Home > Panasonic > Television > Panasonic 42”/50” Class 1080p Plasma HDTV TH-42PZ80Q Operating Instructions

Panasonic 42”/50” Class 1080p Plasma HDTV TH-42PZ80Q Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic 42”/50” Class 1080p Plasma HDTV TH-42PZ80Q Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							TQB2AA0798
    Operating Instructions
    42”/50” Class 1080p Plasma HDTV
    (41.6/49.9 inches measured diagonally)
    Model No.TH-42PZ80Q
    TH-50PZ80Q
    EnglishPlease read these instructions before operating your set and retain them\
     for future reference.
    The images shown in this manual are for illustrative purposes only.
    Quick Start Guide
    (See page 6-17)
    Customer’s Record
    The model number and serial number of this product can be found on its b\
    ack cover. You should note this serial 
    number in the space provided below and retain this book, plus your purch\
    ase receipt, as a permanent record of your 
    purchase to aid in identification in the event of theft or loss, and for\
     Warranty Service purposes.
    Model Number      Serial Number      
    Panasonic Consumer Electronics Company,
    Division of Panasonic Corporation of North America
    One Panasonic Way, Secaucus
    New Jersey 07094 U.S.A.
    ©  2008 Panasonic Corporation of North America. All Rights Reserved.
    Printed in U.S.A.
       For assistance (U.S.A./Puerto Rico), please call: 
     1-877-95-VIERA (958-4372)
    or visit us at www.panasonic.com/contactinfo 
    						
    							23
    Viewing
    Advanced
    FAQs, etc.
    Quick Start Guide
    This product incorporates copyright protection technology that is protec\
    ted by U.S. patents and other intellectual property rights. 
    Use of this copyright protection technology must be authorized by Macrov\
    ision Corporation, and is intended for home and other 
    limited viewing uses only unless otherwise authorized by Macrovision. Re\
    verse engineering or disassembly is prohibited.CableCARDTM is a trademark of 
    Cable Television Laboratories, Inc.
    tru2way™ is a trademark of Cable Television  Laboratories, Inc.SDHC Logo is a trademark.
    Java and all Java-based trademarks 
    and logos are trademarks or registered 
    trademarks of Sun Microsystems, Inc. in the  United States and other countries.
    HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
    Manufactured under license from Dolby Laboratories. DOLBY and the double-D symbol are trademarks of Dolby Laboratories.
    VIERA Link™ is a trademark of Panasonic  Corporation.
    HDAVI Control™
    HDAVI Control™ is a trademark of Panasonic  Corporation.EZ Sync™
    EZ Sync™ is a trademark of Panasonic Corporation.
     Watching TV ··················\
    ··················\
    ··········· 18
      Viewing from SD Card ··················\
    ············· 20
      Watching Videos and DVDs ··················\
    ····· 22
      How to Use Menu Functions 
    (picture, sound quality, etc.) ··················\
    ····· 24
     VIERA LinkTM “HDAVI ControlTM” ················ 28
     Lock ··················\
    ··················\
    ··················\
    ····· 32
      Editing and Setting Channels ···········\
    ········· 34
     Closed Caption ··················\
    ··················\
    ······ 36
      Input Labels/Monitor Out ············\
    ··············· 37
     Using Timer ··················\
    ··················\
    ············ 38
      Programming the Remote to Operate Peripheral Equipment ··················\
    ·············· 39
     Recommended AV Connections ················ 40
      Remote control operation/codelist ············· 42
      Ratings List for Lock ··················\
    ················ 45
     Technical Information ··················\
    ··············· 46
      Care and Cleaning ··················\
    ··················\
    · 50
     Specifications ··················\
    ··················\
    ········· 51
     FAQ ··················\
    ··················\
    ··················\
    ······ 52
     Limited Warranty (for U.S.A. and Puerto Rico only) ·········\
    ····· 54
      Customer Services Directory (for U.S.A. and Puerto Rico) ··················\
    ···· 55
    Enjoy your TV!
    Basic Features
    Advanced Features
    FAQs, etc.
     Safety Precautions ··················\
    ··················\
    ··· 4
     Notes ··················\
    ··················\
    ··················\
    ······ 5
    Please read before using the unit
    Turn your own living room into a movie theater!
    Experience an amazing level of multimedia excitement
     Accessories/Optional Accessory  ····· 6
     Basic  Connection ··················\
    ··········· 9
     Identifying  Controls ··················\
    ······ 13
     Enjoy  tru2wayTM TV  ··················\
    ······ 14
     First Time  Setup  ··················\
    ·········· 16
    Quick Start Guide
    Enjoy rich multimedia
    SD memory card Camcorder
    Amplifier
    Home theater 
    system VCR
    DVD recorder/
    Blu-ray Disc recorder DVD player/
    Blu-ray Disc player
    Contents
    This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable 
    antenna, after the end of full-power analog TV broadcasting in the United States (as required by law) on February \
    17, 
    2009.  Some older television receivers, if they rely on a TV antenna, will need a TV Converter to receive over the air digital 
    programming, but should continue to work as before for other purposes (\
    e.g., for watching low-power TV stations still 
    broadcasting in analog, watching pre-recorded movies, or playing video g\
    ames). When a Converter is used with an older 
    television receiver, a signal splitter might be necessary to continue to receive low-power \
    analog broadcasts via an antenna. 
    For more information, please see www.DTV.gov. For information on the TV Converter program, and on government 
    coupons that may be used toward the purchase of one, see www.dtv2009.gov, or call the NTIA at 1-888-DTV-2009. Please 
    check with your cable or satellite service provider if you have question\
    s about your cable or satellite set-top box.  
    						
