Panasonic 42"50" Class 1080p Plasma Hdtv Tc P42gt25 Operating Instructions

							51
Advanced
 Editing and Setting Channels
Automatically searches and adds available channels to the memory.
 Select “ANT in”    Select “Cable” or “Antenna” 
Or select “Not used” (p. 15).
 Select “Auto program”
MenuCableANT/Cable setupANT in
Auto program
Manual program
Signal meter next
 select
 Select a scanning mode 
(p. 15)MenuAuto programAll channels
Analog only
Digital only OK
 select
Settings are made automatically  After the scanning is completed, select “Apply”.
(see below ). All previously saved channels are erased.
Use this procedure when changing the channel setup or 
changing the channel display.
Also, use this to add or skip channels from the channel list 
manually. 
You can select a channel tuning mode (Digital only/Analog 
only) in “Channel surf mode”(p. 37)
  Edit Caption
---
80-101
Edit CH caption
Caption ChannelOK
RETURN
Delete
ABC  → abc
RGBY
@
D A
Select
 change
 set
or
  Caption  Select or edit the station identifier. 
(maximum 7 characters available)  Favorite
Set favorite 1/326-112
 select
 set
  Set favorite    Select the number
 Add
Press OK to select “Yes (add)” or “No (skip)”  
 Move the cursor to a channel numberManual programEdit Cancel
Apply
Caption Favorite Add
2 ...
...
Ye s
3 ...
...
Ye s
Channel select
 press OK to tune 
to the channel
 Select “Apply” programCancel
Apply
Caption Favorite Add ...
...
Ye s
el select
 OK
 Select “Edit”
Manual programEdit
Cancel
Apply
Caption Favorite Add
2 ...
...
Ye s
3 ...
...
Ye s
4 ...
...
Ye s
5 ...
...
Ye s
Channel
 
 select
 next
 Select the item to edit
RGBY
Select
RETURNOK
Manual programEdit
Cancel
Apply
Caption Favorite Add
2 ...
...
Ye s
3 ...
...
Ye s
4 ...
...
Ye s
5 ...
...
Ye s
6 ...
...
Ye s
7 ...
...
Ye s
8 ...
...
Ye s
9 ...
...
Ye s
Channel
Prev.page Next page
Caption
Favorite
Add
Proceed to 
next page
Go back to the previous 
page
 select the item 
to edit (Caption/
Favorite/Add)
 next
• Caption:
  Changes the station identifier
• Favorite:
  Registers channels to the  Favorite List
• Add:
  Adds or skips channels
To cancel the EditManual programEdit Cancel
Apply
Caption Favorite Add
2 ...
...
Ye s
3 ...
...
Ye s
4 ...
...
Ye s
5 ...
...
Ye s
Channel
 select
 next
Changes will be lost. Continue?Ye s
No OK  (returns to “ANT/
Cable setup”)
 select  “Yes”
Check the signal strength if interference is found or freezing occurs on\
 a digital image.Menu
Selects which channel to be tested for signal
strength.
--Signal  meterChannel
Signal  strength
Current 86%
Peak level 98%
Tune manually
Signal intensity 
 change 
channel
 OK
or
 If the signal is weak, check the antenna.
If no problem is found, consult your local dealer.
Note
 Not available if “Cable” is selected in “ANT in” (see above). Available only for digital antenna channels.
 If “Lock” (p. 48) is activated and “ANT/Cable setup” is se\
lected, “Enter password.” will be displayed.
UD@Q@@(5@FOH@JOEC



UD@Q@@(5@FOH@JOEC


 






 
						

