Panasonic 42"50" Class 720p Plasma Hdtv Tc P50xt50 Owners Manual

							Owner’s Manual
42”/50” Class 720p Plasma HDTV
(41.9/49.9 inches measured diagonally)
Manual de usuario
Televisión de alta definición de 720p y 
clase 42”/50” de Plasma
(41,9/49,9 pulgadas medidas diagonalmente)
For assistance (U.S.A./Puerto Rico), please call:1-877-95-VIERA (958-4372)www.panasonic.com/help
For assistance (Canada), please call:1-866-330-0014concierge.panasonic.ca
Para solicitar ayuda (EE.UU./Puerto Rico), llame al:
1-877-95-VIERA (958-4372)www.panasonic.com/help 
Gracias por su decisión de comprar este producto marca Panasonic.
Lea estas instrucciones antes de utilizar su televisor y guárdelas pa\
ra consultarlas en 
el futuro. Las imágenes mostradas en este manual tienen solamente fin\
es ilustrativos.
Model No.
Número de modelo
TC-P42XT50
TC-P50XT50
Español
EnglishThank you for purchasing this Panasonic product.
Please read these instructions before operating your set and retain them\
 for future 
 reference. The images shown in this manual are for illustrative purposes only.
TQB2AA0637
Scan, watch and discover how to
get the most out of your TV
Escanee, observe y descubra como 
obtener el máximo de su TV
http://rd.pnaqr.com/TC-P00XT50/2/1/
UD@Q@@95@FOH@JOEC


 UD@Q@@95@FOH@JOEC


 






   
						

							2
This product incorporates the following software or technology:
(1) the software developed independently by or for Panasonic Corporati\
on,
(2) the software owned by third party and licensed to Panasonic Corpor\
ation,
(3) the software based in part on the work of the Independent JPEG Gro\
up,
(4) the software developed by the FreeType Project,
(5) the software licensed under the GNU LESSER GENERAL PUBLIC LICENSE (LGPL) and/or,
(6) open sourced software other than the software licensed under the L\
GPL.
(7) “PlayReady”(digital right management technology) licensed \
by Microsoft Corporation or its affiliates.
For the software categorized as (5), please refer to the terms and con\
ditions of LGPL, as the case may be at 
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
In addition, the software categorized as (5) are copyrighted by severa\
l individuals. 
Please refer to the copyright notice of those individuals at
http://www.am-linux.jp/dl/DTV12U/
The LGPL software is distributed in the hope that it will be useful, but 
WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or 
FITNESS FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic will giv\
e to any third party who contact us at the contact information 
provided below, for a charge no more than our cost of physically performing source cod\
e distribution, 
a complete machine-readable copy of the corresponding source code covere\
d under LGPL.
Contact Information
  [email protected]
Source code covered under LGPL is also freely available to you and any other member of the public via \
our website below.
http://www.am-linux.jp/dl/DTV12U/
For the software categorized as (5) and (6), please refer to the app\
licable license terms included in the “Setup” menu on product.
Further, for PlayReady categorized as (7), please be aware of the following.
(a) This product contains technology subject to certain intellectual propert\
y rights of Microsoft. Use or distribution of this 
technology outside of this product is prohibited without the appropriate\
 license(s) from Microsoft.
(b) Content owners use Microsoft PlayReady(TM) content access techno\
logy to protect their intellectual property, including 
copyrighted content. This device uses PlayReady technology to access PlayReady-protected cont\
ent and/or 
WMDRM-protected content. If the device fails to properly enforce restric\
tions on content usage, content owners may require 
Microsoft to revoke the device’s ability to consume PlayReady-protected content. Revocation should not \
affect unprotected 
content or content protected by other content access technologies.
Content owners may require you to upgrade PlayReady to access their cont\
ent.
If you decline an upgrade, you will not be able to access content that r\
equires the upgrade.
This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a\
 consumer to 
(i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a 
consumer engaged in a personal and non-commercial activity and/or was ob\
tained from a video provider licensed to provide 
AVC Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, 
LLC. 
See http://www.mpegla.com.
 
