Panasonic 42" Class 720p Plasma Hdtv Tc 42px34 Owners Manual

							
Owner’s Manual
42” Class 720p Plasma HDTV
(41.6 inches measured diagonally)
For assistance (U.S.A./Puerto Rico), please call:1-877-95-VIERA (958-4372)www.panasonic.com/help
For assistance (Canada), please call:1-866-330-0014www.vieraconcierge.ca
Model No.
TC-42PX34
EnglishThank you for purchasing this Panasonic product.
Please read these instructions before operating your set and retain them\
 for future 
 reference. The images shown in this manual are for illustrative purposes only. 
						

							
2
 
■Do not display a still picture for a long timeThis causes the image to remain on the plasma screen
(“Image retention”). This is not considered a malfunction and is not covered by the warranty.
4 : 312 To prevent the “Image retention”, the screen saver is 
automatically activated after a few minutes if no signals are 
sent or no operations are performed.
Typical still images
 
●Channel number and other logos 
●Image displayed in 4:3 mode 
●SD Card photo     ●Video game     ●Computer image
 
■Set up 
●Do not place the unit where it’s exposed to sunlight or other bright light (including reflections). 
●Use of some types of fluorescent lighting may reduce the remote control’\
s transmission range.
Experience an amazing level of 
multimedia excitement
SD memory card
Camcorder
Amplifier with
Speaker system Cable box
DVD player/
Blu-ray Disc player
DVD recorder/
Blu-ray Disc recorder
VCR
Enjoy rich multimedia 
						

							
3
Basic
Advanced
Support Information
Getting started
VIERA Link™ is a trademark of 
Panasonic Corporation.
HDMI, the HDMI logo and High-
Definition Multimedia Interface are 
trademarks or registered trademarks 
of HDMI Licensing LLC in the United 
States and other countries.
SDXC Logo is a trademark of SD-
3C, LLC.
This product qualifies for ENERGY 
STAR in the “Home Use” setting 
and this is the setting in which 
energy savings will be achieved. 
Any modifications to the “Home 
Use” setting or other factory default 
settings could result in greater 
energy consumption beyond 
levels that meet ENERGY STAR 
qualifications.
Manufactured under license from Dolby Laboratories. 
Dolby and the double-D symbol are trademarks of Dolby 
Laboratories.
HDAVI Control™ is a trademark of Panasonic Corporation.
TM
• Watching TV ··················\
··················\
············· 16
• Using VIERA TOOLS ··················\
··················\
 19
• Watching content from external devices ······· 20
• Viewing photo with VIERA IMAGE VIEWER ······· 21
• VIERA LinkTM “HDAVI ControlTM”  ··················\
·· 24
• Editing and Setting Channels ··················\
····· 30
• How to Use Menu Functions··················\
······· 32• Picture settings ··················\
··················\
······· 33• Audio settings ··················\
··················\
········· 34• Timer settings ··················\
··················\
········· 34• Lock ·················\
··················\
··················\
······· 35• Closed caption ··················\
··················\
········ 35• Setup ·················\
··················\
··················\
····· 36
• Ratings List for parental control ··················\
·· 37
• Technical Information ··················\
··················\
 38
• Care and Cleaning ··················\
··················\
···· 41
• Frequently Asked Questions (FAQ) ·············· 42
• Specifications··················\
··················\
············ 44
• Index ·················\
··················\
··················\
········ 45
• Limited Warranty 
(for U.S.A. and Puerto Rico only) ················· 46
• Customer Services Directory 
(for U.S.A. and Puerto Rico) ··················\
······· 47
• Limited Warranty (for Canada) ··················\
··· 48
Basic Features
Advanced Features
Support Information
• Safety Precautions··················\
··················\
······ 4
Please read before using the unit
• Accessories/Optional Accessory··················\
··· 7
• Connections ···············\
··················\
················· 10
• Identifying Controls ··················\
··················\
··· 12
• First Time Setup··················\
··················\
········ 13
Getting started
Contents 
						