							52
Closed Caption
 Press to exit from a menu screen
Display the menu
Select “Closed caption”
Menu
Primary CC1On
Closed caption
Digital Mode
Analog
Digital setting Reset to defaults
Display broadcast TV’s Closed Caption (CC)
text when available.
 next
 select
Closed caption
Display
Closed 
caption
The television includes a built-in decoder that is capable of providing \
a text display of the audio. 
The program being viewed must be transmitting the Closed caption (CC) \
information. (p. 57)
 Select the item and setMenu
Primary
CC1On
Closed caption
Digital Mode
Analog
Digital setting Reset to defaults
Selects style and language for displaying
digital Closed Caption.
 select
 set
Mode
On:  To display Closed captions.CC on mute:  
To display Closed captions 
when the audio is muted. 
(When not using, select “Off”).
Analog (Choose the Closed caption service 
of Analog  broadcasting.)
CC1-4:  Information related to pictures  (Appears at the bottom of the screen)
T1-4: Textual information (Appears over the entire screen)
Digital (The Digital Closed caption menu lets 
you configure the way you choose to 
view the digital captioning.)
Select the setting.
  “Primary”, “Second.”, “Service 3”, “Service 4”, \
 “Service 5”, “Service 6”
 The settings in “Analog” or “Digital”
depend on the broadcaster.
 To make more in-depth display settings in digital programs
 
 Select “Digital setting” and press OK
 
 Select the item and setMenuSmall
Default
None
SolidBlackSolidBlack
Black
Digital settingSize
Foreground Font
Style
Fore. opacity
Background
Back. opacity
Outline
Selects the text size.
 select
 set
Size Text size
Font Text font
Style Text style (Raised, Depressed, etc.)
ForegroundColor of text
Fore. opacityOpacity of text
BackgroundColor of text box
Back. opacityOpacity of text box
Outline Outline color of text (Identify the 
setting options on the screen.)
 To reset the settings
 
 Select “Reset to defaults”. Confirmation screen is displayed.
 
 Select “Yes” and press OK.
UD@Q@@(5@FOH@JOEC


 UD@Q@@(5@FOH@JOEC


 






 
						

							53
Advanced
 Input Labels
 Closed Caption
Input Labels
Input labels
Display
labels of
connected 
devices
Devices connected to external input terminals can be labeled for easier \
identification during the 
input selection. (In selecting the input mode from p. 32 )
 Select the terminal and label of the external equipment
MenuInput labels
Component 1
Component 2
Video 1
Video 2
PC HDMI 2
HDMI 3 HDMI 1Select or enter the name of the device
connected to the HDMI 1 terminal.
SelectOK
RETURNABC Delete
abcRGBY
[email protected] - ,LAST
PCG A A
Select if a computer is connected to the
TV’s PC input.
 select
 setor
Follow the instructions on screen to 
complete the following operations.
Video 1
VCR
Label Terminal
[example] Terminals:   HDMI 1-3/Component 1-2/Video 1-2/PC Label:   [BLANK] Not used/Blu-ray/DVD/DVD REC/HOME THTR/
GAME/COMPUTER/VCR/CABLE/SATELLITE/DVR/CAMERA/
MONITOR/AUX/RECEIVER/MEDIA CTR/MEDIA EXT/OTHER
 For the PC terminal, only “Not used” is available. If “Not used” is selected, the INPUT button press will skip its input. Each selected label will be displayed on the “Input select” screen\
. 
(p. 32)
 Press to exit from a 
menu screen 
Display the menu
Select “Setup”Menu
Adjusts Surf mode, Language, Clock,
Channels, Inputs, and other settings.
Setup 1/2
Clock
ANT/Cable setup
Input labels
Anti image retention
Network settings Language
All
Channel surf mode 3D settings
 next
 select
Select “Input labels”
Menu
Customize TV inputs with the names of your
connected devices. For easier input selections.
Setup
1/2
Clock
ANT/Cable setup
Input labels
Anti image retention
Network settings Language
All
Channel surf mode 3D settings
 next
 select
UD@Q@@(5@FOH@JOEC


 UD@Q@@(5@FOH@JOEC










 
						

