Panasonic 42"50" Class 720p Plasma Hdtv Tc 42px24 Operating Instructions

							
TM
Operating Instructions
42”/50” Class 720p Plasma HDTV
(41.6/49.9 inches measured diagonally)
Manual de instrucciones
Televisión de alta definición de 720p y 
clase 42”/50” de Plasma
(41,6/49,9 pulgadas medidas diagonalmente)
For more detailed instructions, refer to the Operating Instructions 
on the CD-ROM.
To view the Operating Instructions on the CD-ROM, you need a 
computer equipped with a CD-ROM drive, and Adobe® Reader® 
(Version 7.0 or later is recommended) installed on your computer.
Depending on the operating system or settings on your computer, the 
Operating Instructions may not start automatically.
In this case, open the PDF file under the “MANUAL” folder manually\
 to view 
the instructions.
Para obtener instrucciones más detalladas, consulte las instrucciones\
 
de manejo contenidas en el CD-ROM.
Para ver las instrucciones de manejo contenidas en el CD-ROM, se 
necesita un ordenador equipado con una unidad de CD-ROM, y que 
tenga instalado Adobe® Reader® (se recomienda la versión 7.0 o 
posterior).
Dependiendo del sistema operativo o de las configuraciones del ordenador\
, 
las  nstrucciones de manejo pueden no iniciarse automáticamente.
En tal caso, abra manualmente el archivo PDF en “MANUAL” carpeta p\
ara 
visualizar las instrucciones.
TQB2AA0576
Gracias por su decisión de comprar este producto marca Panasonic.Lea estas instrucciones antes de utilizar su televisor y guárdelas pa\
ra consultarlas en el futuro.Las imágenes mostradas en este manual tienen solamente fines ilustrat\
ivos.
Model No.
Número de modelo
TC-42PX24
TC-50PX24
Español
EnglishThank you for purchasing this Panasonic product.Please read these instructions before operating your set and retain them\
 for future reference.The images shown in this manual are for illustrative purposes only.
For assistance (U.S.A./Puerto Rico), please call: 
1-877-95-VIERA (958-4372) or visit us at www.panasonic.com/contactinfo 
For assistance (Canada), please call: 
1-866-330-0014  or visit us at www.vieraconcierge.ca
Para solicitar ayuda (EE.UU./Puerto Rico), llame al: 
1-877-95-VIERA (958-4372) ó visítenos en www.panasonic.com/contactinfo 
● Safety Precautions .................................2● Note .......................................................5● Accessories/Optional Accessory ............6● Basic Connection ...................................9● Identifying Controls .............................. 11● First Time Setup ...................................12●  How to Use Menu Functions ................15● FAQ ......................................................18● Limited Warranty (for U.S.A. and Puerto Rico only) .........20
●  Customer Services Directory(for U.S.A. and Puerto Rico) ................21
●  Limited Warranty (for Canada) .............22
Please read before using the unit
Contents
UD @ Q  @ @Q Y @F O H@ ›@ J O EC 


UD@Q@@QY@FOH@›@JOEC


   


   


 
						

							
2
1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.
7)  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8)  Do not install near any heat sources such as radiators,  heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.
9)  Do not defeat the safety purpose of the polarized or  grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade or the 
third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.
10)  Protect the power cord from being walked on or pinched  particularly at plugs, convenience receptacles, and the 
point where they exit from the apparatus. 11)  Only use attachments / accessories specified by the 
manufacturer.
12)  Use only with the cart, stand, tripod, bracket, or table specified by the 
manufacturer, or sold with the apparatus. 
When a cart is used, use caution when 
moving the cart / apparatus combination 
to avoid injury from tip-over.
13)  Unplug this apparatus during lightning storms or when  unused for long periods of time.
14)  Refer all servicing to qualified service personnel.  Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or plug 
is damaged, liquid has been spilled or objects have fallen 
into the apparatus, the apparatus has been exposed to 
rain or moisture, does not operate normally, or has been 
dropped.
15)  To prevent electric shock, ensure the grounding pin on the  AC cord power plug is securely connected.
WARNING
Small parts can present choking hazard if accidentally 
swallowed.
Keep small parts away from young children.
Discard unneeded small parts and other objects, 
including packaging materials and plastic bags/sheets to 
prevent them from being played with by young children, 
creating the potential risk of suffocation.
 Set up  This Plasma TV may fall and can cause personal injury or even death if not installed correctly. To prevent personal 
injury or death, follow these warnings:
  Install the Plasma TV in accordance with the  manufacturer’s recommended pedestal or stand, 
corresponding hardware and installation instructions.
  This Plasma TV is for use only with the following  optional accessories. Use with any other type of 
optional accessories may cause instability. The following 
accessories are manufactured by Panasonic Corporation.•  Wall-hanging bracket (Angled) 
    TY-WK4P1RW   Be sure to ask a qualified technician to carry out the 
installation and set-up.
  Two or more people are required to install or remove the  television.
  Some wall mounts (wall-hanging brackets) are not  designed to be mounted to walls with steel studs or old 
cinder block constructions.
  Ask your dealer or licensed contractor to properly secure  the wall-hanging bracket.
  Do not route the TV’s power cord inside the wall.
  The power cord was not designed for in-wall mounting.  Doing so can lead to fire hazard.
  Do not place the Plasma TV or its stand on a sloped or  unstable surface.
  The Plasma TV may fall or tip over.  Do not support the Plasma TV on a non-specified pedestal.
  Do not place the Plasma TV on furniture that can easily be used as steps, such as a chest of drawers.
 