■Do not display a still picture for a long timeThis causes the image to remain on the plasma screen
(“Image retention”). This is not considered a malfunction and is not covered by the warranty.
4 : 312 To prevent the “Image retention”, the screen saver is 
automatically activated after a few minutes if no signals are 
sent or no operations are performed.
Typical still images
 
●Channel number and other logos 
●Image displayed in 4:3 mode 
●SD Card photo     ●Video game     ●Computer image
 
■Set up 
●Do not place the unit where it’s exposed to sunlight or other bright light (including reflections). 
●Use of some types of fluorescent lighting may reduce the remote control’\
s transmission range.
UD@Q@@95@FOH@JOEC


 UD@Q@@95@FOH@JOEC


 






 
						

							3
Basic
Advanced
Support Information
Getting started
VIERA Link™ is a trademark of 
Panasonic Corporation.
HDMI, the HDMI logo and High-
Definition Multimedia Interface are 
trademarks or registered trademarks 
of HDMI Licensing LLC in the United 
States and other countries.
SDXC Logo is a trademark of SD-
3C, LLC.
“AVCHD” and the “AVCHD” logo 
are trademarks of Panasonic 
Corporation and Sony Corporation.
“RealD 3D” is a trademark of RealD.
“Full HD 3D Glasses™” logo and 
“Full HD 3D Glasses™” word are 
trademark of Full HD 3D Glasses 
Initiative.
DLNA®, the DLNA Logo and DLNA 
CERTIFIED™ are trademarks, 
service marks, or certification 
marks of the Digital Living Network 
Alliance.
QuickTime and the QuickTime 
logo are trademarks or registered 
trademarks of Apple Inc., used 
under license there from.
This product qualifies for ENERGY 
STAR in the “Home Use” setting 
and this is the setting in which 
energy savings will be achieved. 
Any modifications to the “Home 
Use” setting or other factory default 
settings could result in greater energy 
consumption beyond levels that meet 
ENERGY STAR qualifications.
The Bluetooth
® word mark and logos are registered 
trademarks owned by Bluetooth SIG, Inc. and any use of 
such marks by Panasonic Corporation is under license. 
Other trademarks and trade names are those of their 
respective owners.
Manufactured under license from Dolby Laboratories. 
Dolby and the double-D symbol are trademarks of Dolby 
Laboratories.
HDAVI Control™ is a trademark of Panasonic Corporation.
• Watching TV ··················\
··················\
············· 15
• Using VIERA TOOLS ··················\
··················\
 17
• Watching content from external devices ······· 17
• Viewing 3D images on TV ··················\
·········· 18
• Using Media player ··················\
··················\
··· 20
• VIERA LinkTM “HDAVI ControlTM” ··················\
·· 25
• Using Network services ··················\
·············· 30• Network Connections ··················\
················ 30• Network settings ··················\
··················\
····· 31• Enjoy Online movies ··················\
················· 34• Using DLNA feature ··················\
··················\
 35
• Editing and Setting Channels ··················\
····· 36
• How to Use Menu Functions··················\
······· 38
• Technical Information ··················\
··················\
 39
• Care and Cleaning ··················\
··················\
···· 43
• Frequently Asked Questions (FAQ) ·············· 44
• Specifications··················\
··················\
············ 47
• Index ·················\
··················\
··················\
········ 48
• Limited Warranty 
(for U.S.A. and Puerto Rico only) ················· 49
• Customer Services Directory 
(for U.S.A. and Puerto Rico) ··················\
······· 50
• Limited Warranty (for Canada) ··················\
··· 51
Basic Features
Advanced Features
Support Information
• Safety Precautions··················\
··················\
······ 4
Please read before using the unit
• Accessories/Optional Accessories ··················\
 8
• Connections ···············\
··················\
················· 11
• Identifying Controls ··················\
··················\
··· 13
• First Time Setup··················\
··················\
········ 14
Getting started
Contents
UD@Q@@95@FOH@JOEC