							54
Using Timer
The TV can automatically turn On/Off at the designated date and time. The Clock must be set before On time/Off time settings. (p. 17) The “Sleep” timer and “On / Off timer” will not work if the “Auto power on” (p. 37) is set.\
 Press to exit from a menu screen
 Press to return to 
the previous screen
Note
 The TV automatically 
turns Off after 90 
minutes when turned 
On by the Timer. 
This operation will be 
cancelled if the Off 
time is selected or if a 
key is pressed.
Display the menu
Select “Timer”MenuTimerSleep
Timer 1
Timer 2
Timer 3
Timer 4
Timer 5
Set the TV to turn on or off automatically at
the designated date and time.
 next
 select
Select the Timer to set
Menu
Turns the TV off after selected time.
TimerSleep
Timer 1
Timer 2
Timer 3
Timer 4
Timer 5 select
 next
Turns Off automaticallySleep Turns On/Off automatically
(5 timers can be set)
Timer 1
Timer 5
~
Set the Timer
 To set “Sleep” (Off Timer)  Set to shut the unit off after a pre-selected amount of time.Menu0SleepSleep (minutes)
set
 0/15/30/60/90 (minutes)
 To set “Timer 1-5” (On/Off Timer)  Select the item and setMenu
Sets the time when the TV turns on. The TV
will turn off after 90 minutes or as specified.
OffTV--4/18 [SUN]--:----:--
Timer 1Timer set
Inputs
Channel
Day
On time
Off time select
 set
orSets the time when the TV turns on. The TV
will turn off after 90 minutes or as specified.
4/18 [SUN]
--:--
DayOn time
Off time12
0LASTAM/PM
Clear9OK
RETURN
Select
SUN/MON/TUE/WED/THU/FRI/SAT
(displays the nearest future date) 
MON-FRI/SAT-SUN/DAILY/Every SUN/Every MON/
Every TUE/Every WED/Every THU/Every FRI/ Every SAT
Select the channelChannel
Select the day
Day
The time to turn On
On time The time to turn Off
Off time Select the inputs
Inputs
Timer setting (Off/On)
Timer set
UD@Q@@(5@FOH@JOEC


 UD@Q@@(5@FOH@JOEC










 
						

							55
Advanced
 Recommended AV Connections
 Using Timer
Recommended AV Connections
These diagrams show our recommendations of how to connect the TV unit to your various equipment.
For other connections, consult the instructions for each piece of equipm\
ent and its specifications. 
For additional assistance, please visit our website at:   www.panasonic.comwww.panasonic.ca
 *  Please see p. 36 for the setup when using an external analog audio cable\
 with an HDMI to DVI cable.
AC 120 V 60 Hz
Back of the TV
Cable BoxCable TV
or
■ To watch DVDs Optical 
digital 
audio 
cable
■ DVD Recorder / 
VCR
■ To listen to the TV 
through speakers or
■ To watch camcorder 
images
Camcorder
VCR 
DVD Player
 (For HDMI connection,
HDMI compatible 
equipment only. For 
connection using an 
HDMI-DVI Conversion 
cable, see HDMI 1 or 
HDMI 2 connection on 
this page.) Audio 
cableor
■ To watch digital video 
image
DVD Player/
Blu-ray Disk player/
Set Top Box
DVD Player or Set 
Top Box
(HDMI compatible 
machines only)
Connect with A or B
A 
HDMI cable
B HDMI-DVI 
Conversion 
cable + 
Audio cable*
or
Amplifier
OPTICAL 
IN
or
Front of the TV
AC Cord
(Connect after all the 
other connections are 
complete.)
Conversion 
adapter 
(if necessary) Computer
RGB 
PC cable
AUDIO 
cable 
■ PC
LAN connection (p. 29)
■ USB connectionsWireless LAN adapter (p. 29)USB flash memory (p. 24)
USB keyboard (p. 28)
UD@Q@@(5@FOH@JOEC


 UD@Q@@(5@FOH@JOEC










 
						