							
4
 Safety Precautions
WARNING:To reduce the risk of fire or electric shock, do not expose this apparatu\
s to rain or moisture.
Do not place liquid containers (flower vase, cups, cosmetics, etc.) ab\
ove the set
(including on shelves above, etc.).
Important Safety Instructions
   
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
   
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service p\
ersonnel.
The lightning flash with 
arrowhead within a triangle is 
intended to tell the user that 
parts inside the product are a risk 
of electric shock to persons.
The exclamation point within a 
triangle is intended to tell the 
user that important operating 
and servicing instructions are in 
the papers with the appliance.
1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.
7)  Do not block any ventilation openings. Install in 
accordance with the manufacturer’s instructions.
8)  Do not install near any heat sources such as radiators,  heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.
9)  Do not defeat the safety purpose of the polarized or  grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade or the 
third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.
10)  Protect the power cord from being walked on or pinched  particularly at plugs, convenience receptacles, and the 
point where they exit from the apparatus. 11)  Only use attachments / accessories specified by the 
manufacturer.
12)  Use only with the cart, stand, tripod, bracket, or table specified by the 
manufacturer, or sold with the apparatus. 
When a cart is used, use caution when 
moving the cart / apparatus combination to 
avoid injury from tip-over.
13)  Unplug this apparatus during lightning storms or when  unused for long periods of time.
14)  Refer all servicing to qualified service personnel. Servicing  is required when the apparatus has been damaged in any 
way, such as power-supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the apparatus, 
the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.
15)  To prevent electric shock, ensure the grounding pin on the  AC cord power plug is securely connected.
WARNING/CAUTION (TV set)
WARNING
Small parts can present choking hazard if accidentally 
swallowed.
Keep small parts away from young children.
Discard unneeded small parts and other objects, 
including packaging materials and plastic bags/sheets to 
prevent them from being played with by young children, 
creating the potential risk of suffocation.
 
■Set up  This Plasma TV may fall and can cause personal injury or 
even death if not installed correctly. To prevent personal 
injury or death, follow these warnings:
 
●Install the Plasma TV in accordance with the 
manufacturer’s recommended pedestal or stand, 
corresponding hardware and installation instructions.
  This Plasma TV is for use only with the following  optional accessories. Use with any other type of optional 
accessories may cause instability. The following accessories 
are manufactured by Panasonic Corporation.•  Wall-hanging bracket (Angled) 
   TY-WK4P1RW
 
●Be sure to ask a qualified technician to carry out the 
installation and set-up.
  Two or more people are required to install or remove the  television.
 
●Some wall mounts (wall-hanging brackets) are not 
designed to be mounted to walls with steel studs or old 
cinder block constructions.
  Ask your dealer or licensed contractor to properly secure  the wall-hanging bracket.
 
●Do not route the TV’s power cord inside the wall.
  The power cord was not designed for in-wall mounting. Doing so can lead to fire hazard.
 
●Do not place the Plasma TV or its stand on a sloped or 
unstable surface.
  The Plasma TV may fall or tip over.
 
●Do not support the Plasma TV on a non-specified 
pedestal.
 
●Do not place the Plasma TV on furniture that can easily 
be used as steps, such as a chest of drawers.
 
●Do not climb or allow children to climb on the Plasma TV
 
●Place or install the Plasma TV where it cannot be 
pushed, pulled over or knocked down.
 
●Route all cords and cables such that they cannot be 
tripped over or pulled by curious children. 
						

							
5
 
●Do not place any objects on top of the Plasma TV.
  If water spills onto the Plasma TV or foreign objects get  inside it, a short-circuit may occur which could result in 
fire or electric shock. If any foreign objects get inside the 
Plasma TV, please consult an Authorized Service Center.
  In the unlikely event that you receive a shock from this  product it is possible that your household outlet may be 
wired improperly. Have an electrician verify that the TV’s 
outlet is properly wired. If the symptom persists, have the 
TV serviced by a qualified authorized technician.
 
●To prevent the spread of fire, keep candles 
or other open flames away from this 
product at all times
 
■AC Power Supply CordTo prevent fire or electric shock:
 
●The Plasma TV is designed to operate on a 120 V AC, 
60 Hz service. Insert the power cord plug as far as it will 
go into the wall socket.
  If the plug is not fully inserted, heat may generate, which  could cause a fire.
 