 UD@Q@@95@FOH@JOEC


 






  
						

							4
 Safety Precautions
WARNING:To reduce the risk of fire or electric shock, do not expose this apparatu\
s to rain or moisture.
Do not place liquid containers (flower vase, cups, cosmetics, etc.) ab\
ove the set
(including on shelves above, etc.).
Important Safety Instructions
   
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
   
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service p\
ersonnel.
The lightning flash with 
arrowhead within a triangle is 
intended to tell the user that 
parts inside the product are a risk 
of electric shock to persons.
The exclamation point within a 
triangle is intended to tell the 
user that important operating 
and servicing instructions are in 
the papers with the appliance.
1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.
7)  Do not block any ventilation openings. Install in 
accordance with the manufacturer’s instructions.
8)  Do not install near any heat sources such as radiators,  heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.
9)  Do not defeat the safety purpose of the polarized or  grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade or the 
third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.
10)  Protect the power cord from being walked on or pinched  particularly at plugs, convenience receptacles, and the 
point where they exit from the apparatus. 11)  Only use attachments / accessories specified by the 
manufacturer.
12)  Use only with the cart, stand, tripod, bracket, or table specified by the 
manufacturer, or sold with the apparatus. 
When a cart is used, use caution when 
moving the cart / apparatus combination to 
avoid injury from tip-over.
13)  Unplug this apparatus during lightning storms or when  unused for long periods of time.
14)  Refer all servicing to qualified service personnel. Servicing  is required when the apparatus has been damaged in any 
way, such as power-supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the apparatus, 
the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.
15)  To prevent electric shock, ensure the grounding pin on the  AC cord power plug is securely connected.
WARNING/CAUTION (TV set)
WARNING
Small parts can present choking hazard if accidentally 
swallowed.
Keep small parts away from young children.
Discard unneeded small parts and other objects, 
including packaging materials and plastic bags/sheets to 
prevent them from being played with by young children, 
creating the potential risk of suffocation.
 
■Set up  This Plasma TV may fall and can cause personal injury or 
even death if not installed correctly. To prevent personal 
injury or death, follow these warnings:
 
●Install the Plasma TV in accordance with the 
manufacturer’s recommended pedestal or stand, 
corresponding hardware and installation instructions.
  This Plasma TV is for use only with the following  optional accessories. Use with any other type of optional 
accessories may cause instability. The following accessories 
are manufactured by Panasonic Corporation.•  Wall-hanging bracket (Angled) 
  
TY-WK4P1RW
 
●Be sure to ask a qualified technician to carry out the 
installation and set-up.
  Two or more people are required to install or remove the  television.
 
●Some wall mounts (wall-hanging brackets) are not 
designed to be mounted to walls with steel studs or old 
cinder block constructions.
  Ask your dealer or licensed contractor to properly secure  the wall-hanging bracket.
 
●Do not route the TV’s power cord inside the wall.
  The power cord was not designed for in-wall mounting. Doing so can lead to fire hazard.
 
●Do not place the Plasma TV or its stand on a sloped or 
unstable surface.
  The Plasma TV may fall or tip over.
 
●Do not support the Plasma TV on a non-specified 
pedestal.
 
●Do not place the Plasma TV on furniture that can easily 
be used as steps, such as a chest of drawers.
 
●Do not climb or allow children to climb on the Plasma TV
 
●Place or install the Plasma TV where it cannot be 
pushed, pulled over or knocked down.
 
●Route all cords and cables such that they cannot be 
tripped over or pulled by curious children.
 