							56
Ratings List for Lock
“V-chip” technology enables you to lock channels or shows according to \
standard ratings set by the 
entertainment industry. (p. 49)
 U.S. MOVIE RATINGS (MPAA)
NRNO RATING (NOT RATED) AND NA (NOT APPLICABLE) PROGRAMS. Movie which has not been rated or 
where rating does not apply.
G GENERAL AUDIENCES. All  ages  admitted.
PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
PG-13 PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13. R RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NC-17 NO ONE 17 AND UNDER ADMITTED. X ADULTS ONLY.
 U.S. TV PROGRAMS RATINGS (U. S. TV)
Age-basedGroupAge-basedRatingsPossible Content Selections Description
NR
(Not Rated) TV-NR
• Viewable
• Blocked
Not Rated.
Youth TV-Y
• Viewable
• Blocked
All children. The themes and elements in this program are specifically
designed for a very young audience, including children from ages 2-6.
TV-Y7
• FV Blocked
• Viewable
• Blocked Directed to older children. Themes and elements in this program may
include mild physical or comedic violence, or may frighten children 
under the age of 7.
Guidance TV-G
• Viewable
• Blocked
General audience. It contains little or no violence, no strong language,\
and little or no sexual dialogue or situations.
TV-PG
• D,L,S,V (all selected)
• Any combination of 
D, L, S, V Parental guidance suggested. The program may contain infrequent
coarse language, limited violence, some suggestive sexual dialogue 
and situations.
TV-14
• D,L,S,V (all selected)
• Any combination of 
D, L, S, V Parents strongly cautioned. This program may contain sophisticated
themes, sexual content, strong language and more intense violence.
TV-MA
• L,S,V (all selected)
• Any combination of 
L, S, VMature audiences only. This program may contain mature themes,
profane language, graphic violence, and explicit sexual content.
FV:  Fantasy/Cartoon Violence. V:  Violence S:  Sex L:  Offensive Language D:  Dialogue with sexual content.
 CANADIAN ENGLISH RATINGS (C. E. L. R.)
E Exempt - Exempt programming includes:  news, sports, documentaries and o\
ther information programming,
talk shows, music videos, and variety programming.
C Programming intended for children under age 8. No offensive language, nudity or sexual content.
C8+
Programming generally considered acceptable for children 8 years and ove\
r. No profanity, nudity or sexual content.G General programming, suitable for all audiences.
PG Parental Guidance suggested. Some material may not be suitable for child\
ren.
14+ Programming contains themes or content which may not be suitable for vie\
wers under the age of 14. Parents 
are strongly cautioned to exercise discretion in permitting viewing by p\
re-teens and early teens.
18+ 18+ years old. Programming restricted to adults. Contains constant viole\
nce or scenes of extreme violence.
 CANADIAN FRENCH RATINGS (C. F. L. R.)E Exempt - Exempt programming.
G General - Programming intended for audience of all ages. Contains no vio\
lence, or the violence content is 
minimal or is depicted appropriately.
8 ans+ 8+ General - Not recommended for young children. Programming intended fo\
r a broad audience but contains 
light or occasional violence. Adult supervision recommended.
13 ans+ Programming may not be suitable for children under the age of 13. Contai\
ns either a few violent scenes or one 
or more sufficiently violent scenes to affect them. Adult supervision strongly suggested.
16 ans+ Programming may not be suitable for children under the age of 16. Contai\
ns frequent scenes of violence or 
intense violence.
18 ans+ Programming restricted to adults. Contains constant violence or scenes o\
f extreme violence.
Caution
 The V-Chip system that is used in this set is capable of blocking “NR” \
programs (non rated, not applicable and none) as 
per FCC Rules Section15.120(e)(2). If the option of blocking “NR”\
 programs is chosen “unexpected and possibly confusing 
results may occur, and you may not receive emergency bulletins or any of the following ty\
pes of programming:”
  • Emergency Bulletins (Such as EAS messages, weather warnings and ot\
hers)
  • Locally originated programming • News • Political • Public\
 Service Announcements • Religious • Sports • Weather
UD@Q@@(5@FOH@JOEC