●The included power cord is for use with this unit only.
 
●Do not use any power cord other than that provided 
with this TV.
 
●Do not handle the power cord plug with wet hands.
 
●Do not do anything that might damage the power 
supply cord.
 
●When disconnecting the power supply cord, hold the 
plug, not the cord.
 
●Do not use the power supply cord if the plug or cord is 
damaged.
 
Replace the cord or contact your Authorized Service Center.
 
●Do not use a 3-prong to 2-prong AC plug adapters to 
connect your TV’s plug to the wall outlet.
  Doing so will defeat the TV plug’s safety feature, which  can lead to a shock hazard. If the wall outlet does not 
accommodate a 3-prong plug, have a qualified electrician 
replace your outlet and check the associated wiring.
 
■Handling the power supply cord
 
●Insert the power plug fully into the socket outlet. (If the 
power plug is loose, it could generate heat and cause fire.)
 
●Ensure that the power plug is easily accessible.
 
●Ensure the earth pin on the power plug is securely 
connected to prevent electrical shock.
•  An apparatus with CLASS I construction shall be  connected to a power socket outlet with a protective 
earthing connection.
 
●Do not touch the power plug with a wet hand. (This may 
cause electrical shock.)
 
●Do not use any power cord other than that provided 
with this TV. (This may cause fire or electrical shock.)
 
●Do not damage the power cord. (A damaged cord may 
cause fire or electrical shock.)
•  Do not move the TV with the cord plugged in the socket outlet.•  Do not place a heavy object on the cord or place the cord 
near a high-temperature object.
•  Do not twist the cord, bend it excessively, or stretch it.
•  Do not pull on the cord. Hold onto the power plug body  when disconnecting cord.
•  Do not use a damaged power plug or socket outlet.
 
●If a problem occurs (such as no picture or no sound), 
or if smoke or an abnormal odor is detected from the 
Plasma TV, unplug the power supply cord immediately.
  Continued use of the TV under these conditions might  cause a fire or permanent damage to the TV. Have the TV 
evaluated by an Authorized Service Center. Servicing of the 
TV by unauthorized personnel is strongly discouraged due 
to its high voltage.
 
●If water or an object gets inside the Plasma TV, if the 
Plasma TV is dropped, or if the enclosure becomes 
damaged, unplug the power supply cord immediately.
  A short-circuit may occur, which could cause a fire. Contact  an Authorized Service Center for an evaluation.
CAUTION
 
●Do not cover the ventilation holes.
  Doing so may cause the Plasma TV to overheat, which can  cause a fire or damage to the Plasma TV.
 
●Leave a space of 3 15/16” (10 cm) or more at the top, 
left and right, and 2 3/4” (7 cm) or more at the rear. 
 
●When using the pedestal, keep the space between the 
bottom of the TV and the pedestal or stand surface 
clear from objects that may obstruct ventilation.
 
■When Moving the Plasma TV
 
●Be sure to disconnect all cables before moving the 
Plasma TV.
  Moving the TV with its cables attached might damage the  cables which, in turn, can cause fire or electric shock.
 
●To prevent an electric shock, disconnect the power 
plug from the wall outlet as a safety precaution before 
carrying out any cleaning.
 
●Transport only in upright position.
  Transporting the unit with its display panel facing upright or  downward may cause damage to the internal circuitry.
 
●Using a dry cloth, clean any dust from the power supply 
cord and plug regularly.
  Build-up of dust on the power cord plug can increase  humidity, which might damage the insulation and cause a 
fire.
This Plasma TV radiates infrared rays; 
  therefore, it may affect other infrared communication  equipment. Install your infrared sensor in a place away from 
direct or reflected light from your Plasma TV.
The TV will still consume some power as long as the 
power supply cord is connected to the wall outlet.
 
●Display panel is made of glass. Do not apply strong 
force or impact to the display panel.
  This may cause damage resulting in injury.
 
