
Follow the on-screen instructions, do not power off the TV 
until the update is complete. Be patient; firmware update 
may take a while.
Can I use any USB WiFi adapter 
to connect the TV to my 
wireless network?  The TV’s internal software was designed to work with Panasonic’s wireless adapter model DY-WL10*. Check 
www.panasonic.com/NetConnect for updated information.
How do I reset my TV to all 
factory defaults and settings?  In the main menu, select “Setup”. Highlight “Reset to Defaults” and press OK. Enter your password (if created 
earlier) or create a temporary new password. Select Yes to 
reset the TV.
* Model number is subject to change without notice. 
						

							57
Support Information
 Specifications
 Frequently Asked Questions (FAQ)
TC-50PX34
Power Source AC 120 V
 , 60 HzPower
ConsumptionRated Power 
Consumption262 W
Standby condition 0.2 W
Plasma 
Display panelDrive methodAC type
Aspect Ratio 16:9
Visible screen size
(W × H × Diagonal)
(No. of pixels)  50 ” class (49.9 inches measured diagonally)
43.5 ” × 24.4 ” × 49.9 ” 
(1,105 mm × 622 mm × 1,268 mm)
786,432 (1,024 (W) × 768 (H)) [3,072 × 768 dots]Sound
Audio Output
20 W [10 W + 10 W] (10 % THD)
PC signals VGA, SVGA, XGA, WXGA, SXGA 
Horizontal scanning frequency 31 - 69 kHz
Vertical scanning frequency 59 - 86 Hz
Channel Capability
(Digital/Analog) VHF/ UHF:  2 - 69, CATV:  1 - 135
Operating Conditions Temperature:  32 °F – 104 °F (0 °C – 40 °C) 
Humidity:    20 % – 80 % RH (non-condensing)
Connection Terminals
VIDEO INVIDEO:    RCA PIN Type × 1    1.0 V [p-p] (75 
Ω)
AUDIO L-R:  RCA PIN Type × 2    0.5 V [rms]
 COMPONENT IN Y:    1.0 V [p-p] (including synchronization)
P
B, PR:    ±0.35 V [p-p]
AUDIO L-R:  RCA PIN Type × 2    0.5 V [rms]
 HDMI 1-2 TYPE A Connector × 2
• This TV supports “HDAVI Control 5” function.
PC D-SUB 15PIN:  R,G,B / 0.7 V [p-p] (75 
Ω)
    HD, VD / 1.0 - 5.0 V [p-p] (high impedance)
 USB 1-2 USB 2.0 Type A connector x 2 (DC5V MAX500mA)
LAN 
(for IPTV) RJ45 (10BASE-T/100BASE-TX)
Card slot SD CARD slot × 1
DIGITAL AUDIO OUT PCM / Dolby Digital, Fiber Optic
FEATURES 3D Y/C FILTER  CLOSED CAPTION
V-Chip EASY 
IPTV
VIERA IMAGE VIEWER  Media player  HDAVI Control 5
Dimensions
( W × H × D )Including pedestal47.8 ” × 31.3 ” × 14.1 ” (1,212 mm × 793 mm × 357 \
mm)
TV Set only 47.8 ” × 29.5 ” × 3.4 ” (3.7 ”) (1,212 mm × 747 \
mm × 85 mm (93 mm))Mass  Including pedestal
69.5 lb. (31.5 )
TV Set only 66.2 lb. (30.0 
)
 Specifications
14.1 ” (357 mm)
3.4 ” 
(85 mm) 3.7 ” 
(93 mm)47.8 ” (1,212 mm)
17.2 ”
(436 mm)
29.5 ” (747 mm) 31.3 ” (793 mm)
Note
 Design and Specifications are subject to change without notice. Mass and\
 Dimensions shown are approximate.
[TC-50PX34] 
						

							58
Index
 A  Accessories ............................................................. 7Ant/Cable .......................................................... 14,40
Antenna ............................................................ 10,14
Audio ..................................................................\
.... 45
Audio, Advanced .................................................... 45
Auto Power ON ...................................................... 47
Auto Program ......................................................... 40
 B  Battery ..................................................................... 9
 C  Cable .................................................................10,11 Care & Cleaning 
 .................................................... 53
CC Closed Caption ...................................... 17,46,51
Channel ............................................. 14,17-18,40-41
Channel Surf Mode ........................................... 18,47
Clock ................................................................. 15,47
Colored Buttons ..................................................... 12
Component ........................................................11,57
Composite ..............................................................\
.11
Connections .......................................................10,11
Customer Service Directory ................................... 60
 E  EASY IPTV ....................................................... 20,38 ECO/energy ......................................................
 20,47
Exit ...................................................................\
...... 12
 F   FAQ’s ................................................................ 54-56
Favorite ...............................................................\
...
 18
First Time Setup ........................................... 13-16,47
Format .............................................................. 18,49
 H  HDAVI Control  ........................................................
 28
HDMI .............................................................11,51,57
Home Use .............................................................. 13
 I   Image Viewer Auto ................................................. 47
Info ...................................................................\
......
 17
Input ..................................................................\
 21,47
IPTV service .......................................................... 38
 L  Language .......................................................... 13,47 Last ...................................................................\
.....
 12
Lock / Parental contorol .................................... 46,48
 M  Media player ................................................ 20,22-27 Menu ...................................................................\
...
 42
Movies/Video ......................................................... 26
Music ..................................................................\
... 27
Mute ...................................................................\
.... 12
 N  Network camera ...................................... 33-34,37,39 Network services 
 .................................... 15,34-37,47
 P  Pedestal ................................................................ 7,8 Photo ................................................................
 24-25
Picture, Advanced .................................................. 44
Picture settings ................................................. 43-44
Power ..................................................................\
... 12
 R  Remote Control ...................................................... 12 Reset ..................................................................\
...
 47
 S  Safety ....................................................................... 4SAP  .......................................................................\
. 17
Scan .................................................................. 14,40
SD Card ............................................................ 22,50
Signal Meter ........................................................... 41
Sleep ..................................................................\
.... 45
Specifications .........................................................\
 57
Store Demonstration .............................................. 13
Sub menu .............................................................. 18
 T   Technical Information ........................................ 49-52
T
 imer ...................................................................\
... 45
 U  USB ............................................................. 22,50,57
 V  VIERA Link ................................................... 20,28-33 VIERA
  TOOLS ....................................................... 20
Viewing contents .................................................... 23
Volume ..................................................................\
. 12
 W   Warranty ........................................................... 59,61
W
 atching TV, DVD, Blu-ray, etc. ....................... 17,21
Wireless LAN Adapter ....................................... 16,34
 Z   Zoom ................................................................. 18,49 
						