 UD@Q@@(5@FOH@JOEC


 






 
						

							57
FAQs, etc.
 Technical Information Ratings List for Lock
Technical Information
Closed Caption (CC)
 For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3; 
characters might be cut off).  
 The CC can be displayed on the TV if the receiver (such as a set-top box or satellite receiver) has t\
he CC set On using 
the Component or HDMI connection to the TV.  
 If the CC is set to On on both the receiver and TV when the signal is 480i (except for the HDMI connection), the CC 
may overlap on the TV.
 If a digital program is being output in analog format, the CC data will \
also be output in analog format. 
 If the recorder or output monitor is connected to the TV, the CC needs to be set up on the recorder or output monitor.
Aspect Ratio (FORMAT)
Press the FORMAT button to cycle through the aspect modes. This lets you choose the aspect depending on the format 
of the received signal and your preference. (p. 19) 
(e.g.:  in case of 4:3 image)
 FULL JUST
FULL JUST 
Enlarges the 4:3 image horizontally to the screen’s side edges.
(Recommended for anamorphic picture)Stretches to justify the 4:3 image to the four corners of the 
screen. 
(Recommended for normal TV broadcast)
 H-FILL 4:3
H-FILL 
Side bar
Enlarges the 4:3 image horizontally to the screen’s side 
edges. The side edges of the image are cut off. Standard
(Note that “Image retention” of the side bar may occur from
displaying it for a long time.)
 ZOOM
ZOOMNote
 480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9):  
  FULL, JUST, 4:3 or ZOOM
 1080p / 1080i / 720p:  
  FULL, H-FILL, JUST, 4:3 or ZOOM
Enlarges the 4:3 image to the entire screen. 
(Recommended for Letter Box)
 Zoom adjustments
  Vertical image position and size can be adjusted in “ZOOM”.
 
 Select “Zoom adjustments” on the “Picture” menu. (p. 36)
  V-position:  Vertical position adjustment    V-size:  Vertical size adjustment
 
 To reset the aspect ratio   (OK)
UD@Q@@(5@FOH@JOEC


 UD@Q@@(5@FOH@JOEC


 






 
						

							58
Technical Information (Continued)
Data format for SD Card /USB flash memory browsing
Photo: Still images recorded with digital still cameras compatible with JPEG/MP\
O files of DCF* and EXIF** standardsData format-Baseline JPEG (Sub-sampling: 4:4:4, 4:2:2 or 4:2:0)
Max. number of files - 9,999     Image resolution - 160 x 120 to 20,000,\
000
Movie: SD-Video Standard Ver. 1.2 [MPEG-2 (PS format)] and AVCHD Standard compatible files with an audio format that is  either MPEG-1/Layer-2 format or Dolby Digital format
(Modified data with a PC may not be displayed correctly.)
Music: MP3 format. (Some files cannot be played.) * DCF (Design rule for camera file system):  A Japan Electronics and Information Technology Industries Association’s standard ** EXIF (Exchangeable Image File Format
Note
  Format the card with the recording equipment.  The picture may not appear correctly on this TV depending on the recording equipment used.  Display may take some time when there are many files and folders. The function (VIERA Image Viewer/Media player) cannot display Motion JPEG and still image not DCF \
formatted (i.e. TIFF, BMP).  Data modified with a PC may not be displayed.  Images imported from a PC must be compatible with EXIF 2.0, 2.1 and 2.2.\
  Partly degraded files might be displayed at a reduced resolution.  All “.JPG” extension data in the card and USB flash memory will be\
 read in Photo viewer Mode.  The folder and file names may be different depending on the digital camera used.  Do not use two-byte characters or other special codes.  The card may become unusable with this TV if file or folder names are changed.  For the suitable SD Memory Cards, please confirm the latest information \
on the following website.
  http://panasonic.jp/support/global/cs (This site is in English only)
Cautions in handling SD Card
2.1 mm
32 mm
24 mm
 Use an SD Card which meets SD standards. If not, it may cause the TV to malfunction. Do not remove the card while the unit is accessing data (this can damag\
e card or unit). Do not touch the terminals on the back of the card. Do not subject the card to high pressure or impact. Insert the card in the correct direction (otherwise, card or unit may b\
e damaged). Electrical interference, static electricity or erroneous operation may d\
amage the data or card. Back up the recorded data at regular intervals in case of deteriorated o\
r damaged data or erratic operation 
of the unit. (Panasonic is not liable for any deterioration or damage o\
f recorded data.)
SD Card/USB flash memory warning messages
Message Meaning
Please insert SD Memory Card into the SD slot at the side of the TV.
/Please insert USB storage device into the slot at the side of the TV. The device is not inserted.
No photos/ No movies/No music files to play/ No playable media The device has no data or this type of data is not supported.
Cannot read file The file is broken or unreadable. The TV does not support the format.
Recommended USB device connections
A/B: each USB terminal
Number of 
USB device Connections (Recommended) MemoryWireless LAN 
adapterKeyboard
1 A: Flash memory A
A: Wireless LAN adapter A
A: Keyboard
A
2 A: Flash memory  B: Keyboard A B
A: Wireless LAN adapter  B:Keyboard A B
A: Flash memory  B:Wireless LAN adapter A B
UD@Q@@(5@FOH@JOEC


