Panasonic 42"47"55" Class 1080p Lcd Hdtv Tc L42e50 Owners Manual
Here you can view all the pages of manual Panasonic 42"47"55" Class 1080p Lcd Hdtv Tc L42e50 Owners Manual . The Panasonic manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 1
manual electrónico Owner’s Manual 42”/47”/55” Class 1080p LCD HDTV (42.0/47.0/54.6 inches measured diagonally) Manual de usuario Televisión de alta definición de 1080p y clase 42”/47”/55” de LCD (42,0/47,0/54,6 pulgadas medidas diagonalmente) For assistance (U.S.A./Puerto Rico), please call:1-877-95-VIERA (958-4372)www.panasonic.com/help For assistance (Canada), please call:1-866-330-0014concierge.panasonic.ca Para solicitar ayuda (EE.UU./Puerto Rico), llame al: 1-877-95-VIERA...
Page 2
2 This product incorporates the following software or technology:(1) the software developed independently by or for Panasonic Corporati\ on, (2) the software owned by third party and licensed to Panasonic Corpor\ ation, (3) the software based in part on the work of the Independent JPEG Gro\ up, (4) the software developed by the FreeType Project, (5) the software licensed under the GNU LESSER GENERAL PUBLIC LICENSE (LGPL) and/or, (6) open sourced software other than the software licensed under the L\...
Page 3
3 VIERA Link™ is a trademark of Panasonic Corporation. HDMI, the HDMI logo and High- Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. SDXC Logo is a trademark of SD- 3C, LLC. “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance. QuickTime...
Page 4
4 ANTENNA LEAD-IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) ELECTRIC SERVICE EQUIPMENT GROUND CLAMP EXAMPLE OF ANTENNA GROUNDING AS PER (NEC) NATIONAL ELECTRICAL CODE Safety Precautions Note to CATV System Installer This reminder is provided to direct the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and,...
Page 5
5 19) An outside antenna system should not be located in the vicinity of overh\ ead power lines, other electric light, power circuits, or where it can fall into such power lines or circuits. When installing an \ outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them mig\ ht be fatal. 20) Unplug this LCD TV from the wall outlet and refer servicing to qualified service personn\ el under the following conditions: a. When the power...
Page 6
6 FCC and IC STATEMENT This equipment has been tested and found to comply with the limits for a\ Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmf\ ul interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy an\ d, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. H\ owever, there is no...
Page 7
7 CEA CHILD SAFETY NOTICES WARNING Flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations. Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause personal injury or even death. The consumer electronics industry (of which Panasonic is a member) is committed to making home entertainment enjoyable and safe. To prevent personal injury or...
Page 8
8 Optional Accessories Please contact your nearest Panasonic dealer to purchase the recommended\ optional accessories. For additional details, please refer to the optional accessories installation manual. Wireless LAN Adaptor for VIERA and exclusive stand ●TY-WL20U • To use the Wireless LAN Adaptor for VIERA, an access point needs to be obtained. • It is recommended to use the Wireless Adaptor for VIERA with its exclusive stand. • To avoid malfunctions caused by radio wave interference, keep...
Page 9
9 Attaching the pedestal to TV ■Assembling the pedestal Fix securely with assembly screws A (Total 4 screws). Tighten screws firmly. Accessories Assembly screws (4 of each) A XSS5+15FNK size (M5 x 15) B XYN4+F25FJK size (M4 × 25) Bracket (1) TBL5ZA32821 Base (1) TBL5ZX0268 (for 42”) TBL5ZX0270 (for 47”) TBL5ZX03841 (for 55”) A Bracket Front BaseMake sure that the bracket is anchored before fixing the screws. (Image) ■Set-up Tighten assembly screws B (total 4 screws) loosely at...
Page 10
10 Installing the remote’s batteries Pull open Hook Note the correct polarity (+ or -). Close Caution Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control. • Do not mix old and new batteries. • Do not mix different battery types (such as alkaline and manganese batteries). • Do not use rechargeable (Ni-Cd) batteries. Do not burn or break batteries. Power cord connection • When disconnecting the power cord, be absolutely sure to disconnect...