Panasonic 42"50"58"65" Class 1080p Lcd Hdtv Tc L42e60 Owners Manual

							11
 Connections
Connection Panels
 
●For , ,  connections, 
please refer to p. 13
Back of the TV
USB1/2 
terminal
Ethernet
connector
Digital 
audio out 
						

							12
  Antenna or Cable connection
Power Cord
Connect after all other 
connections have been 
made.Back of the TV
Cable TV
VHF/UHF Antenna
or
Important: 
• Disconnect the power cord plug from the wall out 
first.
• The included power cord is for use with this unit 
only.
Insert the power cord plug (included) firmly into place.
VHF/UHF Antenna•  NTSC (National Television System Committee): Analog television system
ATSC (Advanced Television Systems Committee):
Digital TV Standards include digital high-definition television (HDTV), standa\
rd-definition television (SDTV), 
data broadcasting, multi-channel surround sound audio and interactive te\
levision.
 Cable 
●You need to subscribe to a cable TV service to enjoy viewing their programming. 
●A high-definition connection can be made using an HDMI or Component Video cable. (p. 13)
Note
 
●When using a Cable box, external equipment and video cables shown in thi\
s manual are not supplied 
with the TV.
 
●For additional assistance, visit us at:   www.panasonic.com/help
www.panasonic.ca 
						

							13
  AV cable connection
Best
Good
Basic
(Not HD)
  To use  HDMI terminals (Set-top-box / DVD recorder / Blu-ray Disc player / Camcorder / etc.)
L
R
HDMI
AV OUT
HDMI cable
DVI OUT
AUDIO OUTe.g. Blu-ray Disc 
player
e.g. Blu-ray Disc 
player
AV Equipment
AV Equipment
Audio cable
white
white
red red
HDMI-DVI 
Conversion cable
 To use  COMPONENT terminals (DVD recorder / Blu-ray Disc player / etc.)
L
R Y
P
B
PR
AUDIO
OUT
COMPONENT
VIDEO OUT
white red
green
bluered
e.g. Blu-ray Disc 
player
AV Equipment
white
red red
blue green
whitered red
blue
green
  To use  COMPOSITE terminals (Camcorder / Game system / DVD recorder / etc.)
L
RCOMPOSITE
OUT
yellow
white red
yellow
white
red
white
red yellow
e.g. Camcorder AV Equipment
Note
 
●In some cases, it is not possible to connect depending on the type of ca\
ble or 
equipment.
 
●The Green terminal is shared for both the COMPONENT and COMPOSITE (VIDEO IN) 
connection. When using COMPOSITE (VIDEO IN) connection, the Yellow connector 
(Video) should be inserted into Green connection. 
						

							14
  Audio connection
HDMI cable
HDMI OUT
    (ARC)
Optical cable
DIGITAL 
AUDIO INe.g. Amplifier with
speaker system
HDMI connection is available if connected audio equipment has ARC (Audio Return Channel) function.
  Please refer to eHELP (p.19) for Network connection, VIERA link connection or other connections.
Panasonic does not guarantee operation and performance of peripheral dev\
ices made by other 
manufacturers; and we disclaim any liability or damage arising from oper\
ation and/or performance 
from usage of such other maker’s peripheral devices. 
						

							15
Identifying Controls
TV controls/indicators
Note
  The TV consumes a small amount of electric energy even when turned off.  Do not place any objects between the TV remote control sensor and remote control.
•  An image of the control panel is displayed on the screen while in use.
C.A.T.S. (Contrast Automatic Tracking System)
 Power indicator ( on: red, off: no light)
Front of the TV
Remote control sensor
Maximum range for remote is 23 feet 
(7 meters) from front of TV set
Back of the TV
Volume up/down Selects channels 
in sequence
POWER button
Changes the input mode
Selects Menu and Submenu entries
(Press and hold down for MENU function) 
						

							16
 Remote control
Switches TV On or Off (Standby) Set Sleep timer Closed caption On/Off
Switches surround sound setting
Displays Main Menu
Displays or removes the 
information banner
Displays Apps (application) list. 
Displays Option Menu for special 
functions (when available)
 Colored buttons 
(used for various functions) Sound mute On/Off
 Volume up/down
Use for digital channels
Accesses NETFLIX service directly 
•  This service requires an Internet  connection.
•  This service might be stopped or the  conditions changed without notice.
Operates the Favorite channel list functionChanges aspect ratio and zoom
Selects Secondary Audio Programming
 Exits from menu screen
Displays Home Screen
Select source to watch
Selects/OK/Change
Go back to previous menu
Channel up/down, when viewing from 
ANT/Cable source
Numeric keypad to select any channel or 
press to enter alphanumeric input in menus
 Switches to previously viewed 
channel or input
External equipment operations
*  Functions are switched depending on 
connected external equipment and 
operation.
:  Press and hold to skip 
backward/forwardViewing from external media
Displays eHELP (built-in manual) 
(p. 19) 
						