    							23
    Viewing
    Advanced
    FAQs, etc.
    Quick Start Guide
    This product incorporates copyright protection technology that is protec\
    ted by U.S. patents and other intellectual property rights. 
    Use of this copyright protection technology must be authorized by Macrov\
    ision Corporation, and is intended for home and other 
    limited viewing uses only unless otherwise authorized by Macrovision. Re\
    verse engineering or disassembly is prohibited.CableCARDTM is a trademark of 
    Cable Television Laboratories, Inc.
    tru2way™ is a trademark of Cable Television  Laboratories, Inc.SDHC Logo is a trademark.
    Java and all Java-based trademarks 
    and logos are trademarks or registered 
    trademarks of Sun Microsystems, Inc. in the  United States and other countries.
    HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
    Manufactured under license from Dolby Laboratories. DOLBY and the double-D symbol are trademarks of Dolby Laboratories.
    VIERA Link™ is a trademark of Panasonic  Corporation.
    HDAVI Control™
    HDAVI Control™ is a trademark of Panasonic  Corporation.EZ Sync™
    EZ Sync™ is a trademark of Panasonic Corporation.
     Watching TV ··················\
    ··················\
    ··········· 18
      Viewing from SD Card ··················\
    ············· 20
      Watching Videos and DVDs ··················\
    ····· 22
      How to Use Menu Functions 
    (picture, sound quality, etc.) ··················\
    ····· 24
     VIERA LinkTM “HDAVI ControlTM” ················ 28
     Lock ··················\
    ··················\
    ··················\
    ····· 32
      Editing and Setting Channels ···········\
    ········· 34
     Closed Caption ··················\
    ··················\
    ······ 36
      Input Labels/Monitor Out ············\
    ··············· 37
     Using Timer ··················\
    ··················\
    ············ 38
      Programming the Remote to Operate Peripheral Equipment ··················\
    ·············· 39
     Recommended AV Connections ················ 40
      Remote control operation/codelist ············· 42
      Ratings List for Lock ··················\
    ················ 45
     Technical Information ··················\
    ··············· 46
      Care and Cleaning ··················\
    ··················\
    · 50
     Specifications ··················\
    ··················\
    ········· 51
     FAQ ··················\
    ··················\
    ··················\
    ······ 52
     Limited Warranty (for U.S.A. and Puerto Rico only) ·········\
    ····· 54
      Customer Services Directory (for U.S.A. and Puerto Rico) ··················\
    ···· 55
    Enjoy your TV!
    Basic Features
    Advanced Features
    FAQs, etc.
     Safety Precautions ··················\
    ··················\
    ··· 4
     Notes ··················\
    ··················\
    ··················\
    ······ 5
    Please read before using the unit
    Turn your own living room into a movie theater!
    Experience an amazing level of multimedia excitement
     Accessories/Optional Accessory  ····· 6
     Basic  Connection ··················\
    ··········· 9
     Identifying  Controls ··················\
    ······ 13
     Enjoy  tru2wayTM TV  ··················\
    ······ 14
     First Time  Setup  ··················\
    ·········· 16
    Quick Start Guide
    Enjoy rich multimedia
    SD memory card Camcorder
    Amplifier
    Home theater 
    system VCR
    DVD recorder/
    Blu-ray Disc recorder DVD player/
    Blu-ray Disc player
    Contents
    This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable 
    antenna, after the end of full-power analog TV broadcasting in the United States (as required by law) on February \
    17, 
    2009.  Some older television receivers, if they rely on a TV antenna, will need a TV Converter to receive over the air digital 
    programming, but should continue to work as before for other purposes (\
    e.g., for watching low-power TV stations still 
    broadcasting in analog, watching pre-recorded movies, or playing video g\
    ames). When a Converter is used with an older 
    television receiver, a signal splitter might be necessary to continue to receive low-power \
    analog broadcasts via an antenna. 
    For more information, please see www.DTV.gov. For information on the TV Converter program, and on government 
    coupons that may be used toward the purchase of one, see www.dtv2009.gov, or call the NTIA at 1-888-DTV-2009. Please 
    check with your cable or satellite service provider if you have question\
    s about your cable or satellite set-top box.  
    						