●Do not place any objects on top of the Plasma TV.
  If water spills onto the Plasma TV or foreign objects get  inside it, a short-circuit may occur, which could result in 
fire or electric shock. If any foreign objects get inside the 
Plasma TV, please consult an Authorized Service Center.
UD@Q@@95@FOH@JOEC


 UD@Q@@95@FOH@JOEC


 






 
						

							5
 
● In the unlikely event that you receive a shock from this 
product, it is possible that your household outlet may 
be wired improperly.
  Have an electrician verify that the TV’s outlet is properly  wired. If the symptom persists, have the TV serviced by a 
qualified authorized technician.
 
●To prevent the spread of fire, keep candles 
or other open flames away from this 
product at all times
 
■AC Power Supply CordTo prevent fire or electric shock:
 
●The Plasma TV is designed to operate on a 120 V AC, 
60 Hz service. Insert the power cord plug as far as it will 
go into the wall socket.
  If the plug is not fully inserted, heat may generate, which  could cause a fire.
 
●The included power cord is for use with this unit only.
 
●Do not use any power cord other than that provided 
with this TV.
 
●Do not handle the power cord plug with wet hands.
 
●Do not do anything that might damage the power 
supply cord.
 
●When disconnecting the power supply cord, hold the 
plug, not the cord.
 
●Do not use the power supply cord if the plug or cord is 
damaged.
 
Replace the cord or contact your Authorized Service Center.
 
●Do not use a 3-prong to 2-prong AC plug adapters to 
connect your TV’s plug to the wall outlet.
  Doing so will defeat the TV plug’s safety feature, which  can lead to a shock hazard. If the wall outlet does not 
accommodate a 3-prong plug, have a qualified electrician 
replace your outlet and check the associated wiring.
 
■Handling the power supply cord
 
●Insert the power plug fully into the socket outlet. (If the 
power plug is loose, it could generate heat and cause fire.)
 
●Ensure that the power plug is easily accessible.
 
●Ensure the earth pin on the power plug is securely 
connected to prevent electrical shock.
•  An apparatus with CLASS I construction shall be  connected to a power socket outlet with a protective 
earthing connection.
 
●Do not touch the power plug with a wet hand. (This may 
cause electrical shock.)
 
●Do not use any power cord other than that provided 
with this TV. (This may cause fire or electrical shock.)
 
●Do not damage the power cord. (A damaged cord may 
cause fire or electrical shock.)
•  Do not move the TV with the cord plugged in the socket outlet.•  Do not place a heavy object on the cord or place the cord 
near a high-temperature object.
•  Do not twist the cord, bend it excessively, or stretch it.
•  Do not pull on the cord. Hold onto the power plug body  when disconnecting cord.
•  Do not use a damaged power plug or socket outlet.
 
●If a problem occurs (such as no picture or no sound), 
or if smoke or an abnormal odor is detected from the 
Plasma TV, unplug the power supply cord immediately.
  Continued use of the TV under these conditions might  cause a fire or permanent damage to the TV. Have the TV 
evaluated by an Authorized Service Center. Servicing of the 
TV by unauthorized personnel is strongly discouraged due 
to its high voltage.
 
●If water or an object gets inside the Plasma TV, if the 
Plasma TV is dropped, or if the enclosure becomes 
damaged, unplug the power supply cord immediately.
  A short-circuit may occur, which could cause a fire. Contact  an Authorized Service Center for an evaluation.
 
■Radio waves
 
●Do not place this TV in any medical institutions or 
locations with medical devices.
  Radio waves from this TV may interfere with the medical  devices and cause accidents due to the malfunction.
 
●Do not use this TV near any automatic control devices 
such as automatic doors or fire alarms.
  Radio waves from this TV may interfere with the automatic  control devices and cause accidents due to the malfunction.
 
●Keep this TV away at least 9 inches (22 cm)  from the 
location where a cardiac pacemaker is implanted.
  Radio waves from this TV may interfere with the operation  of the pacemaker.
CAUTION
 
●Do not cover the ventilation holes.
  Doing so may cause the Plasma TV to overheat, which can  cause a fire or damage to the Plasma TV.
 