							59
Support Information
 Limited Warranty (for U.S.A. and Puerto Rico only)
 Index
 Limited Warranty (for U.S.A. and Puerto Rico only)
PANASONIC CONSUMER ELECTRONICS COMPANY,
DIVISION OF
PANASONIC CORPORATION OF NORTH AMERICA
One Panasonic Way
Secaucus, New Jersey 07094
Panasonic Plasma TelevisionLimited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials \
or workmanship, Panasonic Consumer 
Electronics Company (referred to as “the warrantor”) will, for t\
he length of the period indicated on the chart below, which 
starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product wit\
h new 
or refurbished parts, (b) replace it with a new or a refurbished equiv\
alent value product, or (c) refund your purchase price. 
The decision to repair, replace or refund will be made by the warrantor.
PLASMA TV CATEGORIES PARTSLABORSERVICE
Up to 42” (diagonal) 1 (ONE) YEAR1 (ONE) YEAR Carry-In
46” (diagonal) and larger On-Site
During the “Labor” Limited Warranty period there will be no charge for labor. During the “Parts” Limited Warranty period, 
there will be no charge for parts.
You must carry-in your product or arrange for on-site service during the \
Limited Warranty period. If non-rechargeable 
batteries are included, they are not warranted. This Limited Warranty only applies to products purchased and serviced 
in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser of a new product 
which was not sold “as is”. A purchase receipt or other proof of the original purchase date is requir\
ed for Limited Warranty 
service.
On-Site or Carry-in Service
For On-Site or Carry-In Service in the United States and Puerto Rico cal\
l 1-877-95-VIERA (1-877-958-4372).
On-site service where applicable requires clear, complete and easy access to the product by the authorized servicer 
and does not include removal or re-installation of an installed product.\
 It is possible that certain on-site repairs will not 
be completed on-site, but will require that the product or parts of the \
product, at the servicer’s discretion be removed for 
shop diagnosis and/or repair and then returned.
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NO\
T COVER 
normal wear and tear or cosmetic damage, nor does it cover markings or r\
etained images on the glass panel resulting 
from viewing fixed images (including, among other things, non-expanded \
standard 4:3 pictures on wide screen TV’s, 
or onscreen data in a stationary and fixed location). The Limited Warranty ALSO DOES NOT COVER damages which 
occurred in shipment, or failures which are caused by products not suppl\
ied by the warrantor, or failures which result 
from accidents, misuse, abuse, neglect, bug infestation, mishandling, mi\
sapplication, alteration, faulty installation, 
set-up adjustments, misadjustment of consumer controls, improper mainten\
ance, power line surge, lightning damage, 
modification, or commercial use (such as in a hotel, office, restaurant, or other business), rental use of the product, 
service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts 
of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. 
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE 
USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this 
excludes damages for lost time, cost of having someone remove or re-inst\
all an installed unit if applicable, or travel to 
and from the servicer. The items listed are not exclusive, but are for illustration only.)  ALL EXPRESS AND IMPLIED 
WARRANTIES, INCLUDING THE LIMITED WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF 
THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or co\
nsequential damages, or limitations on how long an 
implied Limited Warranty lasts, so the exclusions may not apply to you.
This Limited Warranty gives you specific legal rights and you may also have others rig\
hts which vary from state to state. If 
a problem with this product develops during or after the Limited Warranty period, you may contact your dealer or Service 
Center. If the problem is not handled to your satisfaction, then write to the \
warrantor’s Consumer Affairs Department at 
the addresses listed for the warrantor.
PARTS AND SERVICE (INCLUDING COST OF AN ON-SITE SERVICE CALL, WHERE APPLICABLE) WHICH ARE 
NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY. 
						

							60
 Customer Services Directory (for U.S.A. and Puerto Rico)
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; 
purchase Parts and Accessories; or make Customer Service and Literature requests by visitin\
g our Web 
Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-877-95-VIERA (958-4372)
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
 
■For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books on line for all Panasonic Products by \
visiting our Web 
Site at:
http://www.pstc.panasonic.com
or, send your request by E-mail to: 
[email protected]
You may also contact us directly at: 
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday - Friday 9\
 am to 9 pm, EST.)
Panasonic Service and Technology Company
20421 84th Avenue South,
Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)
 
■For hearing or speech impaired TTY users, TTY: 1-866-605-1277