    							45
    Safety Precautions
    WARNING: To reduce the risk of fire or electric shock, do not expose this apparatu\
    s to rain or moisture.Do not place liquid containers (flower vase, cups, cosmetics, etc.) ab\
    ove the set
    (including on shelves above, etc.).
    Notes
    Small parts can present choking hazard if accidentally 
    swallowed.
    Keep small parts away from young children.
    discard unneeded small parts and other objects, including 
    packaging materials and plastic bags/sheets to prevent 
    them from being played with by young children, creating 
    the potential risk of suffocation.
     Set upDo not place the Plasma TV on sloped or unstable surfaces.  The Plasma TV may fall off or tip over.
    Do not place any objects on top of the Plasma TV.
      If water spills onto the Plasma TV or foreign objects get  inside it, a short-circuit may occur which could result in fire 
    or electric shock. If any foreign objects get inside the Plasma 
    TV, please consult an Authorized Service Center.
    This Plasma TV is for use only with the following optional 
    accessories. Use with any other type of optional accessories may 
    cause instability which could result in the possibility of injury.
    (All of the following accessories are manufactured by Panasonic 
    Corporation.)
      • Wall-hanging bracket (Vertical)   TY-WK42PV3U  TY-WK42PV4W
      • Wall-hanging bracket (Angled)  TY-WK42PR3U
                   TY-WK42PR4W
    Always be sure to ask a qualified technician to carry out set-up.  Two or more people are required to install and remove the  television. If two people are not present, the television may 
    be dropped, and personal injury may result.
    Transport only in upright position!  Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry.
     AC Power Supply CordThe Plasma TV is designed to operate on 120 V AC, 60 Hz. 
    Securely insert the power cord plug as far as it will go.
      If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall socket 
    plate is loose, they should not be used.
    The included power cord is for use with this unit only.
    Do not use any power cord other than that provided with this TV.  Doing so may cause fire or electric shocks.
    Do not handle the power cord plug with wet hands.
      Doing so may cause electric shocks.Do not do anything that might damage the power cord. When 
    disconnecting the power cord, hold the plug, not the cord.
     Do not make any modifications to, place heavy objects on, 
    place near hot objects, heat, bend, twist or forcefully pull the 
    power cord. Doing so may cause damage to the power cord 
    which can cause fire or electric shock. If damage to the cord is 
    suspected, have it repaired at an Authorized Service Center.
     If problems occur during useIf a problem occurs (such as no picture or no sound), or if 
    smoke or an abnormal odor is detected from the Plasma 
    TV, unplug the power cord immediately.
      Continued use of the TV under these conditions might cause  fire or permanent damage to the unit. Have the TV evaluated 
    at an Authorized Service Center. Servicing of the TV by any 
    unauthorized personnel is strongly discouraged due to its 
    high voltage dangerous nature.
    If water or foreign objects get inside the Plasma TV, if the 
    Plasma TV is dropped, or if the cabinet becomes damaged, 
    disconnect the power cord plug immediately.
      A short may occur, which could cause fire. Contact an  Authorized Service Center for any repairs that need to be 
    made.
    Do not cover the ventilation holes.
      Doing so may cause the Plasma TV to overheat, which can  cause fire or damage to the Plasma TV.
    Leave a space of 3 15/16” (10 cm) or more at the top, left 
    and right, and 2 3/4” (7 cm) or more at the rear.
    When using the pedestal, keep the space between the 
    bottom of the TV and the floor surface.
     When using the Plasma TVBe sure to disconnect all cables before moving the Plasma 
    TV.
      Moving the TV with its cables attached might damage the  cables which, in turn, can cause fire or electric shock.
    Disconnect the power plug from the wall outlet as a safety 
    precaution before carrying out any cleaning.
      Electric shocks can result if this is not done.
    Clean the power cord plug regularly to prevent it from 
    becoming dusty.
      Built-up dust on the power cord plug can increase humidity  which might damage the insulation and cause fire. Unplug the 
    cord from the wall outlet and clean it with a dry cloth.
    This Plasma TV radiates infrared rays; therefore, it may 
    affect other infrared communication equipment.
    Install your infrared sensor in a place away from direct or 
    reflected light from your Plasma TV.
    Do not climb up onto the television or use it as a step. 
    (Young children should be made particularly aware of this 
    caution.)
      If the unit falls over or becomes damaged through misuse,  injury may result.
    The TV will still consume some power as long as the power 
    cord is inserted into the wall outlet.
      WARNING
     
