Panasonic 3D Eyewear TY-EW3D2LU, TY-EW3D2MU, TY-EW3D2SU Operating Instructions

Operating Instructions3D Eyewear
TY-EW3D2LU
TY-EW3D2MU
TY-EW3D2SU
Model No.
Thank you for purchasing a Panasonic product.
 
 
Before operating this product, please read the instructions carefully, and save this 
manual for future use.
 
 
Before using this product, be sure to read “Safety Precautions" (
pages  2 - 4 ).
TQZJ320
This product cannot be used as 
sunglasses.  (Shown as TY-EW3D2MU)
Contents
Safety Precautions ······························ 2
Identifying Controls...

2 - ENGLISH
Safety Precautions
Danger
About Prohibition of Heating„„ Do not put 3D Eyewear in fire, heat it or leave it in places that can 
get hot. 
3D Eyewear contains a lithium-ion polymer rechargeable battery, so heating may result 
in combustion or rupture that may cause burns or fire.
Warning
About Prevention of Accidental Ingestion
„„ Do not store any 3D
 E

yewear parts in places where small children 
can reach.
There is a danger small children could swallow such parts by...

ENGLISH - 3
Caution
About 3D Eyewear„„ Do not drop, exert pressure on, or step on the 3D
  Eyewear.
Doing so may damage the glass section, which may result in injury. 
 
Always store the 3D
  Eyewear in the case provided when not in use.
„„Be careful of the tips of the frame when putting on the 
3D
  Eyewear.
Accidentally inserting the tip of the frame into the eye may cause injury.
„„Always keep the 3D   Eyewear in a cool, dry place.Failure to do so may cause fire or...

4 - ENGLISH
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee...

ENGLISH - 5
Identifying Controls
(Shown as TY-EW3D2MU)„„Liquid Crystal Shutter 
(lens) 
Controls the images for 3D 
viewing.
The left and right liquid crystal 
shutters are alternately opened 
and closed in time with the left 
side and right side images that 
are alternately displayed on the 
television to achieve the 3D effect.
„„ Infra-red receiver Receives infra-red signals from the television. 
The liquid crystal shutter open/close timing is controlled by receiving 
infra-red...

6 - ENGLISH
Using Precautions
„„Liquid Crystal Shutter (Lens) 
 
Do not apply pressure to the liquid crystal shutter. Also, do not drop or bend the 
3D
  Eyewear.
 
 
Do not scratch the surface of the liquid crystal shutter with a pointed instrument etc.  
Doing so may cause damage to the 3D
  Eyewear, and reduce the quality of the 3D 
image.
„„ Infra-red receiver section 
 
Do not soil the infra-red receiver section or attach stickers etc. to it.
•
 Doing so may prevent the receiver...

ENGLISH - 7
„„Viewing 3D images 
 
When watching 3D movies, take an appropriate length break after watching a 
movie.
 
 
When watching 3D content on interactive devices such as 3D games or computers, 
take an appropriate length break after using for 30
  -   60 minutes.
Prolonged use may cause eyesight fatigue.
Accessories
 
 
< > indicates the quantity.
 „3D
  Eyewear case ············· ·········· „Charging cable ·············
·············· „Ferrite core

 ·············...

8 - ENGLISH
Viewing the 3D Image
NOTE
• Charge the 3D  Eyewear before using the first time after purchase or after long 
periods of disuse.
„„ Using the television menu controls, set so that 3D images are 
shown.
1. (When 3D image signals are being received) press the MENU button on 
the television remote control.
2.
 
Select "Setup", and press the OK button.
3.

 
Select "3D settings", and press the OK button.
4.

 
Select "3D
   Eyewear", and use 
 to select...

ENGLISH - 9
Charging
„„Charging the 3D Eyewear1. Turn off the television power, and set the 3D Eyewear power switch to 
“OFF”.
2.
 
Connect as shown in the diagram, and turn on the television power.• The indicator lamp lights red, and charging starts.
•  When the indicator lamp turns off, charging is complete. 
(Approximately 2 hours required)
3. Turn off the television power, and remove the charging cable.
Mini USB connector USB connector
NOTE
• For the USB terminal, see the television...

10 - ENGLISH
Disposal
A lithium-ion polymer rechargeable battery is built in to the 3D Eyewear. Please 
discard according to local regulations. 
When disposing this product, disassemble properly by following the procedure on 
the next page, and remove the internal rechargeable battery.
Do not disassemble this product except when disposing of it.
Danger
„„As the rechargeable battery is specifically for this product, do not 
use it for any other device.
Do not charge the removed battery.
 
 
Do...