Panasonic 42"46"50" Class 720p Plasma Hdtv Tc P4232 Owners Manual
Have a look at the manual Panasonic 42"46"50" Class 720p Plasma Hdtv Tc P4232 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Owner’s Manual 42”/46”/50” Class 720p Plasma HDTV (41.6/46.0/49.9 inches measured diagonally) Manual de usuario Televisión de alta definición de 720p y clase 42”/46”/50” de Plasma (41,6/46,0/49,9 pulgadas medidas diagonalmente) For assistance (U.S.A./Puerto Rico), please call:1-877-95-VIERA (958-4372)www.panasonic.com/help For assistance (Canada), please call:1-866-330-0014www.vieraconcierge.ca Para solicitar ayuda (EE.UU./Puerto Rico), llame al: 1-877-95-VIERA (958-4372)www.panasonic.com/help Gracias por su decisión de comprar este producto marca Panasonic. Lea estas instrucciones antes de utilizar su televisor y guárdelas pa\ ra consultarlas en el futuro. Las imágenes mostradas en este manual tienen solamente fin\ es ilustrativos. Model No. Número de modelo TC-P4232C TC-P4632C TC-P5032C Español EnglishThank you for purchasing this Panasonic product. Please read these instructions before operating your set and retain them\ for future reference. The images shown in this manual are for illustrative purposes only. TQB2AA0624
2 ■Do not display a still picture for a long timeThis causes the image to remain on the plasma screen (“Image retention”). This is not considered a malfunction and is not covered by the warranty. 4 : 312 To prevent the “Image retention”, the screen saver is automatically activated after a few minutes if no signals are sent or no operations are performed. Typical still images ●Channel number and other logos ●Image displayed in 4:3 mode ●SD Card photo ●Video game ●Computer image ■Set up ●Do not place the unit where it’s exposed to sunlight or other bright light (including reflections). ●Use of some types of fluorescent lighting may reduce the remote control’\ s transmission range. Experience an amazing level of multimedia excitement SD memory card Camcorder Amplifier with Speaker system Cable box DVD player/ Blu-ray Disc player DVD recorder/ Blu-ray Disc recorder VCR Enjoy rich multimedia
3 Basic Advanced Support Information Getting started VIERA Link™ is a trademark of Panasonic Corporation. HDMI, the HDMI logo and High- Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. SDXC Logo is a trademark of SD- 3C, LLC. This product qualifies for ENERGY STAR in the “Home Use” setting and this is the setting in which energy savings will be achieved. Any modifications to the “Home Use” setting or other factory default settings could result in greater energy consumption beyond levels that meet ENERGY STAR qualifications. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. HDAVI Control™ is a trademark of Panasonic Corporation. TM • Watching TV ··················\ ··················\ ············· 16 • Using VIERA TOOLS ··················\ ··················\ 19 • Watching content from external devices ······· 20 • Viewing photo with VIERA IMAGE VIEWER ······· 21 • VIERA LinkTM “HDAVI ControlTM” ··················\ ·· 24 • Editing and Setting Channels ··················\ ····· 30 • How to Use Menu Functions··················\ ······· 32• Picture settings ··················\ ··················\ ······· 33• Audio settings ··················\ ··················\ ········· 34• Timer settings ··················\ ··················\ ········· 34• Lock ·················\ ··················\ ··················\ ······· 35• Closed caption ··················\ ··················\ ········ 35• Setup ·················\ ··················\ ··················\ ····· 36 • Ratings List for parental control ··················\ ·· 37 • Technical Information ··················\ ··················\ 38 • Care and Cleaning ··················\ ··················\ ···· 41 • Frequently Asked Questions (FAQ) ·············· 42 • Specifications··················\ ··················\ ············ 44 • Index ·················\ ··················\ ··················\ ········ 45 • Limited Warranty (for U.S.A. and Puerto Rico only) ················· 46 • Customer Services Directory (for U.S.A. and Puerto Rico) ··················\ ······· 47 • Limited Warranty (for Canada) ··················\ ··· 48 Basic Features Advanced Features Support Information • Safety Precautions··················\ ··················\ ······ 4 Please read before using the unit • Accessories/Optional Accessory··················\ ··· 7 • Connections ···············\ ··················\ ················· 10 • Identifying Controls ··················\ ··················\ ··· 12 • First Time Setup··················\ ··················\ ········ 13 Getting started Contents