     CAUTIONImportant Safety Instructions
    1)    Read these instructions.
    2)     Keep these instructions.
    3)     Heed all warnings.
    4)     Follow all instructions.
    5)     Do not use this apparatus near water.
    6)     Clean only with dry cloth.
    7)      Do not block any ventilation openings. Install in 
    accordance with the manufacturer’s instructions.
    8)     Do not install near any heat sources such as radiators, 
    heat registers, stoves, or other apparatus (including 
    amplifiers) that produce heat.
    9)      Do not defeat the safety purpose of the polarized or 
    grounding-type plug. A polarized plug has two blades with 
    one wider than the other. A grounding type plug has two 
    blades and a third grounding prong. The wide blade or the 
    third prong are provided for your safety. If the provided 
    plug does not fit into your outlet, consult an electrician for 
    replacement of the obsolete outlet.
    10)    Protect the power cord from being walked on or pinched 
    particularly at plugs, convenience receptacles, and the 
    point where they exit from the apparatus. 11) 
      Only use attachments / accessories specified by the 
    manufacturer.
    12)    Use only with the cart, stand, tripod, 
    bracket, or table specified by the 
    manufacturer, or sold with the 
    apparatus. When a cart is used, 
    use caution when moving the cart / 
    apparatus combination to avoid injury 
    from tip-over.
    13)    Unplug this apparatus during lightning storms or when 
    unused for long periods of time.
    14)    Refer all servicing to qualified service personnel. Servicing 
    is required when the apparatus has been damaged in any 
    way, such as power-supply cord or plug is damaged, liquid 
    has been spilled or objects have fallen into the apparatus, 
    the apparatus has been exposed to rain or moisture, does 
    not operate normally, or has been dropped.
    15)    To prevent electric shock, ensure the grounding pin on the 
    AC cord power plug is securely connected.
    FCC STATEMENT
    This equipment has been tested and found to comply with the limits for a\
    n Other Class B digital device, pursuant to Part 15 of the 
    FCC Rules. These limits are designed to provide reasonable protection against harmf\
    ul interference in a residential installation. 
    This equipment generates, uses and can radiate radio frequency energy an\
    d, if not installed and used in accordance with the 
    instructions, may cause harmful interference to radio communications. Ho\
    wever, there is no guarantee that interference will not 
    occur in a particular installation. If this equipment does cause harmful\
     interference to radio or television reception, which can be 
    determined by turning the equipment off and on, the user is encouraged to try to correct the interference by o\
    ne or more of the 
    following measures:
      • Reorient or relocate the receiving antenna.
      • Increase the separation between the equipment and receiver.
      • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
      • Consult the Panasonic Service Center or an experienced radio/TV tec\
    hnician for help.
    FCC Caution:
    To assure continued compliance, follow the attached installation instruct\
    ions and use only shielded interface cables 
    when connecting to peripheral devices. Any changes or modifications not expressly approved by Panasonic Corp. o\
    f 
    North America could void the user’s authority to operate this device.
    Responsible Party: Panasonic Corporation of North AmericaOne Panasonic Way, Secaucus, NJ 07094
    Contact Source: Panasonic Consumer Electronics Company 1-877-95-VIERA (958-4372)
    email: [email protected]
    WARNING/CAUTION
     Do not display a still picture for a long timeThis causes the image to remain on the plasma screen
    (“Image retention”). This is not considered a malfunction and 
    is not covered by the warranty.4 : 312To prevent “Image retention”, 
    the screen saver is 
    automatically activated after 
    a few minutes if no signals 
    are sent or no operations are 
    performed. (p. 53)
    Typical still images■ Set up
    • Channel number and other logos
    • Image displayed in 4:3 mode
    • SD Card photo  y• Video game  y• Computer image
      Do not place the unit where it’s exposed to sunlight or other  bright light (including reflections).
      Use of some types of fluorescent lighting may reduce the remote control’s transmission range.
      
    CAUTION
    RISK OF ELECTRIC SHOCK DO NOT OPEN
      
    WARNING: To reduce the risk of electric shock, do not remove cover or back.
    No user-serviceable parts inside. Refer servicing to qualified service p\
    ersonnel.
    The lightning flash with 
    arrowhead within a triangle 
    is intended to tell the user 
    that parts inside the product 
    are a risk of electric shock 
    to persons.
    The exclamation point 
    within a triangle is 
    intended to tell the user 
    that important operating 
    and servicing instructions 
    are in the papers with the 
    appliance. 
    						