 UD@Q@@(5@FOH@JOEC










 
						

							59
FAQs, etc.
 Technical Information
VIERA LinkTM “HDAVI ControlTM”
HDMI connections to some Panasonic equipment allow you to interface auto\
matically. (p. 38) This function may not work normally depending on the equipment condition\
. The equipment can be operated by other remote controls with this functio\
n on even if the TV is in Standby mode. Image or sound may not be available for the first few seconds when playb\
ack starts. Image or sound may not be available for the first few seconds when input\
 mode is switched. Volume function will be displayed when adjusting the volume of the equipm\
ent. If you connect equipment that has “HDAVI Control 2 or later” function to the TV with an HDMI cable, the sound from the 
DIGITAL AUDIO OUT terminal can be output as multi-channel surround.
 “HDAVI Control 5” is the newest standard (current as of December, 2009) for the HDAVI Control compatible equipment.
  This standard is compatible with the conventional HDAVI equipment.
HDMI connection
HDMI (high-definition multimedia interface) allows you to enjoy high-d\
efinition digital images and high-quality sound by 
connecting the TV unit and the devices.
HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, su\
ch as a set-top box or a DVD player, can be connected 
to the HDMI connector using an HDMI compliant (fully wired) cable.
 HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard. If the external equipment has only a DVI output, connect to the HDMI ter\
minal via a DVI to HDMI adapter cable (*2). When the DVI to HDMI adapter cable is used, connect the audio cable to t\
he audio input terminal. Audio settings can be made on the “HDMI 1 in”, “HDMI 2 in” o\
r “HDMI 3 in” menu screen. (p. 36)
Applicable audio signal sampling frequencies (L.PCM):  48 kHz, 44.1 kH\
z, 32 kHz
  (*1):  The HDMI logo is displayed on an HDMI-compliant device. 
  (*2):  Enquire at your local digital equipment retailer shop.
Caution
 Use with a PC is not assumed. All signals are reformatted before being displayed on the screen. If the connected device has an aspect adjustment function, set the aspec\
t ratio to “16:9”. These HDMI connectors are “type A”. These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection. A device having no digital output terminal may be connected to the input \
terminal of either “COMPONENT”, or “VIDEO” to 
receive analog signals.
 The HDMI input terminal can be used with only the following image signal\
s:  480i, 480p, 720p, 1080i and 1080p.
Match the output setting of the digital device.
 For details of the applicable HDMI signals, see p. 61.
DIGITAL AUDIO OUT terminals
You can enjoy your Home theater by connecting a Dolby Digital (5.1 chann\
el) decoder and “Multi Channel” amplifier to the 
DIGITAL AUDIO OUT terminals. 
Caution
 Depending on your DVD player and DVD-Audio software the copyright protec\
tion function may operate and disable optical 
output.
 When an ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When an NTSC 
channel is selected, the output will be PCM.
  When playing a movie on SD Card Movie player, when the sound has been recorded in Dolby Digital, the output from the\
 