4 Safety Precautions WARNING:To reduce the risk of fire or electric shock, do not expose this apparatu\ s to rain or moisture. Do not place liquid containers (flower vase, cups, cosmetics, etc.) ab\ ove the set (including on shelves above, etc.). Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service p\ ersonnel. The lightning flash with arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments / accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected. WARNING/CAUTION (TV set) WARNING Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being played with by young children, creating the potential risk of suffocation. ■Set up This Plasma TV may fall and can cause personal injury or even death if not installed correctly. To prevent personal injury or death, follow these warnings: ●Install the Plasma TV in accordance with the manufacturer’s recommended pedestal or stand, corresponding hardware and installation instructions. This Plasma TV is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability. The following accessories are manufactured by Panasonic Corporation.• Wall-hanging bracket (Angled) TY-WK4P1RW ●Be sure to ask a qualified technician to carry out the installation and set-up. Two or more people are required to install or remove the television. ●Some wall mounts (wall-hanging brackets) are not designed to be mounted to walls with steel studs or old cinder block constructions. Ask your dealer or licensed contractor to properly secure the wall-hanging bracket. ●Do not route the TV’s power cord inside the wall. The power cord was not designed for in-wall mounting. Doing so can lead to fire hazard. ●Do not place the Plasma TV or its stand on a sloped or unstable surface. The Plasma TV may fall or tip over. ●Do not support the Plasma TV on a non-specified pedestal. ●Do not place the Plasma TV on furniture that can easily be used as steps, such as a chest of drawers. ●Do not climb or allow children to climb on the Plasma TV ●Place or install the Plasma TV where it cannot be pushed, pulled over or knocked down. ●Route all cords and cables such that they cannot be tripped over or pulled by curious children.
5 ●Do not place any objects on top of the Plasma TV. If water spills onto the Plasma TV or foreign objects get inside it, a short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the Plasma TV, please consult an Authorized Service Center. In the unlikely event that you receive a shock from this product it is possible that your household outlet may be wired improperly. Have an electrician verify that the TV’s outlet is properly wired. If the symptom persists, have the TV serviced by a qualified authorized technician. ●To prevent the spread of fire, keep candles or other open flames away from this product at all times ■AC Power Supply CordTo prevent fire or electric shock: ●The Plasma TV is designed to operate on a 120 V AC, 60 Hz service. Insert the power cord plug as far as it will go into the wall socket. If the plug is not fully inserted, heat may generate, which could cause a fire. ●The included power cord is for use with this unit only. ●Do not use any power cord other than that provided with this TV. ●Do not handle the power cord plug with wet hands. ●Do not do anything that might damage the power supply cord. ●When disconnecting the power supply cord, hold the plug, not the cord. ●Do not use the power supply cord if the plug or cord is damaged. Replace the cord or contact your Authorized Service Center. ●Do not use a 3-prong to 2-prong AC plug adapters to connect your TV’s plug to the wall outlet. Doing so will defeat the TV plug’s safety feature, which can lead to a shock hazard. If the wall outlet does not accommodate a 3-prong plug, have a qualified electrician replace your outlet and check the associated wiring. ■Handling the power supply cord ●Insert the power plug fully into the socket outlet. (If the power plug is loose, it could generate heat and cause fire.) ●Ensure that the power plug is easily accessible. ●Ensure the earth pin on the power plug is securely connected to prevent electrical shock. • An apparatus with CLASS I construction shall be connected to a power socket outlet with a protective earthing connection. ●Do not touch the power plug with a wet hand. (This may cause electrical shock.) ●Do not use any power cord other than that provided with this TV. (This may cause fire or electrical shock.) ●Do not damage the power cord. (A damaged cord may cause fire or electrical shock.) • Do not move the TV with the cord plugged in the socket outlet.