●The TV is heavy. TV should be handled by 2 or more 
people. Support as shown to avoid injury by the TV 
tipping or falling.
  
						

							
6
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a\
n Other Class B digital device, pursuant to Part 15 of the 
FCC Rules. These limits are designed to provide reasonable protection against harmf\
ul interference in a residential installatio n.
This equipment generates, uses and can radiate radio frequency energy an\
d, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. Ho\
wever, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause harmful\
 interference to radio or television reception, which c an be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by o\
ne or more of the  
following measures: •  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the Panasonic Service Center or an experienced radio/TV technici\
an for help.
FCC Caution:
To assure continued compliance, follow the attached installation instruct\
ions and use only shielded interface cables 
when connecting to peripheral devices. Any changes or modifications not expressly approved by Panasonic Corp. o\
f 
North America could void the user’s authority to operate this device.
Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094
Contact Source: Panasonic Consumer Electronics Company 1-877-95-VIERA (958-4372)
email: [email protected]
CANADIAN NOTICE:
For Model TC-42PX34
This Class B digital apparatus complies with Canadian ICES-003.
CEA CHILD SAFETY NOTICES
WARNING
Flat panel displays are not always supported on the 
proper stands or installed according to the manufacturer’s 
recommendations. Flat panel displays that are inappropriately 
situated on dressers, bookcases, shelves, desks, speakers, 
chests or carts may fall over and may cause personal injury or 
even death. 
The consumer electronics industry (of which Panasonic is 
a member) is committed to making home entertainment 
enjoyable and safe. To prevent personal injury or death, be 
sure to follow the following safety guidelines: 
TUNE INTO SAFETY: 
•  One size does NOT fit all.  Follow the manufacturer’s  recommendations for the safe installation and use of your 
flat panel display. 
•  Carefully read and understand all enclosed instructions for  proper use of this product. 
•  Don’t allow children to climb on or play with furniture and  television sets. 
•  Don’t place flat panel displays on furniture that can easily be  used as steps, such as a chest of drawers. 
•  Remember that children can become excited while watching  a program, especially on “larger than life”  flat panel 
displays.  Care should be taken to install the display where it 
cannot be pushed, pulled over, or knocked down. 
•  Care should be taken to route all cords and cables  connected to the flat panel display so that they cannot be 
pulled or grabbed by curious children.  WALL MOUNTING:
 IF YOU DECIDE TO WALL MOUNT 
YOUR FLAT PANEL DISPLAY, ALWAYS: 
•  Use a mount that has been recommended by the display  manufacturer and/or listed by an independent  laboratory 
(such as UL, CSA, ETL). 
•  Follow all instructions supplied by the display and wall  mount manufacturers. 
•  If you have any doubts about your ability to safely  install your flat panel display, contact your retailer about 
professional installation. 
•  Make sure the wall where you are mounting the display  is appropriate.  Some wall mounts are not designed to 
be mounted to walls with steel studs or old cinder block 
construction.  If you are unsure, contact a professional 
installer. 
•  A minimum of two people are required for installation.  Flat  panel displays can be heavy. 
Panasonic recommends that a qualified installer perform 
the wall-mount installation. See page 4.
The American Academy of Pediatrics discourages 
television viewing for children younger than two years 
of age. 
						

							
7
Getting started
 Accessories/Optional Accessory
Accessories/Optional Accessory
 Accessories
Remote Control 
Transmitter
 N2QAYB000570
Batteries for the
Remote Control
Transmitter (2)
 AA Battery
AC cord
Accessories
Check you have all the items shown.
 Pedestal TBLX0134
Quick start guide
Owner’s Manual
Product Registration Card (U.S.A.)
Child safety
How to assemble (p. 8)
  Optional AccessoryPlease contact your nearest Panasonic dealer to purchase the recommended\
 