Do not climb or allow children to climb on the Plasma TV  Place or install the Plasma TV where it cannot be  pushed, pulled over or knocked down.
  Route all cords and cables such that they cannot be  tripped over or pulled by curious children.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatu\
s to rain or moisture.
Do not place liquid containers (flower vase, cups, cosmetics, etc.) ab\
ove the set
(including on shelves above, etc.).
  
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
  
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service p\
ersonnel.
The lightning flash with 
arrowhead within a triangle is 
intended to tell the user that 
parts inside the product are a risk 
of electric shock to persons.
The exclamation point within 
a triangle is intended to 
tell the user that important 
operating and servicing 
instructions are in the papers 
with the appliance.
Safety Precautions
Important Safety Instructions
WARNING/CAUTION
UD @ Q  @ @Q Y @F O H@ ›@ J O EC 


UD@Q@@QY@FOH@›@JOEC


   


   


 
						

							
3
  Do not place any objects on top of the Plasma TV.
  If water spills onto the Plasma TV or foreign objects get  inside it, a short-circuit may occur which could result in 
fire or electric shock. If any foreign objects get inside the 
Plasma TV, please consult an Authorized Service Center.
  In the unlikely event that you receive a shock from this  product it is possible that your household outlet may be 
wired improperly. Have an electrician verify that the TV’s 
outlet is properly wired. If the symptom persists, have the 
TV serviced by a qualified authorized technician.
 AC Power Supply CordTo prevent fire or electric shock:  The Plasma TV is designed to operate on a 120 V AC, 60 Hz service. Insert the power cord plug as far as it 
will go into the wall socket.
  If the plug is not fully inserted, heat may generate, which  could cause a fire.
  The included power cord is for use with this unit only.
  Do not use any power cord other than that provided  with this TV.
  Do not handle the power cord plug with wet hands.
  Do not do anything that might damage the power supply cord.
  When disconnecting the power supply cord, hold the  plug, not the cord.
  Do not use the power supply cord if the plug or cord is  damaged.
 Replace the cord or contact your Authorized Service Center.  Do not use a 3-prong to 2-prong AC plug adaptors to connect your TV’s plug to the wall outlet.
  Doing so will defeat the TV plug’s safety feature, which  can lead to a shock hazard. If the wall outlet does not 
accommodate a 3-prong plug, have a qualified electrician 
replace your outlet and check the associated wiring.
 Handling the power supply cord Insert the power plug fully into the socket outlet. (If the 
power plug is loose, it could generate heat and cause fire.)
  Ensure that the power plug is easily accessible.
  Ensure the earth pin on the power plug is securely connected to prevent electrical shock.
•  An apparatus with CLASS I construction shall be  connected to a power socket outlet with a protective 
earthing connection.
  Do not touch the power plug with a wet hand. (This may cause electrical shock.)
  Do not use any power cord other than that provided  with this TV. (This may cause fire or electrical shock.)
  Do not damage the power cord. (A damaged cord may  cause fire or electrical shock.)•  Do not move the TV with the cord plugged in the socket  outlet.
•  Do not place a heavy object on the cord or place the cord  near a high-temperature object.
•  Do not twist the cord, bend it excessively, or stretch it.
•  Do not pull on the cord. Hold onto the power plug body  when disconnecting cord.
•  Do not use a damaged power plug or socket outlet.
  If a problem occurs (such as no picture or no sound),  or if smoke or an abnormal odor is detected from the 
Plasma TV, unplug the power supply cord immediately.
  Continued use of the TV under these conditions might  cause a fire or permanent damage to the TV. Have the TV 
evaluated by an Authorized Service Center. Servicing of the 
TV by unauthorized personnel is strongly discouraged due 
to its high voltage.   If water or an object gets inside the Plasma TV, if the 
Plasma TV is dropped, or if the enclosure becomes 
damaged, unplug the power supply cord immediately.
  A short-circuit may occur, which could cause a fire. Contact  an Authorized Service Center for an evaluation.
CAUTION
  Do not cover the ventilation holes.
  Doing so may cause the Plasma TV to overheat, which can  cause a fire or damage to the Plasma TV.
  Leave a space of 3 15/16” (10 cm) or more at the top,  left and right, and 2 3/4” (7 cm) or more at the rear. 
  When using the pedestal, keep the space between the bottom of the TV and the pedestal or stand surface 
clear from objects that may obstruct ventilation.
 When Moving the Plasma TV  Be sure to disconnect all cables before moving the Plasma TV.
  Moving the TV with its cables attached might damage the  cables which, in turn, can cause fire or electric shock.
  To prevent an electric shock, disconnect the power plug from the wall outlet as a safety precaution before 
carrying out any cleaning.
  Transport only in upright position.
  Transporting the unit with its display panel facing upward or  downward may cause damage to the internal circuitry.
  Using a dry cloth, clean any dust from the power  supply cord and plug regularly.
  Build-up of dust on the power cord plug can increase  humidity, which might damage the insulation and cause a 
fire.
This Plasma TV radiates infrared rays; 
  therefore, it may affect other infrared communication  equipment. Install your infrared sensor in a place away from 
direct or reflected light from your Plasma TV.
The TV will still consume some power as long as the 
power supply cord is connected to the wall outlet.
  Display panel is made of glass. Do not apply strong force or impact to the display panel.
  This may cause damage resulting in injury.
  The TV is heavy. TV should be handled by 2 or more people. Support as shown to avoid injury by the TV 
tipping or falling.
 