• Do not place a heavy object on the cord or place the cord near a high-temperature object. • Do not twist the cord, bend it excessively, or stretch it. • Do not pull on the cord. Hold onto the power plug body when disconnecting cord. • Do not use a damaged power plug or socket outlet. ●If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the Plasma TV, unplug the power supply cord immediately. Continued use of the TV under these conditions might cause a fire or permanent damage to the TV. Have the TV evaluated by an Authorized Service Center. Servicing of the TV by unauthorized personnel is strongly discouraged due to its high voltage. ●If water or an object gets inside the Plasma TV, if the Plasma TV is dropped, or if the enclosure becomes damaged, unplug the power supply cord immediately. A short-circuit may occur, which could cause a fire. Contact an Authorized Service Center for an evaluation. CAUTION ●Do not cover the ventilation holes. Doing so may cause the Plasma TV to overheat, which can cause a fire or damage to the Plasma TV. ●Leave a space of 3 15/16” (10 cm) or more at the top, left and right, and 2 3/4” (7 cm) or more at the rear. ●When using the pedestal, keep the space between the bottom of the TV and the pedestal or stand surface clear from objects that may obstruct ventilation. ■When Moving the Plasma TV ●Be sure to disconnect all cables before moving the Plasma TV. Moving the TV with its cables attached might damage the cables which, in turn, can cause fire or electric shock. ●To prevent an electric shock, disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning. ●Transport only in upright position. Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry. ●Using a dry cloth, clean any dust from the power supply cord and plug regularly. Build-up of dust on the power cord plug can increase humidity, which might damage the insulation and cause a fire. This Plasma TV radiates infrared rays; therefore, it may affect other infrared communication equipment. Install your infrared sensor in a place away from direct or reflected light from your Plasma TV. The TV will still consume some power as long as the power supply cord is connected to the wall outlet. ●Display panel is made of glass. Do not apply strong force or impact to the display panel. This may cause damage resulting in injury. ●The TV is heavy. TV should be handled by 2 or more people. Support as shown to avoid injury by the TV tipping or falling.
6 FCC STATEMENT This equipment has been tested and found to comply with the limits for a\ n Other Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmf\ ul interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy an\ d, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Ho\ wever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful\ interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by o\ ne or more of the following measures:• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the Panasonic Service Center or an experienced radio/TV technici\ an for help. FCC Caution: To assure continued compliance, follow the attached installation instruct\ ions and use only shielded interface cables when connecting to peripheral devices. Any changes or modifications not expressly approved by Panasonic Corp. o\ f North America could void the user’s authority to operate this device. Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Contact Source: Panasonic Consumer Electronics Company 1-877-95-VIERA (958-4372) email: [email protected] CANADIAN NOTICE: For Model TC-P4232C, TC-P4632C, TC-P5032C This Class B digital apparatus complies with Canadian ICES-003. CEA CHILD SAFETY NOTICES WARNING Flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations. Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause personal injury or even death. The consumer electronics industry (of which Panasonic is a member) is committed to making home entertainment enjoyable and safe. To prevent personal injury or death, be sure to follow the following safety guidelines: TUNE INTO SAFETY: • One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of your flat panel display. • Carefully read and understand all enclosed instructions for proper use of this product. • Don’t allow children to climb on or play with furniture and television sets. • Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers. • Remember that children can become excited while watching a program, especially on “larger than life” flat panel displays. Care should be taken to install the display where it cannot be pushed, pulled over, or knocked down. • Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children. WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS: • Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL). • Follow all instructions supplied by the display and wall mount manufacturers. • If you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional installation. • Make sure the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer. • A minimum of two people are required for installation. Flat panel displays can be heavy. Panasonic recommends that a qualified installer perform the wall-mount installation. See page 4. The American Academy of Pediatrics discourages television viewing for children younger than two years of age.