							17
First Time Setup
The first time setup screen is displayed only when the TV is turned on for the first time, after 
the power cord is inserted into a wall outlet.
or
Turn the TV on with the POWER button
or
(Remote)
(TV)
Setup the following items
 
●Select your language
 
●Select your country
 
●Select your viewing mode (Be sure to select “Home Use”)If you select “Store Demonstration” by mistake, confirmation scree\
n 
will be displayed.
To display the “Set viewing mode” screen again in order to select 
“Home Use”, perform one of the following actions:
•  Press and hold down the rear POWER button for at least five  seconds.
•  Unplug the power cord for 30 seconds and then plug it in again.
 
●Configure Network connection
Follow the instructions on screen to complete the Network 
connection.
 
●ANT/Cable setup
Set up based on how your TV programming is connected. Select 
“Yes” if you are connected to a Cable, Satellite or Fiber Optic box. 
Select “No” if you are connected to the Antenna/Cable In with a 
coaxial wire into the screw-on connector. In this case you will need 
to scan for channels that are available in your area.
 
●Adjust the Clock
Select the clock mode and adjust other settings.
When “Auto” is selected, clock will be set automatically according\
 
to Time zone and DST. The TV must be connected to the Internet to 
use this feature.
 
●Complete First time setup
Completion screen is displayed.
Select type of Home Screen
The “Tutorial” for “my Home Screen” starts.
Follow the instruction of the 
“Tutorial” to select desired “Home Screen”.
Example: Home screen selectionExample: Lifestyle Screen
•  “Home Screen” is displayed as the start-up screen when the TV is  turned on or the HOME button is pressed. 
						

							18
Operations 
Turn power on
or
(Remote)
(TV)
The last viewed Home Screen is displayed each time the TV is turned on.
Example: Selected content screenExample: Lifestyle Screen
 
●To return to “Home Screen” at any time.
 
●You can customize “Home Screen” and display desired information, ac\
cess specific features easily, 
select the default “Home Screen”, etc. For details, follow the on-\
screen instructions or refer to the eHELP 
(Watching TV > my Home Screen > Settings) 
Watching TV
Select the TV viewer from “Home Screen”
 select
 access
To watch TV via a Cable box, Satellite receiver, or any other source (DVD, DVR, gaming device, 
etc.), press the INPUT button and select the appropriate input. 
To access each feature
Access “Apps list” and select a featureExample: Apps  list 
●Apps is the applications (features) of the TV. 
●For operations of each feature and the setup of “Apps 
list”, follow the on-screen instructions or refer to the 
eHELP (Convenience features > Using Apps list). 
						

							19
Display eHELP[Top page]When you enter 
eHELP again 
after exiting, the 
confirmation screen 
is displayed while the 
TV is turned on.
You can select “TOP 
PAGE” or “LAST 
PAGE”.
Select the desired page from the menu
 Next
 Select
 Next
 Select
 Next(If available)
Scroll up/down
(If available the scroll 
bar appears.)
Submenus Desired pageCategories Menus
 Select
   To exit 
eHELP
  To return to 
the previous 
menu/layer
 
■Jump to menu item
Display the menu related to the explanation page.
 
●The menu item is not available depending on situation or condition.
Using eHELP (Built-in Manual)
eHELP is a built-in manual that explains how to easily operate the TVs features. Press the 
eHELP button to access the guide. 
						

							20
Frequently Asked Questions (FAQ)
How can I confirm 
that my TV is working 
properly?  The TV has a built in Self Test. On the remote control, press MENU and scroll down and select HELP to access the TV SELF 
TEST. Run the test and follow the on screen instructions.
Why doesn’t the remote 
control work?
  Check that the batteries are fresh, are of the same type and are installed with the correct polarity (+ & -).
  To operate other devices, such as changing channels when using Cable or Satellite boxes, or operating non-Panasonic Blu-ray 
players, use the remote supplied with the device.
Why is there no picture 
or just a blue, black or 
snowy screen being 
displayed?
  Ensure that the power cord is plugged in and the TV is turned on (front red LED light should be on, not blinking).
  Press the INPUT button on the remote to select the correct input source.
  Ensure all connections are correct and secure.   When using external video source, such as a Cable/Satellite box or DVD player, ensure that the device is on and functioning 
correctly.
  Press MENU on the TV’s remote control. If the menu is displayed, then the TV is working; recheck above steps.
Why is the screen blank 
and the power indicator 
blinking?  The TV has gone into shutdown mode to protect itself. Try unplugging it for a few minutes and connecting it again. If there 
was a temporary power surge on the AC line it may now be OK. If 
the  blinking returns, call 1-877-95-VIERA (U.S.A.) or 1-866-330-
0014 (Canada).
Questions Answers