    							45
    Safety Precautions
    WARNING: To reduce the risk of fire or electric shock, do not expose this apparatu\
    s to rain or moisture.Do not place liquid containers (flower vase, cups, cosmetics, etc.) ab\
    ove the set
    (including on shelves above, etc.).
    Notes
    Small parts can present choking hazard if accidentally 
    swallowed.
    Keep small parts away from young children.
    discard unneeded small parts and other objects, including 
    packaging materials and plastic bags/sheets to prevent 
    them from being played with by young children, creating 
    the potential risk of suffocation.
     Set upDo not place the Plasma TV on sloped or unstable surfaces.  The Plasma TV may fall off or tip over.
    Do not place any objects on top of the Plasma TV.
      If water spills onto the Plasma TV or foreign objects get  inside it, a short-circuit may occur which could result in fire 
    or electric shock. If any foreign objects get inside the Plasma 
    TV, please consult an Authorized Service Center.
    This Plasma TV is for use only with the following optional 
    accessories. Use with any other type of optional accessories may 
    cause instability which could result in the possibility of injury.
    (All of the following accessories are manufactured by Panasonic 
    Corporation.)
      • Wall-hanging bracket (Vertical)   TY-WK42PV3U  TY-WK42PV4W
      • Wall-hanging bracket (Angled)  TY-WK42PR3U
                   TY-WK42PR4W
    Always be sure to ask a qualified technician to carry out set-up.  Two or more people are required to install and remove the  television. If two people are not present, the television may 
    be dropped, and personal injury may result.
    Transport only in upright position!  Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry.
     AC Power Supply CordThe Plasma TV is designed to operate on 120 V AC, 60 Hz. 
    Securely insert the power cord plug as far as it will go.
      If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall socket 
    plate is loose, they should not be used.
    The included power cord is for use with this unit only.
    Do not use any power cord other than that provided with this TV.  Doing so may cause fire or electric shocks.
    Do not handle the power cord plug with wet hands.
      Doing so may cause electric shocks.Do not do anything that might damage the power cord. When 
    disconnecting the power cord, hold the plug, not the cord.
     Do not make any modifications to, place heavy objects on, 
    place near hot objects, heat, bend, twist or forcefully pull the 
    power cord. Doing so may cause damage to the power cord 
    which can cause fire or electric shock. If damage to the cord is 
    suspected, have it repaired at an Authorized Service Center.
     If problems occur during useIf a problem occurs (such as no picture or no sound), or if 
    smoke or an abnormal odor is detected from the Plasma 
    TV, unplug the power cord immediately.
      Continued use of the TV under these conditions might cause  fire or permanent damage to the unit. Have the TV evaluated 
    at an Authorized Service Center. Servicing of the TV by any 
    unauthorized personnel is strongly discouraged due to its 
    high voltage dangerous nature.
    If water or foreign objects get inside the Plasma TV, if the 
    Plasma TV is dropped, or if the cabinet becomes damaged, 
    disconnect the power cord plug immediately.
      A short may occur, which could cause fire. Contact an  Authorized Service Center for any repairs that need to be 
    made.
    Do not cover the ventilation holes.
      Doing so may cause the Plasma TV to overheat, which can  cause fire or damage to the Plasma TV.
    Leave a space of 3 15/16” (10 cm) or more at the top, left 
    and right, and 2 3/4” (7 cm) or more at the rear.
    When using the pedestal, keep the space between the 
    bottom of the TV and the floor surface.
     When using the Plasma TVBe sure to disconnect all cables before moving the Plasma 
    TV.
      Moving the TV with its cables attached might damage the  cables which, in turn, can cause fire or electric shock.
    Disconnect the power plug from the wall outlet as a safety 
    precaution before carrying out any cleaning.
      Electric shocks can result if this is not done.
    Clean the power cord plug regularly to prevent it from 
    becoming dusty.
      Built-up dust on the power cord plug can increase humidity  which might damage the insulation and cause fire. Unplug the 
    cord from the wall outlet and clean it with a dry cloth.
    This Plasma TV radiates infrared rays; therefore, it may 
    affect other infrared communication equipment.
    Install your infrared sensor in a place away from direct or 
    reflected light from your Plasma TV.
    Do not climb up onto the television or use it as a step. 
    (Young children should be made particularly aware of this 
    caution.)
      If the unit falls over or becomes damaged through misuse,  injury may result.
    The TV will still consume some power as long as the power 
    cord is inserted into the wall outlet.
      WARNING
     
     CAUTIONImportant Safety Instructions
    1)    Read these instructions.
    2)     Keep these instructions.
    3)     Heed all warnings.
    4)     Follow all instructions.
    5)     Do not use this apparatus near water.
    6)     Clean only with dry cloth.
    7)      Do not block any ventilation openings. Install in 
    accordance with the manufacturer’s instructions.
    8)     Do not install near any heat sources such as radiators, 
    heat registers, stoves, or other apparatus (including 
    amplifiers) that produce heat.
    9)      Do not defeat the safety purpose of the polarized or 
    grounding-type plug. A polarized plug has two blades with 
    one wider than the other. A grounding type plug has two 
    blades and a third grounding prong. The wide blade or the 
    third prong are provided for your safety. If the provided 
    plug does not fit into your outlet, consult an electrician for 
    replacement of the obsolete outlet.
    10)    Protect the power cord from being walked on or pinched 
    particularly at plugs, convenience receptacles, and the 
    point where they exit from the apparatus. 11) 
      Only use attachments / accessories specified by the 
    manufacturer.
    12)    Use only with the cart, stand, tripod, 
    bracket, or table specified by the 
    manufacturer, or sold with the 
    apparatus. When a cart is used, 
    use caution when moving the cart / 
    apparatus combination to avoid injury 
    from tip-over.
    13)    Unplug this apparatus during lightning storms or when 
    unused for long periods of time.
    14)    Refer all servicing to qualified service personnel. Servicing 
    is required when the apparatus has been damaged in any 
    way, such as power-supply cord or plug is damaged, liquid 
    has been spilled or objects have fallen into the apparatus, 
    the apparatus has been exposed to rain or moisture, does 
    not operate normally, or has been dropped.
    15)    To prevent electric shock, ensure the grounding pin on the 
    AC cord power plug is securely connected.
    FCC STATEMENT
    This equipment has been tested and found to comply with the limits for a\
    n Other Class B digital device, pursuant to Part 15 of the 
    FCC Rules. These limits are designed to provide reasonable protection against harmf\
    ul interference in a residential installation. 
    This equipment generates, uses and can radiate radio frequency energy an\
    d, if not installed and used in accordance with the 
    instructions, may cause harmful interference to radio communications. Ho\
    wever, there is no guarantee that interference will not 
    occur in a particular installation. If this equipment does cause harmful\
     interference to radio or television reception, which can be 
    determined by turning the equipment off and on, the user is encouraged to try to correct the interference by o\
    ne or more of the 
    following measures:
      • Reorient or relocate the receiving antenna.
      • Increase the separation between the equipment and receiver.
      • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
      • Consult the Panasonic Service Center or an experienced radio/TV tec\
    hnician for help.
    FCC Caution:
    To assure continued compliance, follow the attached installation instruct\
    ions and use only shielded interface cables 
    when connecting to peripheral devices. Any changes or modifications not expressly approved by Panasonic Corp. o\
    f 
    North America could void the user’s authority to operate this device.
    Responsible Party: Panasonic Corporation of North AmericaOne Panasonic Way, Secaucus, NJ 07094
    Contact Source: Panasonic Consumer Electronics Company 1-877-95-VIERA (958-4372)
    email: [email protected]
    WARNING/CAUTION
     Do not display a still picture for a long timeThis causes the image to remain on the plasma screen
    (“Image retention”). This is not considered a malfunction and 
    is not covered by the warranty.4 : 312To prevent “Image retention”, 
    the screen saver is 
    automatically activated after 
    a few minutes if no signals 
    are sent or no operations are 
    performed. (p. 53)
    Typical still images■ Set up
    • Channel number and other logos
    • Image displayed in 4:3 mode
    • SD Card photo  y• Video game  y• Computer image
      Do not place the unit where it’s exposed to sunlight or other  bright light (including reflections).
      Use of some types of fluorescent lighting may reduce the remote control’s transmission range.
      