wall-hanging bracket. For additional details, please refer to the wall-h\
anging 
bracket installation manual.
Wall-hanging bracket
(angled)
 TY-WK4P1RW
 a:  15.7” (400 mm)
b: 11.8” (300 mm)
Rear of the TV
Holes for wall-hanging 
bracket installation Screw for fixing the TV onto the wall-hanging bracket 
(not supplied with the TV)
Depth of screw:
minimum 0.59” (15.0 mm), 
maximum  1.18” (30.0 mm) 
(View from the side)
a b
Warning
  In order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licensed contractor to secure the wall-hanging brackets.
  Carefully read the instructions accompanying optional accessories, and b\
e absolutely sure to take steps to prevent the TV from tipping over.
  Handle the TV carefully during installation since subjecting it to impact or other \
forces may cause product damage.
  Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging the bracket.
  When using the angled-type wall hanging bracket, please ensure that ther\
e is sufficient space for the connecting cables not to press against the wall when the TV is tilted forward.
  For safety reasons, remove units no longer being used from their wall-mo\
unted locations.
M8 
						

							
8
Accessories
Assembly screws 
(4 of each)
 
A
 XYN5+F18FN
  size (M5 × 18) (Silver)
B
 THEL078N
  size (M5 × 30) (Black)
Poles (2)
LR
  L or R is printed at the 
bottom of the poles.
 Base (1)
 Attaching the pedestal to TV
■Assembling the pedestal
   Fix securely with assembly screws A (Total 4 screws).
   Tighten screws firmly.
A
L
RPole
Front
Pole
Base
■Set-up
  Carry out work on a horizontal and level surface.
   Tighten screws firmly.
B
 Fix securely with assembly 
screws B (Total 4 screws).
Rear side
Arrow 
mark
Pole Hole for pedestal 
installation 
Pole
 Base 
Bottom view
Warning
Do not disassemble or modify the pedestal.
 Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
 Otherwise the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged. If you use the pedestal when it is physically damaged, personal injury m\
ay result. Contact your nearest Panasonic 
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
 If sufficient care is not taken to ensure screws are properly tightened during\
 assembly, the pedestal will not be strong 
enough to support the TV, and it might fall over and become damaged, and personal injury may res\
ult. 
						

							
9
Getting started
 Accessories/Optional Accessory
 Installing the remote’s batteries
Open
Hook
Note the correct polarity
(+ or -). Close
Caution
 Incorrect installation may cause 
battery leakage and corrosion, 
resulting in damage to the remote 
control.
• Do not mix old and new batteries.
• Do not mix different battery types (such 
as alkaline and manganese batteries).
• Do not use rechargeable (Ni-Cd) batteries.
 Do not burn or break batteries.
Power cord connection
To attach To remove
Insert it firmly until the 
tabs on both sides click 
into place. Keep pushing both 
sides until they snap 
and pull. 
						

							
10
 Connections
Connection Panels
Power Cord
(Connect after all the 
other connections have 
been made.)VHF/UHF Antenna
•  NTSC (National Television System Committee):
ATSC (Advanced Television Systems Committee):
Digital TV Standards include digital high-definition television (HDTV), standa\
rd-definition television 
(SDTV), data broadcasting, multichannel surround-sound audio and inter\
active television.
Back of the TV
Cable TV
VHF/UHF Antenna
or
*  
See page 9 
(Power cord 
connection)
 
■Antenna terminal 
■Pin terminals 
■HDMI terminal
green
blue
red
green
 
●Firmly tighten by hand. 
●Match colors of plugs and terminals. 
●Insert firmly. 
●Insert firmly.
 Connection references
  Antenna or Cable connection
 Cable 
●You need to subscribe to a cable TV service to enjoy viewing their programming. 
●You may need to subscribe to a high-definition (HD) cable service to en\
joy HD programming. 
The connection for high-definition can be done with the use of an HDMI o\
r Component Video cable. (p. 11)
Note
 
●When using a Cable box, external equipment and video cables shown in thi\
s manual are not supplied with the TV. 
●When disconnecting the power cord, be absolutely sure to disconnect the \
power cord plug from the wall outlet first. 
●For additional assistance, visit us at:    www.panasonic.com/help
www.panasonic.ca
B
C
A
Back of the TV DIGITAL AUDIO  OUT
SD card 
slot (p.21) Front of the TV