●Leave a space of 3 15/16” (10 cm) or more at the top, 
left and right, and 2 3/4” (7 cm) or more at the rear. 
 
●When using the pedestal, keep the space between the 
bottom of the TV and the pedestal or stand surface 
clear from objects that may obstruct ventilation.
 
■When Moving the Plasma TV
 
●Be sure to disconnect all cables before moving the 
Plasma TV.
  Moving the TV with its cables attached might damage the  cables which, in turn, can cause fire or electric shock.
 
●To prevent an electric shock, disconnect the power 
plug from the wall outlet as a safety precaution before 
carrying out any cleaning.
 
●Transport only in upright position.
  Transporting the unit with its display panel facing upright or  downward may cause damage to the internal circuitry.
 
●Using a dry cloth, clean any dust from the power supply 
cord and plug regularly.
  Build-up of dust on the power cord plug can increase  humidity, which might damage the insulation and cause a 
fire.
This Plasma TV radiates infrared rays; 
  therefore, it may affect other infrared communication  equipment. Install your infrared sensor in a place away from 
direct or reflected light from your Plasma TV.
The TV will still consume some power as long as the 
power supply cord is connected to the wall outlet.
 
●Display panel is made of glass. Do not apply strong 
force or impact to the display panel.
  This may cause damage resulting in injury.
 
●The TV is heavy. TV should be handled by 2 or more 
people. Support as shown to avoid injury by the TV 
tipping or falling.
 
UD@Q@@95@FOH@JOEC


 UD@Q@@95@FOH@JOEC


 






 
						

							6
CEA CHILD SAFETY NOTICES
WARNING
Flat panel displays are not always supported on the proper stands 
or installed according to the manufacturer’s recommendations. 
Flat panel displays that are inappropriately situated on dressers, 
bookcases, shelves, desks, speakers, chests or carts may fall 
over and may cause personal injury or even death. 
The consumer electronics industry (of which Panasonic is 
a member) is committed to making home entertainment 
enjoyable and safe. To prevent personal injury or death, be 
sure to follow the following safety guidelines: 
TUNE INTO SAFETY: 
•  One size does NOT fit all.  Follow the manufacturer’s recommendations for the safe installation and use of your 
flat panel display. 
•  Carefully read and understand all enclosed instructions for  proper use of this product. 
•  Don’t allow children to climb on or play with furniture and  television sets. 
•  Don’t place flat panel displays on furniture that can easily be  used as steps, such as a chest of drawers. 
•  Remember that children can become excited while watching  a program, especially on “larger than life”  flat panel 
displays.  Care should be taken to install the display where it 
cannot be pushed, pulled over, or knocked down. 
•  Care should be taken to route all cords and cables  connected to the flat panel display so that they cannot be 
pulled or grabbed by curious children.  WALL MOUNTING:
 IF YOU DECIDE TO WALL MOUNT 
YOUR FLAT PANEL DISPLAY, ALWAYS: 
•  Use a mount that has been recommended by the display  manufacturer and/or listed by an independent  laboratory 
(such as UL, CSA, ETL). 
•  Follow all instructions supplied by the display and wall  mount manufacturers. 
•  If you have any doubts about your ability to safely  install your flat panel display, contact your retailer about 
professional installation. 
•  Make sure the wall where you are mounting the display  is appropriate.  Some wall mounts are not designed to 
be mounted to walls with steel studs or old cinder block 
construction.  If you are unsure, contact a professional installer. 
•  A minimum of two people are required for installation.  Flat panel displays can be heavy. 
Panasonic recommends that a qualified installer perform 
the wall-mount installation. See page 4.
The American Academy of Pediatrics discourages 
media use by children younger than two years. 
For more information, visit www.aap.org.
WARNING/CAUTION (3D Eyewear)
WARNING
 
■Accidental Ingestion 
●Keep 3D Eyewear parts in places out of the reach of children. There is a danger small children could swallow such parts by mistake.•  If a child accidentally swallows such parts, seek 
immediate medical attention.
 