UD @ Q  @ @Q Y @F O H@ ›@ J O EC 


UD@Q@@QY@FOH@›@JOEC


   


   


 
						

							
4
     
CEA CHILD SAFETY NOTICES:  Flat panel displays are not always supported on the proper stands or
installed according to the manufacturer’s recommendations.  Flat panel displays that are inappropriately
situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause
personal injury or even death.
The consumer electronics industry (of which Panasonic is a member) is committed to making home entertainment
enjoyable and safe. To prevent personal injury or death, be sure to follow the following safety guidelines:
TUNE INTO SAFETY:
•One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use
of your flat panel display.
• Carefully read and understand all enclosed instructions for proper use of this product.
• Don’t allow children to climb on or play with furniture and television sets.
• Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.
•
Remember that children can become excited while watching a program, especially on “larger than life” flat panel
displays.  Care should be taken to install the display where it cannot be pushed, pulled over, or knocked down.
• Care should be taken to route all cords and cables connected to the flat panel display so that they
cannot be pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
• Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL, CSA, ETL).
• Follow all instructions supplied by the display and wall mount manufacturers.
• If you have any doubts about your ability to safely install your flat panel display, contact your retailer
about professional installation.
• Make sure the wall where you are mounting the display is appropriate.  Some wall mounts are not
designed to be mounted to walls with steel studs or old cinder block construction.  If you are unsure,
contact a professional installer.
• A minimum of two people are required for installation.  Flat panel displays can be heavy.
Panasonic recommends that a qualified installer perform the wall-mount
installation.  See page 4.
The American Academy of Pediatrics discourages television viewing for ch\
ildren younger than 
two years of age.
This product incorporates the following software:
(1) software developed independently by or for Panasonic Corporation,
(2) software owned by a third party and licensed to Panasonic Corporat\
ion,
(3) software licensed under the GNU General Public License, Version 2 \
(GPL v2),
(4) software licensed under the GNU LESSER General Public License (LG\
PL) and/or,
(5) open source software other than software licensed under the GPL an\
d/or LGPL
For the software categorized as (3) or (4), please refer to the term\
s and conditions of GPL v2 and LGPL, as the 
case may be at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and\
 