    CAUTION
    RISK OF ELECTRIC SHOCK DO NOT OPEN
      
    WARNING: To reduce the risk of electric shock, do not remove cover or back.
    No user-serviceable parts inside. Refer servicing to qualified service p\
    ersonnel.
    The lightning flash with 
    arrowhead within a triangle 
    is intended to tell the user 
    that parts inside the product 
    are a risk of electric shock 
    to persons.
    The exclamation point 
    within a triangle is 
    intended to tell the user 
    that important operating 
    and servicing instructions 
    are in the papers with the 
    appliance. 
    						
    							67
    Quick Start Guide
     Accessories/Optional Accessory
    Accessories
    Assembly screws
    (4 of each)
     
    A
    M5 x 18 (Silver)
    B
    M5 x 25 (Black)
    Poles (2)
    LR
    L or R is printed at the 
    bottom of the poles.
     Base (1)
    Accessories/Optional Accessory
    Accessories
    Check you have all the items shown.
    Remote Control
    Transmitter
     N2QAYB000294
    Cable clamper
    Batteries for the
    Remote Control
    Transmitter (2)
     AA Battery
    AC cord Pedestal
     TBLX0036
    (TH-42PZ80Q)
     TBLX0037(TH-50PZ80Q)
    Product Registration Card (U.S.A.)
    Customer Care Plan Card (U.S.A.)
    Operating Instructions
    Quick Setup Guide 
    (For viewing HD programming)
    Installing the remote’s batteries
    Open
    Hook
     
     
    Note the correct polarity
    (+ or -). Close
    Caution
     Incorrect installation may cause 
    battery leakage and corrosion, 
    resulting in damage to the remote 
    control.
     •  Do not mix old and new batteries.
     •  Do not mix different battery types (such 
    as alkaline and manganese batteries).
     •  Do not use rechargeable (Ni-Cd) 
    batteries.
     Do not burn or break batteries.
     Make a note of the remote control codes before changing batteries in 
    case the codes are reset. (p. 39)
    Optional Accessory
    Note
     In order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or 
    a licensed contractor to secure the wall-hanging 
    brackets.
     Carefully read the instructions accompanying the plasma TV stand or pedestal, and be absolutely 
    sure to take steps to prevent the TV from tipping 
    over.
     Handle the TV carefully during installation since subjecting it to impact or other forces may cause 
    its panel to crack.Wall-hanging bracket
    (vertical)
     TY-WK42PV3U
     TY-WK42PV4W (angle)
     TY-WK42PR3U
     TY-WK42PR4W
    Attaching the pedestal to TV
    ■Assembling the pedestal
      Fix securely with assembly screws A. (Total 4 screws)
     
     Tighten screws firmly.
     
    A
    L
    R
    Pole Front
    Pole
    Base
    ■Set-up
      Carry out work on a horizontal and level surface.
     
     Tighten screws firmly.
     
    B
     Fix securely with assembly screws B. 
    (Total 4 screws)
    Rear side
    Arrow 
    mark
    Pole Hole for pedestal 
    installation 
    Pole
     Base 
    Bottom view
    Warning
    Do not disassemble or modify the pedestal.
     Otherwise the TV may fall over and become damaged, and personal injury may result.
    Caution
    Do not use any other TV and displays.
     Otherwise the TV may fall over and become damaged, and personal injury may result.
    Do not use the pedestal if it becomes warped or physically damaged.
     If you use the pedestal when it is physically damaged, personal injury m\
    ay result. Contact your nearest Panasonic  Dealer immediately.
    During set-up, make sure that all screws are securely tightened.
     If sufficient care is not taken to ensure screws are properly tightened during\
     assembly, the pedestal will not be  strong enough to support the TV, and it might fall over and become damaged, and personal injury may res\
    ult.
    Accessories
    How to assemble (p.7) 
    						