DIGITAL AUDIO OUT terminal will be Dolby Digital. When the sound is recorded in other for\
mats, the output will be PCM.
Picture mode
 Vivid:           Provides enhanced picture contrast and sharpness for viewing in a well-l\
it room. Standard:        Recommended for normal viewing conditions with subdued room lighting.  THX (2D mode):   Faithfully reproduces the image quality that the movie makers intended i\
n order to provide the 
ultimate cinematic experience at home.
 Cinema (3D mode): For watching movies in a darkened room. It provides a soft, film-like \
picture. Game:     For playing video games. This mode will be set automatically if “GAME” is selected from the\
 Input label setting (p. 53) Custom (Photo):   Customizes each item according to your taste. Photo is displayed in JPEG menu.
Note
 Picture mode will be automatically set to “Standard” if you change\
 the Input label from “GAME” to other labels. Picture mode will be automatically set to “Game” if you change fro\
m an Input label other than “GAME” to “GAME” label.
UD@Q@@(5@FOH@JOEC


 UD@Q@@(5@FOH@JOEC


 






 
						

							60
Technical Information (Continued)
Pro settings
  Reset to defaults: Resets all Pro setting adjustments to factory default settings.  W/B high R:      Adjusts the white balance for light red areas.  W/B high B:       Adjusts the white balance for light blue areas.  W/B low R:       Adjusts the white balance for dark red areas.  W/B low B:       Adjusts the white balance for dark blue areas. Black extension:   Adjusts the dark shades of the image in gradation. Gamma adjustment:  Gamma correction. Adjusts the intermediate brightness of the image. (S-curve/1.8/2.0/2.2/\
2.4/2.6) Panel brightness:   Selects the display panel brightness. (High/Mid/Low) Contour emphasis: Adjusts the contour emphasis of the image. (0-15) AGC:       Increases the brightness of dark signal automatically. (On/Off)  Save as default:  Save all “Picture” (when “Picture mode” is “Custom”)\
 and “Pro settings” adjustments.
H size
 Aspect Ratio: 4:3
Size 1 Size 2 The width will be decreased on both sides to 
reduce noise.
 Aspect Ratio: FULL/JUST(H-FILL/ZOOM)
Size 1Size 2 The width will be increased on both sides to 
reduce noise.
See page 36 for more information
4:3 side bars
Do not display a picture in 4:3 mode for an extended period, as this can\
 cause 
“Image retention” to remain on either or both sides of the display\
 field.
To reduce the risk of such “Image retention”, change the brightness\
 of the side 
bars.
See page 37 for more information
 The side bar may flash (alternate black/white) depending on the pictur\
e.
Side Bar 4:3
Screen
DisplayImage retention
Scrolling bar
Scrolling bar:   To prevent “Image retention”, scrolls white vertical bar from left \
to right on a black screen.  Press any key except the POWER key to return to previous screen.  You will return to the previous screen if no key operation has been perfo\
rmed for 15 minutes.
See page 37 for more information
[Scrolling bar]
2D →
3D (Simulated 3D)
  You can watch content in simulated 3D from photo and all video sources ex\
cept the PC input.  This function converts standard 2D images and displays them in 3D. For t\
his reason, the 3D images appear slightly different 
from the originals. Please bear this in mind when using this function.
  Using this function for profit-making purposes, or publically showing im\
ages converted from 2D to 3D in places such as coffee shops or hotels etc. may infringe on the rights of the copyright holder \
protected under the Copyright Act.
UD@Q@@(5@FOH@JOEC


 UD@Q@@(5@FOH@JOEC