7 Getting started Accessories/Optional Accessory Accessories/Optional Accessory Accessories Remote Control Transmitter N2QAYB000570 Batteries for the Remote Control Transmitter (2) AA Battery AC cord Accessories Check you have all the items shown. Pedestal TBLX0134 (TC-P4232C) TBLX0135 (TC-P4632C, TC-5032C) Quick start guide Owner’s Manual Product Registration Card (U.S.A.) Child safety How to assemble (p. 8) Optional AccessoryPlease contact your nearest Panasonic dealer to purchase the recommended\ wall-hanging bracket. For additional details, please refer to the wall-h\ anging bracket installation manual. Wall-hanging bracket (angled) TY-WK4P1RW a: 15.7” (400 mm) b: 11.8” (300 mm) Rear of the TVHoles for wall-hanging bracket installation Screw for fixing the TV onto the wall-hanging bracket (not supplied with the TV) Depth of screw: minimum 0.59” (15.0 mm), maximum 1.18” (30.0 mm) (View from the side) a b Warning In order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licensed contractor to secure the wall-hanging brackets. Carefully read the instructions accompanying optional accessories, and b\ e absolutely sure to take steps to prevent the TV from tipping over. Handle the TV carefully during installation since subjecting it to impact or other \ forces may cause product damage. Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging the bracket. When using the angled-type wall hanging bracket, please ensure that ther\ e is sufficient space for the connecting cables not to press against the wall when the TV is tilted forward. For safety reasons, remove units no longer being used from their wall-mo\ unted locations. M8
8 Accessories Assembly screws (4 of each) A XYN5+F18FN size (M5 × 18) (Silver) B THEL078N (for 42”)THEL080N (for 46”/50”) size (M5 × 30) (Black) Poles (2) LR L or R is printed at the bottom of the poles. Base (1) Attaching the pedestal to TV ■Assembling the pedestal Fix securely with assembly screws A (Total 4 screws). Tighten screws firmly. A L RPole Front Pole Base (image: TBLX0134) ■Set-up Carry out work on a horizontal and level surface. Tighten screws firmly. (image: TC-P4232C) B Fix securely with assembly screws B (Total 4 screws). Rear side Arrow mark Pole Hole for pedestal installation Pole Base Bottom view Warning Do not disassemble or modify the pedestal. Otherwise the TV may fall over and become damaged, and personal injury may result. Caution Do not use any pedestal other than that provided with this TV. Otherwise the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged. If you use the pedestal when it is physically damaged, personal injury m\ ay result. Contact your nearest Panasonic Dealer immediately. During set-up, make sure that all screws are securely tightened. If sufficient care is not taken to ensure screws are properly tightened during\ assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may res\ ult.
9 Getting started Accessories/Optional Accessory Installing the remote’s batteries Open Hook Note the correct polarity (+ or -). Close Caution Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control. • Do not mix old and new batteries. • Do not mix different battery types (such as alkaline and manganese batteries). • Do not use rechargeable (Ni-Cd) batteries. Do not burn or break batteries. Power cord connection To attach To remove Insert it firmly until the tabs on both sides click into place. Keep pushing both sides until they snap and pull.
10 Connections Connection Panels Power Cord (Connect after all the other connections have been made.)VHF/UHF Antenna • NTSC (National Television System Committee): ATSC (Advanced Television Systems Committee): Digital TV Standards include digital high-definition television (HDTV), standa\ rd-definition television (SDTV), data broadcasting, multichannel surround-sound audio and inter\ active television. Back of the TV Cable TV VHF/UHF Antenna or * See page 9 (Power cord connection) ■Antenna terminal ■Pin terminals ■HDMI terminal greenbluered green ●Firmly tighten by hand. ●Match colors of plugs and terminals. ●Insert firmly. ●Insert firmly. Connection references Antenna or Cable connection Cable ●You need to subscribe to a cable TV service to enjoy viewing their programming. ●You may need to subscribe to a high-definition (HD) cable service to en\ joy HD programming. The connection for high-definition can be done with the use of an HDMI o\ r Component Video cable. (p. 11) Note ●When using a Cable box, external equipment and video cables shown in thi\ s manual are not supplied with the TV. ●When disconnecting the power cord, be absolutely sure to disconnect the \ power cord plug from the wall outlet first. ●For additional assistance, visit us at: www.panasonic.com/help www.panasonic.ca B C A Back of the TV DIGITAL AUDIO OUT SD card slot (p.21) Front of the TV