    							67
    Quick Start Guide
     Accessories/Optional Accessory
    Accessories
    Assembly screws
    (4 of each)
     
    A
    M5 x 18 (Silver)
    B
    M5 x 25 (Black)
    Poles (2)
    LR
    L or R is printed at the 
    bottom of the poles.
     Base (1)
    Accessories/Optional Accessory
    Accessories
    Check you have all the items shown.
    Remote Control
    Transmitter
     N2QAYB000294
    Cable clamper
    Batteries for the
    Remote Control
    Transmitter (2)
     AA Battery
    AC cord Pedestal
     TBLX0036
    (TH-42PZ80Q)
     TBLX0037(TH-50PZ80Q)
    Product Registration Card (U.S.A.)
    Customer Care Plan Card (U.S.A.)
    Operating Instructions
    Quick Setup Guide 
    (For viewing HD programming)
    Installing the remote’s batteries
    Open
    Hook
     
     
    Note the correct polarity
    (+ or -). Close
    Caution
     Incorrect installation may cause 
    battery leakage and corrosion, 
    resulting in damage to the remote 
    control.
     •  Do not mix old and new batteries.
     •  Do not mix different battery types (such 
    as alkaline and manganese batteries).
     •  Do not use rechargeable (Ni-Cd) 
    batteries.
     Do not burn or break batteries.
     Make a note of the remote control codes before changing batteries in 
    case the codes are reset. (p. 39)
    Optional Accessory
    Note
     In order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or 
    a licensed contractor to secure the wall-hanging 
    brackets.
     Carefully read the instructions accompanying the plasma TV stand or pedestal, and be absolutely 
    sure to take steps to prevent the TV from tipping 
    over.
     Handle the TV carefully during installation since subjecting it to impact or other forces may cause 
    its panel to crack.Wall-hanging bracket
    (vertical)
     TY-WK42PV3U
     TY-WK42PV4W (angle)
     TY-WK42PR3U
     TY-WK42PR4W
    Attaching the pedestal to TV
    ■Assembling the pedestal
      Fix securely with assembly screws A. (Total 4 screws)
     
     Tighten screws firmly.
     
    A
    L
    R
    Pole Front
    Pole
    Base
    ■Set-up
      Carry out work on a horizontal and level surface.
     
     Tighten screws firmly.
     
    B
     Fix securely with assembly screws B. 
    (Total 4 screws)
    Rear side
    Arrow 
    mark
    Pole Hole for pedestal 
    installation 
    Pole
     Base 
    Bottom view
    Warning
    Do not disassemble or modify the pedestal.
     Otherwise the TV may fall over and become damaged, and personal injury may result.
    Caution
    Do not use any other TV and displays.
     Otherwise the TV may fall over and become damaged, and personal injury may result.
    Do not use the pedestal if it becomes warped or physically damaged.
     If you use the pedestal when it is physically damaged, personal injury m\
    ay result. Contact your nearest Panasonic  Dealer immediately.
    During set-up, make sure that all screws are securely tightened.
     If sufficient care is not taken to ensure screws are properly tightened during\
     assembly, the pedestal will not be  strong enough to support the TV, and it might fall over and become damaged, and personal injury may res\
    ult.
    Accessories
    How to assemble (p.7) 
    						
    							89
    Quick Start Guide
     Basic Connection (Antenna + TV) Accessories/Optional Accessory
    To connect the antenna terminal
    Accessories/Optional Accessory (Continued)
    Antenna terminal Pin terminals HDMI terminal
    greenbluered
    green
     Firmly tighten by hand. Match colors of plugs and terminals.
     Insert firmly.
     Insert firmly.
    AC Cord Connection
    To attach
    hole
    Insert
    To bundle
    To remove
    To loosen Press both 
    tabs and pull 
    the clamper.
     Snaps
    Set
    hooks knobKeep pushing 
    the knob
    Cable clamper
     Do not bundle the RF cable and AC cord 
    together (could cause distorted image).
     Fasten the cables with the Cable clamper as necessary.
     When using the optional accessories, follow their assembly manuals to fix cables.
    Reference of connection
    Cable Binding Instructions
    Basic Connection
    Note
      Not all cables and external equipment shown in this book are supplied wi\
    th the TV.
     For the details of the external equipment’s connections, please refer to the operating manuals for the equipment.
     When disconnecting the power cord, be absolutely sure to disconnect the \
    power cord plug from the wall outlet first.
     For additional assistance, visit us at:   www.panasonic.com
    Example 1Connecting Antenna (To watch TV)
    Cable TV VHF/UHF Antenna
    TV
    VHF/UHF Antenna
    •  NTSC (National Television System Committee):
    Conventional broadcasting
    • ATSC (Advanced Television Systems Committee):
       Digital TV Standards include digital high-definition television 
    (HDTV), standard-definition television (SDTV), data broadcasting, 
    multi-channel surround-sound audio and interactive television.
    •  You need to subscribe to a cable TV service to enjoy viewing their programming.
    •  You can enjoy high-definition programming by subscribing to a high-defini\
    tion cable service. 
    The connection for high-definition can be done with the use of HDMI or C\
    omponent Video cable. (p. 12)
    •  To view high-definition programming, select the correct video input. (p.\
     22) AC Cord
    (Connect after all the 
    other connections have 
    been made.)
    Back of the TV
    Cable TV
    AC 120 V
    60 HzVHF/UHF Antenna
    or
    *  See page 8 (AC cord 
    connection)
    To attach To remove
    Insert it firmly until the 
    tabs on both sides click 
    into place. Press both tabs and 
    pull the AC cord plug 
    away from the TV. 
    						