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html  
In addition, software categorized as (3) or (4) is copyrighted by se\
veral individuals and/or entities. Please refer 
to the copyright notice of those individuals at 
http://www.am-linux.jp/dl/DTV10UT/.
GPL/LGPL SOFTWARE IS DISTRIBUTED IN THE HOPE THAT IT WILL BE USEFUL, BUT\
 WITHOUT ANY 
WARRANTY, EXPRESS, IMPLIED OR STATUTORY, INCLUDING THE IMPLIED WARRANTIE\
S OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
For at least three (3) years from delivery of products, Panasonic will\
 give to anyone who contacts us at the 
address provided below, for a charge of no more than our cost of physica\
lly performing source code 
distribution, a complete machine-readable copy of the corresponding sour\
ce code covered under GPL v2/LGPL.
Contact Information
[email protected]
Source code is also freely available to you and any other member of the \
public via our website below.
http://www.am-linux.jp/dl/DTV10UT/
Safety Precautions (Continued)
U D @ Q  @ @Q Y @F O H@ ›@ J O EC 


UD@Q@@QY@FOH@›@JOEC


   


   


 
						

							
5
 Do not display a still picture for a long timeThis causes the image to remain on the plasma screen
(“Image retention”). This is not considered a malfunction and is not covered by the warranty.
4 : 312To prevent the “Image retention”, the screen saver is 
automatically activated after a few minutes if no signals are 
sent or no operations are performed.
Typical still images
• Channel number and other logos
• Image displayed in 4:3 mode
• SD Card photo     • Video game     • Computer image
 Set up Do not place the unit where it’s exposed to sunlight or other bright light (including reflections). Use of some types of fluorescent lighting may reduce the remote control’\
s transmission range.
Notes
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a\
 Class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection against harmf\
ul interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy an\
d, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. Ho\
wever, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause harmful\
 interference to radio or television reception, which c an be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by o\
ne or more of the  
following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject\
 to the following two conditions: (1) This device may 
not cause harmful interference, and (2) this device must accept any in\
terference received, including interference that may caus e 
undesired operation.
FCC Caution:
To assure continued compliance, follow the attached installation instruct\
ions and use only shielded interface cables 
when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by 
Panasonic Corp. of North America could void the user’s authority to operate this device.
FCC Declaration of ConformityModel No. TC-42PX24, TC-50PX24
Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094
Contact Source: Panasonic Consumer Electronics Company 1-877-95-VIERA (958-4372)
email: [email protected]
CANADIAN NOTICE:
For Model TC-42PX24, TC-50PX24
This Class B digital apparatus complies with Canadian ICES-003.
U D @ Q  @ @Q Y @F O H@ ›@ J O EC 


UD@Q@@QY@FOH@›@JOEC


   


   


 
						

							
6
Accessories/Optional Accessory
Accessories
Remote Control 
Transmitter
 N2QAYB000485
Batteries for the
Remote Control
Transmitter (2)
 AA Battery
AC cord
Pedestal
 TBLX0134 (TC-42PX24) TBLX0135 (TC-50PX24)
Product Registration Card (U.S.A.) Operating Instructions (Book)
VIERA Concierge and Quick start guide
Installing the remote’s batteries
Open
Hook
Note the correct polarity
(+ or -).
Close
Caution
 Incorrect installation may cause 
battery leakage and corrosion, 
resulting in damage to the remote 
control.
• Do not mix old and new batteries.
• Do not mix different battery types (such  as alkaline and manganese batteries).
• Do not use rechargeable (Ni-Cd) batteries.
 Do not burn or break batteries.
Optional AccessoryPlease contact your nearest Panasonic dealer to purchase the recommended\
 
wall-hanging bracket. For additional details, please refer to the wall-h\
anging 
bracket installation manual.
Wall-hanging bracket
(angle)
 TY-WK4P1RW
 a:   15.7” (400 mm)
b: 11.8” (300 mm)
Rear of the TV
Holes for wall-hanging 
bracket installation Screw for fixing the TV onto the wall-hanging bracket 
(not supplied with the TV)
Depth of screw:
minimum 0.59” (15.0 mm), 
maximum  1.18” (30.0 mm)
(View from the side)
a b
Warning
  In order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licenced 
contractor to secure the wall-hanging brackets.
  Carefully read the instructions accompanying optional accessories, and b\
e absolutely sure to take steps to prevent the TV from tipping over.
 Handle the TV carefully during installation since subjecting it to impact or other \
forces may cause product damage.  Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging bracket.
  When using the angled-type wall hanging bracket, please ensure that ther\
e is sufficient space for the connecting cables not to press against the wall when the TV is tilted forward.
  For safety reasons, remove units no longer being used from their wall-mo\
unted locations.
How to assemble (p. 7)
Accessories
Check you have all the items shown.
M8
Operating Instructions (CD-ROM)
TC-42PX24 TC-50PX24
UD @ Q  @ @Q Y @F O H@ ›@ J O EC 