■Place 
●Do not use 3D Eyewear in hospital or other medical facilities. Radio waves from 3D Eyewear may cause interference of 
medical equipments. 
●Do not use 3D Eyewear nearby automatic control equipments, 
like a automatic door, a fire alarm apparatus, etc.
  Radio waves from 3D Eyewear may cause interference of 
automatic control equipments.
 
●Keep 3D Eyewear more than 22 cm (9 in.) away from the implant of cardi\
ac 
pacemaker, or similar implantable medical equipments, at all times.
  Radio waves from 3D Eyewear may affect implantable 
cardiac pacemaker or similar equipment operations.
 
■Disassembly 
●Do not disassemble or modify the 3D Eyewear.
CAUTION
 
■3D Eyewear 
●Handle the 3D Eyewear carefully and store in the case 
when not in use.
  Failure to do so may damage the Eyewear and glass  section, which may result in injury.
 
●Handle the tips of the frame carefully when putting on 
the 3D Eyewear as inserting the tip of the frame into the 
eye may cause injury.
 
●Be careful not to close the hinge section of the 3D 
Eyewear on your finger.
  Doing so may result in injury. •  Provide supervision when children are using this product.
 
■Use of 3D Eyewear 
●Parents/guardians should monitor children’s viewing 
habits to avoid their prolonged use without rest 
periods.
 
●In commercial application and public viewing, someone 
in authority should convey the precautions and monitor 
the user of the 3D Eyewear.
 
●Use only the 3D Eyewear recommended for this TV. 
●Only use the 3D Eyewear for its intended 3D content 
viewing purpose.
 
●Do not move around while wearing the 3D Eyewear.
  The surrounding area appears dark, which may result in  falling or other accidents that may cause injury.
 
●Inspect the 3D Eyewear for damage before each use.
 
■Viewing of 3D Images 
●In the event that you experience dizziness, nausea, or 
other discomfort while viewing 3D images, discontinue 
use and rest your eyes.
•  When you set the effect by using “3D adjustment”, take  into account that the vision of 3D images varies among 
different individuals.
 
●Do not use if the 3D Eyewear is cracked or broken. 
●Content for 3D viewing includes commercially available 
Blu-ray discs, 3D broadcasts, etc..
 
●When preparing your own 3D content, ensure that it is 
properly produced.
UD@Q@@95@FOH@JOEC


 UD@Q@@95@FOH@JOEC


 






 
						

							7
FCC and IC STATEMENT
This equipment has been tested and found to comply with the limits for a\
n Other Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmf\
ul interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy an\
d, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. Ho\
wever, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful\
 interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by o\
ne or more of the
following measures:•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the Panasonic Service Center or an experienced radio/TV technici\
an for help.
FCC Caution: 
To assure continued compliance, follow the attached installation instruct\
ions and use only shielded interface cables
when connecting to peripheral devices. Any changes or modifications not expressly approved by Panasonic Corp. o\
f
North America could void the user’s authority to operate this device.
FCC and Industry Canada (IC) RF Exposure Warning:  •  This TV is equipped with one transmitter interface for insertion of only\
 approved transmitters:Wistron NeWeb USB Bluetooth Adapter with FCC ID: NKR-DBUBP207.
•  The transmitter interface must not be used with other wireless transmitt\
ers, unless specifically recommended when  they become available. Other third-party wireless transmitters have not \
been RF exposure evaluated for use with 
this TV and may not comply with FCC and IC RF exposure requirements.
•  The transmitter complies with FCC and IC radiation exposure limits set f\
orth for an uncontrolled environment  for mobile use with minimum 20 cm (8 inches) spacing requirement betwe\
en transmitters and all person’s body 
(excluding extremities of hands, wrist and feet) during wireless modes\
 of operation.
Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094
Contact Source:  Panasonic Consumer Marketing Company of North America
1-877-95-VIERA (958-4372)
email: 
[email protected]
This device complies with Part 15 of the FCC Rules and all applicable IC\
 RSS standards. 
Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and (2) this device mu\
st accept any interference received, including 
interference that may cause undesired operation.
 