    							89
    Quick Start Guide
     Basic Connection (Antenna + TV) Accessories/Optional Accessory
    To connect the antenna terminal
    Accessories/Optional Accessory (Continued)
    Antenna terminal Pin terminals HDMI terminal
    greenbluered
    green
     Firmly tighten by hand. Match colors of plugs and terminals.
     Insert firmly.
     Insert firmly.
    AC Cord Connection
    To attach
    hole
    Insert
    To bundle
    To remove
    To loosen Press both 
    tabs and pull 
    the clamper.
     Snaps
    Set
    hooks knobKeep pushing 
    the knob
    Cable clamper
     Do not bundle the RF cable and AC cord 
    together (could cause distorted image).
     Fasten the cables with the Cable clamper as necessary.
     When using the optional accessories, follow their assembly manuals to fix cables.
    Reference of connection
    Cable Binding Instructions
    Basic Connection
    Note
      Not all cables and external equipment shown in this book are supplied wi\
    th the TV.
     For the details of the external equipment’s connections, please refer to the operating manuals for the equipment.
     When disconnecting the power cord, be absolutely sure to disconnect the \
    power cord plug from the wall outlet first.
     For additional assistance, visit us at:   www.panasonic.com
    Example 1Connecting Antenna (To watch TV)
    Cable TV VHF/UHF Antenna
    TV
    VHF/UHF Antenna
    •  NTSC (National Television System Committee):
    Conventional broadcasting
    • ATSC (Advanced Television Systems Committee):
       Digital TV Standards include digital high-definition television 
    (HDTV), standard-definition television (SDTV), data broadcasting, 
    multi-channel surround-sound audio and interactive television.
    •  You need to subscribe to a cable TV service to enjoy viewing their programming.
    •  You can enjoy high-definition programming by subscribing to a high-defini\
    tion cable service. 
    The connection for high-definition can be done with the use of HDMI or C\
    omponent Video cable. (p. 12)
    •  To view high-definition programming, select the correct video input. (p.\
     22) AC Cord
    (Connect after all the 
    other connections have 
    been made.)
    Back of the TV
    Cable TV
    AC 120 V
    60 HzVHF/UHF Antenna
    or
    *  See page 8 (AC cord 
    connection)
    To attach To remove
    Insert it firmly until the 
    tabs on both sides click 
    into place. Press both tabs and 
    pull the AC cord plug 
    away from the TV. 
    						
    							1011
    Quick Start Guide
     Basic Connection  (TV + DVD Recorder or VCR + Satellite Receiver)  (TV + DVD Recorder or VCR)
    To connect the antenna terminal and DVD recorder or VCRTo connect the antenna terminal and Satellite Receiver and DVD recorder o\
    r VCR
    ANT OUTANT IN
    A
    B
    D
    C
    ANT INANT OUTANT IN
    A
    B
    D
    C
    Basic Connection (Continued)
    Example 2Connecting DVD recorder (VCR) (To record/playback)
    DVD Recorder
    If this source has higher resolution through interlace 
    or progressive signal, connection can be done with 
    the use of Component Video or HDMI cable. (p. 12)
    VCR
    Connection can be done with the use of an RF 
    cable and Composite Video/S Video cable. (p. 12)VHF/UHF AntennaTV AV Equipment
    (e.g. DVD Recorder 
    or VCR)
    Back of the TV AC Cord
    AC 120 V
    60 Hz
    VHF/UHF Antenna
    AV Equipment
    (e.g. DVD Recorder or VCR) (with TV tuner) Connecting TV and AV equipment
    Please refer to 
    A - D on p. 12.
    Example 3Connecting DVD recorder (VCR) and satellite receiver
    DVD Recorder
    or 
    VCR Satellite 
    Receiver
    TVVHF/UHF Antenna
    You can enjoy high-definition 
    programming by subscribing to 
    high-definition satellite service. 
    Connection can be done with the 
    use of HDMI or Component Video 
    cable. (p. 12)
    Note
      
    For details of external equipment connections, please refer to the opera\
    ting manuals for the equipment. Satellite Receiver DVD Recorder or VCR
    (with TV tuner)
    VHF/UHF Antenna
    Back of the TV AC Cord
    AC 120 V
    60 Hz
    Connecting TV and AV equipment
    Please refer to
    A - D on p. 12.
    *  See page 8 
    (AC cord connection) *  
    See page 8 
    (AC cord connection) 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic 42”/50” Class 1080p Plasma HDTV TH-42PZ80Q Operating Instructions