UD@Q@@QY@FOH@›@JOEC


   


   


 
						

							
7
Accessories
Assembly screws 
(4 of each)
 
A
 XYN5+F18FN 
  M5 × 18 (Silver)
B
  THEL078N (for 42”)
  THEL080N (for 50”)
  M5 × 30 (Black)
Poles (2)
LR
  L or R is printed at the 
bottom of the poles.
 Base (1)
Attaching the pedestal to TV
■Assembling the pedestal
   Fix securely with assembly screws A. (Total 4 screws)
   Tighten screws firmly.
A
L
RPole
Front
Pole
Base
■Set-up
  Carry out work on a horizontal and level surface.
   Tighten screws firmly.
B
 Fix securely with assembly 
screws B. (Total 4 screws)
Rear side
Arrow 
mark
Pole Hole for pedestal 
installation 
Pole
 Base 
Bottom view
Warning
Do not disassemble or modify the pedestal.
 Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
 Otherwise the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged. If you use the pedestal when it is physically damaged, personal injury m\
ay result. Contact your nearest Panasonic 
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
 If sufficient care is not taken to ensure screws are properly tightened during\
 assembly, the pedestal will not be strong 
enough to support the TV, and it might fall over and become damaged, and personal injury may res\
ult.
(Image: TBLX0135)
(Image: TC-50PX24)
UD @ Q  @ @Q Y @F O H@ ›@ J O EC 


UD@Q@@QY@FOH@›@JOEC


   


   


 
						

							
8
Accessories/Optional Accessory (Continued)
AC cord connection
To attach To remove
Insert it firmly until the 
tabs on both sides click 
into place.Keep pushing both 
sides until they snap 
and pull.
U
D @ Q  @ @Q Y @F O H@ ›@ J O EC 


UD@Q@@QY@FOH@›@JOEC


   


   


 
						

							
9
To connect the antenna terminal
Basic Connection
Note
 Not all cables and external equipment shown in this book are supplied wi\
th the TV. For more details on the external equipment’s connections, please refer to the operating manuals for the equipment. When disconnecting the power cord, be absolutely sure to disconnect the \
power cord plug from the wall outlet first. For additional assistance, visit us at:   www.panasonic.com
www.panasonic.ca
ExampleConnecting Antenna (To watch TV)
VHF/UHF Antenna
• NTSC (National Television System Committee):
Conventional broadcasting
• ATSC (Advanced Television Systems Committee):
Digital TV Standards include digital high-definition television (HDTV), 
standard-definition television (SDTV), data broadcasting, multi-
channel surround-sound audio and interactive television.
AC Cord
(Connect after all the 
other connections have 
been made.)
Back of the TV
Cable TV AC 120 V
60 Hz
VHF/UHF Antenna
or
Cable
• You need to subscribe to a cable TV service to enjoy viewing their programming.
• You can enjoy high-definition programming by subscribing to a high-defini\
tion cable Service. 
The connection for high-definition can be done with the use of an HDMI o\
r Component Video cable.
• To view high-definition programming select the correct video input. *  
See page 10 
(AC cord 
connection)
Cable TV
VHF/UHF AntennaTV
UD @ Q  @ @Q Y @F O H@ ›@ J O EC 


UD@Q@@QY@FOH@›@JOEC


   


   


 
						

							
10
High-Definition
Standard-Definition
Note
  For more details on the external equipment’s connections, please refer to the operating manuals for the equipment.
Basic Connection (Continued)
 To use HDMI terminals
HDMI
AV OUT
e.g. Blu-ray Disc player
AV Equipment
 Connecting to HDMI terminals will enable you to enjoy high-definition di\
gital images and high-quality sound.  The HDMI connection is required for a 1080p signal.
 To use COMPONENT terminals
L
R Y
P
B
PR
AUDIO
OUT
COMPONENT
VIDEO OUT
white red
green
bluered
white
red green blue red
whitered
green
bluered
e.g. Blu-ray Disc 
player
AV Equipment
 To use COMPOSITE terminals
L
RCOMPOSITE
OUT
yellow
white
red yellow
white red
yellow
white
red or
e.g. DVD Recorder AV Equipment
e.g. VCR
AV cable connections
U
D @ Q  @ @Q Y @F O H@ ›@ J O EC 


 UD@Q@@QY@FOH@›@JOEC