Panasonic 50" Class 4k2k Led Uhd Tv Tc 50cx400 Owners Manual

      21
PICTURE
Press  buttons to select PICTURE menu and then press OK button to enter. Use  buttons to select 
the following picture options and then use 
 buttons to set each option’s setting.
Picture Mode Cycle among picture mode: Standard/Cinema/Game Mode(in HDMI 
or VGA mode)/Custom/Vivid.
Alternative: 
you may press the P.MODE button to select the 
picture mode directly.
Blue Screen Allow the blue background to turn On/Off during weak or no signal 
conditions.
Brightness Increase or decrease the...

22
SOUND
Press  buttons to select SOUND menu and then press OK button to enter. Use  buttons to select 
the following sound options and then use 
 buttons to set each option’s setting.
Sound Mode Allow the selection of an audio-enhancement technique: Standard/
Music/Cinema/Custom.
Alternative: you may press the 
S.MODE button to select the sound 
mode directly.
Bass Control the relative intensity of lower-pitched sounds. 
Treble Control the relative intensity of higher-pitched sounds. 
Balance Adjust the...

      23
NETWORK
Press  buttons to select NETWORK menu and then press OK button to enter. Use  buttons to 
select the following network options and then set each option’s setting.
Network TypeSelect two types of network: Wired(Ethernet) or Wireless. 
Wired(Ethernet)Connect the Ethernet to the TV: Auto Get IP/Manual Get IP. 
WirelessConnect the TV to the wireless network through searching the 
available Wi-Fi.
Network StatusDisplay the current information of network status: Subnet Mask/
Gateway/DNS Server...

24
PARENTAL CONTROL
Press  buttons to select PARENTAL CONTROL menu and then press OK button to enter. Use the 0-9 
buttons to input 4-digit password to enter the LOCK menu. (Note: the de\
fault password is “0000”. ) Use 
 
buttons to select the following lock options and set each option’s setting.
Note: The  PARENTAL CONTROL is available only when you choose the ANTENNA/CBL mode in Input source 
firstly.
Change Password Use 
0-9 buttons to input the old password and then input 
the new 4-digit password....

      25
SYSTEM
Press  buttons to select SYSTEM menu and then press OK button to enter. Use  buttons to select 
the following system options and set each option’s setting.
Transparency Select to turn On/Off menu transparency function.
VGA Setting Set the VGA setting: H-POS, V-POS, Clock, Phase or Auto. (VGA 
source mode only) 
Closed Caption CC Mode
Select CC mode : Off, On or CC on Mute.
Basic Selection Basic Selection: CC1, CC2, CC3, CC4, Text1, 
Text2, Text3, Text4.
Advanced 
Selection Advanced...

26
SUPPORT
Press  buttons to select SUPPORT, and then use OK or  button to jump to eHELP, then press OK 
button to enter. Use 
 buttons to select eHELP or Open Source Notices and press OK to access.
eHELP: Select eHELP and press OK button to enter, and then use  buttons to view the built-in 
user manual.
Open Source Notices: displays the notices of open source. 

      27
Frequently Asked Questions (FAQ)
QuestionsAnswers
Why doesn’t the remote control 
work?
Check that the batteries are fresh, are of the same type 
and are installed with the correct polarity (+ & -). 
To operate other devices, such as changing channels when 
using Cable or Satellite boxes, or operating non-Panasonic 
Blu-ray players, use the remote supplied with the device.
Why is there no picture 
or just a blue, black or snowy 
screen being displayed?
Ensure that the power cord is plugged in...

28
Care and Cleaning
First, unplug the power cord plug from the wall outlet.
Display panel
The front of the display panel has been specially treated. Wipe the pane\
l surface gently using only a cleaning 
cloth or a soft, lint-free cloth. 
If the surface is particularly dirty after cleaning up the dust, soak a \
soft, lint-free cloth in diluted, mild liquid 
dish soap (1 part mild liquid dish soap diluted by 100 times the amount\
 of water), and then wring the cloth 
to remove excess liquid. Use this...

      29
Specifications
TC-50CX400UPower SourceAC 120 V, 60 Hz
Power Consumption
(Rated power / Standby power) 150 W / 0.5 W
Display Panel Panel System
LCD panel (LED backlight)
Screen size 50 " class
(49.5 inches measured diagonally)
W × H × Diagonal 43.1 " × 24.2 " × 49.5 "
(1096.01 mm × 616.68 mm × 1257 mm)
Number of pixels 3840 × 2160
Speaker Output 16 W [8 W + 8 W] (10 % THD)
Channel Capability
(Digital/Analog) VHF/ UHF: 2 - 69, CATV: 1 - 135
Operating Conditions Temperature: 32 °F -...

30
Limited Warranty (for U.S.A.)
Panasonic Television Limited Warranty
Limited Warranty CoverageIf your product does not work properly because of a defect in materials \
or workmanship, Panasonic Corporation of North America (referred to as 
“the warrantor”) will, for the length of the period indicated on \
the chart below, which starts with the date of original purchase
(“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a...