■About  wireless LAN adapter (Optional Accessory) 
●Wireless LAN adapter and Access point need to be obtained separately.
For the latest information on applicable wireless LAN adapters, check th\
e following website: 
http://Panasonic.com/NetConnect 
 
●Check that the Access point supports WPS*. 
(If it does not support WPS, “Password” of the Access point is required when configuring settings.)
 
●Follow the instructions on the Access point setup screen and configure the appropriate security setting\
s.
For more details on setting of Access point, please refer to operating manual for the Access point.
 
●We recommend using 11n (5 GHz) for the wireless system between the wireless LAN adapter an\
d Access point.
Communication is also possible with 11a, 11b, and 11g (2.4 GHz), but the communication speed may be slower.
 
●If the wireless system of the Access point is changed, devices that could connect by wireless LAN may \
no longer be 
able to connect.
 
●When Online Movies, DLNA, or other device is using the network, do not d\
isconnect the wireless LAN adapter. 
●Data transmitted and received over radio waves may be intercepted and mo\
nitored. 
●Keep the TV away from the following devices as much as possible:
Wireless LAN, microwaves, and other devices that use 2.4 GHz and 5 GHz s\
ignals. Otherwise, the TV failures such 
as malfunction may occur due to the radio wave interference.
 
●When noises occur due to the static electricity, etc., the TV might stop operating for the protection of the devices. In 
this case, turn the TV Off with power On / Off switch, then turn it On again.
* WPS: Wi-Fi Protected Setup
UD@Q@@95@FOH@JOEC


 UD@Q@@95@FOH@JOEC


 






 
						

							8
Accessories/Optional Accessories
 Accessories
Remote Control 
Transmitter
 N2QAYB000704
Batteries for the
Remote Control
Transmitter (2)
 AA Battery
Power cord
Accessories
Check you have all the items shown.
Quick start guide
Owner’s Manual
Product Registration Card 
(U.S.A.)
Child safety
Optional AccessoriesPlease contact your nearest Panasonic dealer to purchase the recommended\
 
Optional accessories. For additional details, please refer to the Option\
al 
accessories installation manual.
 3D Eyewear (Rechargeable type) 
●TY-ER3D4S 
●TY-ER3D4M •  Use Panasonic 3D Eyewear supporting Bluetooth wireless technology.
•  Product information (Model No. and release date etc.) is subject to ch\
ange without notice. •  For more product information
(USA) http://www.panasonic.com  (Canada) http://panasonic.ca
(Global reference) http://panasonic.net/avc/viera/3d/
Wireless Adapter 
●TY-WL20U
Wall-hanging bracket 
●TY-WK4P1RW 
 a:  15.7” (400 mm) 
b: 11.8” (300 mm)
The angle of wall-hanging bracket 
can be adjusted in “zero tilting 
(vertical)” and “5, 10 or 15-degree 
tilting” for this TV.
Rear of the TV
Holes for wall-hanging 
bracket installation Screw for attaching the TV to the wall-hanging bracket 
(not supplied with the TV)
Depth of screw:
minimum 0.67” (17.0 mm), 
maximum  1.38” (35.0 mm)
(View from the side)
a b
M8
Warning
 
●In order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licensed 
contractor to secure the wall-hanging brackets.
 
●Carefully read the instructions accompanying optional accessories, and b\
e absolutely sure to take steps to prevent 
the TV from tipping over.
 
●Handle the TV carefully during installation since subjecting it to impact or other \
forces may cause product damage. 
●Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the 
wall before hanging bracket.
 
●When using the angled-type wall hanging bracket, please ensure that ther\
e is sufficient space for the connecting 
cables not to press against the wall when the TV is tilted forward.
 
●For safety reasons, remove units no longer being used from their wall-mo\
unted locations.
 Pedestal
How to assemble 
(p. 9)
Ferrite core
for HDMI cable (2) 
for USB cable (2)
UD@Q@@95@FOH@JOEC


 UD@Q@@95@FOH@JOEC


 






 
						

							9
Getting started
 Accessories/Optional Accessories
Accessories
Assembly screws
  XYN4+F10FNK  (Black)
  size (M4 x 10)  (5)
  XYN5+F16FN  (silver)
  size (M5 x 16) (7)
Bracket (1)
 TBL5ZA3238
Neck (1)
 TXFBL5Z0069
Cover (1)
 TXFBL5Z0071
  Cover is in the same bag  with Owner’s Manual
Base (1)
  TBL5ZX0292 (for 42”)  TBL5ZX0294 (for 50”)
 Attaching the pedestal to TV
■Assembling the pedestal
 Insert the protrusion of the Neck into  the Base firmly.
Neck
Protrusion of the 
Neck (bottom)
Front
 Turn the stand over and fix stand neck securely with assembly screws. 
(3 screws)
•  
Do not hold the neck when turning over the stand.
B x 3 pcs.
Front
Back of Stand Hole for 
screw
 Attach the Bracket to the protrusion 
of Neck.
Make sure that the bracket is 
anchored before fixing the screws.
Fix securely with assembly screws 
(4 screws)
B x 4 pcs.
Bracket
Protrusion of Neck (top)
 Attach the cover and fix securely with assembly screw. 
A x 1 pcs.
Cover
■Set-up   Tighten assembly screws  (total 4 screws) loosely at first,
    then tighten them firmly to fix securely.
A  x 4 pcs.
Arrow 
mark Rear side
Rear view
Hole for pedestal 
installation 
Bracket
 Base   
(Image)Work on a flat surface
Removing the pedestal from the TVBe sure to remove the pedestal in the following way when 
using the wall hanging bracket or repacking the TV. 
 Remove the assembly screws  from the TV.  Lift the TV from the pedestal.  Remove the assembly screw  from the cover.  Pull out the cover.  Remove the assembly screws  from the Bracket.   Remove the assembly screws  from the Back of 
stand and pull out the neck.
Warning
Do not disassemble or modify the pedestal.
 Otherwise, the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
 Otherwise, the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged. If you use the pedestal when it is physically damaged, personal injury m\
ay result. Contact your nearest Panasonic Dealer immediately.During set-up, make sure that all screws are securely tightened. If sufficient care is not taken to ensure screws are properly tightened during\
 assembly, the pedestal will not be strong 
enough to support the TV, and it might fall over and become damaged, and personal injury may res\
ult.
When removing the pedestal, do not remove the pedestal by any methods ot\
her than the specified procedure. (Above) Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury\
 may result.
UD@Q@@95@FOH@JOEC


 UD@Q@@95@FOH@JOEC


 






 
						

							10
Power cord connection
To attachTo remove
Insert it firmly until the 
tabs on both sides click 
into place. Keep pushing both 
sides until they snap 
and pull.
Attaching Ferrite Core
Be sure to attach the provided ferrite core to the HDMI cable/USB cable \
(not supplied)  to reduce interference or electrical 
noise.
Attach the ferrite core as close as 
possible to connector on the TV side as 
shown.Close the ferrite core until it clicks.
(example: USB connecter)
 Installing the remote’s batteries
Open
Hook
Note the correct polarity
(+ or -). Close
Caution
  Incorrect installation may cause 
battery leakage and corrosion, 
resulting in damage to the remote 
control.
• Do not mix old and new batteries.
• Do not mix different battery types (such 
as alkaline and manganese batteries).
• Do not use rechargeable (Ni-Cd) 
batteries.
  Do not burn or break batteries.
UD@Q@@95@FOH@JOEC


 UD@Q@@95@FOH@JOEC